• Journal of Legislation Research
• /
• no.44
• /
• pp.241-281
• /
• 2013

First and foremost, a discussion concerning government structure has to be done in connection with the state form and the governmental form. For practical reasons, there is a need to balance the principle of legality and its exceptions under the Government Organization Act. To ensure the flexibility of government structure with respect to the principle of legality, the National Assembly should accept the government structure requested by the newly elected government. This mitigates the rigidity of the principle of the legality within the government organizations. However, excessive changes by each government could violate the principle of legality asked by Constitution. In this sense, arbitrary modification with respect to the government structure by the newly elected government is not desirable. The long term stability of the government organization is required in any case. Secondly, general administrative agencies, other than Executive Ministries, should not be established under the direct order of the President without the control of the Prime Minister. A hierarchy of the executive branch (President->Prime Minister-> Executive Ministries) is stipulated in the Constitution. Establishing a hierarchy of President -> executive institution should be considered unconstitutional. Therefore, only the Presidential Secretariat and institutions with special functions can be established in the Presidential Office. Establishing general administrative agencies in the Presidential Office for convenience purposes is against the spirit of the current Constitution. Consequently, only the office of staffs and special agencies can be placed in the presidential office. It is against the spirit of the current Constitution to found administrative agencies under the presidential office for convenience. Thirdly, the office of the Prime Minister should be the backbone of internal affairs. In that sense, the President, as the head of state, should focus on the big picture such as the direction of the State, while the Cabinet headed by the Prime Minister should be responsible for the daily affairs of the State. The cabinet surrounding the Prime Minister must control all the ordinary affairs of the State, while the President, as the head of the State, should focus on the big picture of blueprinting the aim of the State. Lastly, the Office of the Prime Minister and Executive Ministries are the two main bodies of the executive branch. It is important to reduce the confusion caused by repeated changes in the names of Executive Ministries, to restore the traditional names and authorities of these institutions, and to rehabilitate the legitimacy of the State. For the Korean democracy to take its roots, a systematic way of stabilizing a law-governed democratic country is needed. There is also the need not only to reform security and economic agencies, but also to rationally solve the integration of technique and policy, according to the changes of time.

• 한국노년학
• /
• v.37 no.1
• /
• pp.173-200
• /
• 2017

This study is designed to verify the actual effect on the prevention of the elderly suicide of the integrated crisis intervention service which has been widely provided across all local communities in Gyeonggi-province focusing on the integrated crisis intervention model developed for the prevention of elderly suicide. The integrated crisis intervention model for the local communities and its manual were developed for the prevention of elderly suicide by integrating the crisis intervention theory which contains local community's integrated system approach and the stress vulnerability theory. For the analysis of the effect, the geriatric depression and suicidal ideation scale was adopted and the data was collected as follows; The data was collected from 258 people in the first preliminary test. Then, it was collected from the secondary test of 184 people after the integrated crisis intervention service was performed for 6 months. The third collection of data was made from 124 people after 2 or 3 years later using the backward tracing method. As for the analysis, the researcher used the R Statistics computing to conduct the test equating, and the vertical scaling between measuring points. Then, the researcher conducted descriptive statistics analysis and univariate analysis of variance, and performed multi-level modeling analysis using Bayesian estimation. As a result of the study, it was found out that the integrated crisis intervention model which has been developed for the elderly suicide prevention has a statistically significant effect on the reduction of elderly suicide in terms of elderly depression and suicide ideation in the follow-up measurement after the implementation of crisis intervention rather than in the first preliminary scores. The integrated crisis intervention model for the prevention of elderly suicide was found to be effective to the extent of 0.56 for the reduction of depression and 0.39 for the reduction of suicidal ideation. However, it was found out in the backward tracing test conducted 2-3 years after the first crisis intervention that the improved values returned to its original state, thus showing that the effect of the intervention is not maintained for long. Multilevel analysis was conducted to find out the factors such as the service type(professional counseling, