• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.123-129
• /
• 2013

This study investigated the rate of setup variance by the rotating unbalance of gantry in image-guided radiation therapy. The equipments used linear accelerator(Elekta Synergy TM, UK) and a three-dimensional volume imaging mode(3D Volume View) in cone beam computed tomography(CBCT) system. 2D images obtained by rotating $360^{\circ}$and $180^{\circ}$ were reconstructed to 3D image. Catpan503 phantom and homogeneous phantom were used to measure the setup errors. Ball-bearing phantom was used to check the rotation axis of the CBCT. The volume image from CBCT using Catphan503 phantom and homogeneous phantom were analyzed and compared to images from conventional CT in the six dimensional view(X, Y, Z, Roll, Pitch, and Yaw). The variance ratio of setup error were difference in X 0.6 mm, Y 0.5 mm Z 0.5 mm when the gantry rotated $360^{\circ}$ in orthogonal coordinate. whereas rotated $180^{\circ}$, the error measured 0.9 mm, 0.2 mm, 0.3 mm in X, Y, Z respectively. In the rotating coordinates, the more increased the rotating unbalance, the more raised average ratio of setup errors. The resolution of CBCT images showed 2 level of difference in the table recommended. CBCT had a good agreement compared to each recommended values which is the mechanical safety, geometry accuracy and image quality. The rotating unbalance of gentry vary hardly in orthogonal coordinate. However, in rotating coordinate of gantry exceeded the ${\pm}1^{\circ}$ of recommended value. Therefore, when we do sophisticated radiation therapy six dimensional correction is needed.

• Journal of the Korean Magnetics Society
• /
• v.8 no.2
• /
• pp.57-61
• /
• 1998

The complex magnetic susceptibility of as-quenched and proton irradiated amorphous ribons of $FE_{81}B_{13.5}Si_{3.5}C_2$ was measured in the frequency range 10 KHz~ 10 MHz. The frequency spectra of real and imaginary parts of susceptibility showed a typical Debye-type relaxation. Relatively high relaxtion frequency, ~3 MHz observed in the present work suggented that domain rotation is involved in the relaxation process. The susceptibility at the low frequency decreased with the irradiation, while that at high frequency increased due to the increasing defect density. The relaxation frequency of domain roation shifted toward higher frequency, due to the increasing pinning force against domain motion by the irradiation.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.213-217
• /
• 2010

Purpose: To emphasize the necessity of post-fitting by follow-up test, the mis-alignment was analyzed after initial wearing of toric soft contact lenses (TSCL). Methods: After trial contact lenses were worn to 87 eyes with myopic astigmatism for 1 week, we observed the alignment of axis mark on trial contact lenses using slit lamp and corrected the rotated axis by method of LARS. After final fitting, rotation ratio, rotation degree and rotation position were analyzed compared to initial prescription divided to amount of cylinderical and spherical powers. Results: Rotation ratio of TSCL's axis was increased as increment of both cylinderical powers and (-)spherical powers. An average of rotation degree was $10^{\circ}{\sim}13^{\circ}$ which was not related to amount of their powers. Rotation position of TSCL's axis was more to temporal than to nasal. Conclusions: Because mis-alignment of axis after TSCL wearing induce the poor sight, adjustment of axial alignment as a result of follow-up must be performed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1114-1121
• /
• 2012

There is a cause and effect relationship in that brain injury causes impairment of mental rotation and ultimately independent functional activities. The purpose of this study was to compare the effects of mental rotation on reaction time and precision between the normal adults and chronic hemiparetic stroke patients. Thirty-one patients with chronic hemiparetic stroke and twenty normal adults participated in this study. The participants conducted 2 types of tasks for mental rotation: a comparison task using mirror images, and a rotation task using angular disparity images for 2 different 3-dimensional objects. Each of the 3 possible angled shapes ($90^{\circ}$, $180^{\circ}$, and $270^{\circ}$) appeared in each pair. The test consisted of 6 mirror-reflected image pairs and 6 angular disparity image pairs visualized during angular rotation, and 12 test periods. The subjects were judged on how accurately and rapidly they could distinguish between the mirrored and non-mirrored pairs. The study measured reaction time and precision to compare the effect of mental rotation tasks. Reaction time during all 3 angular conditions were significantly longer in the stroke patients than that in the normal adult during the comparison tasks and the rotation tasks. In addition, precision during mental rotation tasks was not significantly different between normal adults and stroke patients. Our results suggest that rehabilitation therapists should keep in mind that mental rotation is more difficult in stroke population than in normal adults.

• Resources Recycling
• /
• v.12 no.5
• /
• pp.36-41
• /
• 2003

Although slag has an enough potential as the secondary resources due to its high content of iron, quite a large amount of slags are simply landfilled when market prices of iron and steel are not so beneficial. The purpose of this study is to investigate the basic characteristics regarding the recovery of iron content from slag by magnetic separation method for the enhancement of its recycling rate. Three kinds of slags such as blast furnace slag, water-cooled converter slag, and air-cooled converter slag were tested taking the strength of magnetic field, revolving speed of drum, and feeding rate of slag as the influential factors on the magnetic separation. For blast furnace slag, the recovery of iron was observed to increase as drum speed and feeding rate were lowered. For water-cooled converter slag, iron recovery was raised as feeding rate was increased and drum speed was lowered. Also, finer slag particles were observed to be more favorable for the higher recovery of iron content. Regarding air-cooled converter slags, higher iron recovery was accomplished when both feeding rate and drum speed were increased or decreased. In addition, when the magnetic field strength was increased the iron recovery was raised, however, the iron grade of separated product was observed to diminish because of the co-separation of impurities.

• Korean Journal of Materials Research
• /
• v.7 no.4
• /
• pp.339-346
• /
• 1997

회전 불밀에 있어서 볼의 운동을 비선형 spring과 비선형 deshpot로 구성된 Kelvin모델을 사용한 DEM(Distinct Element Method;개별요소법)에 의하여 2차원으로 해석하였다. 모델에 있어서 점성계수는 볼과 밀벽사이의 반발실험 데이타로 부터 결정하였다. 각볼의 동적인 운동은 비선형 점탄성과 Newton의 운동법칙를 기초로하여 모사되었다. 밀이 회전하는 동안 볼의 궤적과 동적인 운동은 실제 실험에 의한 밀내에서의 볼의 운동고 잘 일치하였다. 본 연구에서 제안된 모델 시뮬레이션은 회전 볼밀내의 실제의 3차원인 볼의 운동에 대한 해석에 중요한 단서가 될 수 있었다. 볼의 운동고 운동에너지는 회전 볼밀의 속도와 볼의 충진율에 의해 크게 영향을 받았다.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.126-129
• /
• 2008

In this study the aerodynamic characteristics of a canard-controlled missile with freely spinning tailfins were investigated by using a CFD code. The aerodynamic coefficients and roll-rate of freely spinning tailfins were calculated by an analysis of 6-DOF and the Euler code. Results were in good agreement with experimental data, and the roll-rates of freely spinning tailfins were also in good agreement with the experimental data for the roll and yaw canard control inputs. This indicates that the CFD Euler code can be applied to predict the canard-controlled missile with freely spinning tailfins.

• 전기의세계
• /
• v.46 no.8
• /
• pp.34-40
• /
• 1997

케이블 시스템의 사고는 예방 진단에 근거한 정확한 진단으로 피할 수 있으며, 잔여수명 예측 기술은 진단 방법의 체계적인 적용에 의해 향상될 수 있다. 따라서 본 고에서는 케이블 시스템 진단 방법의 체계적인 개발을 위해서 60 kV급 이상의 종이 절연 혹은 고분자 절연 전력 케이블과 그 접속 자재에 대해서만 진단 방법을 개략적으로 소개만하고 있으며 수트리에 관련된 열화, 절연체의 열화를 제외한 모든 열화현상과 DC 케이블에 대해서는 언급을 하지 않았다. 회전기 고체절연체의 열화에 의해 야기되는 변화는 회전기 진동을 발생 시키고, 진동은 기계에 심각한 손상을 발생시킨다. 회전기의 절연열화 진단은 유전손실, 유전율, 음향 등의 측정/분석으로 가능하고 적용 방법은 on-line/off-line으로 가능하다. 절연 시스템의 열화정도 판정은 회전기의 적절한 보수시기의 판단을 가능하게 하여 유지 보수비의 절감 및 회전기의 수명연장을 가능하게 할 것이다.

• Journal of Urban Science
• /
• v.6 no.2
• /
• pp.29-34
• /
• 2017

Although the supply of public parking lots in major cities is steadily increasing, there is still a shortage of parking spaces that take into account the characteristics of actual available parking spaces. These parking problems are caused by conflicts between users, illegal occupation and privatization of roads, interference with traffic roads, and business stagnation in commercial areas and illegal parking problems. In addition, despite various parking demand management policies and continuous supply of public parking facilities, the solution to the parking problem is uneasy due to increased construction costs and changes in social conditions. In order to solve this problem, it was judged that it would be necessary to utilize the existing public parking lots efficiently. Therefore, we collect the variables expected to affect the turnover, and use multiple regression models. The results are summarized as follows. Firstly, public parking lots can be classified into four types using utilization rate and turnover rate. Secondly, influencing factors are found including index of public transportation usage convenience, index of illegal parking, and land use characteristics in central commercial district. Thirdly, it was shown that there was little impact by the size of public parking lots, separation distance to subway distance, separation distance to bus stops, transfer zone, residential zone, and second-rated lots by parking costs. Finally, it is found that public parking lots can be improved by proving accessibility of public transit, enforcement of illegal parking, active approaches supporting public parking lots. It is also recommended that public parking cost rating system based mainly on land use characteristics should be remedied and rearranged.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.159-164
• /
• 1988

The directions of the principal strain increment, stress, and stress increment during rotation of the principal stress axes at any stress level was studied for $K_0$-consolidated clay using torsion shear apparatus with individual control of the vertical stress, the confining pressure, and the shear stress on hollow cylinder specimens under undrained and drained condition. The torsion shear tests were performed according to predetermined stress-paths, which were chosen to cover over the full range of rotation of principal stress axes. The test results indicated that the strain increment vectors at failure coincided with the stress vectors. That is, the direction of strain increment coincided with the direction of stress increment at small stress levels and with the direction of stress at higher stress levels, which indicated that the behavior of clay was transfered from elastic to plastic as the stress level was increased. The applicability of the elastoplastic theory for modeling of the behavior of clay during rotation of the principal stress axes was given.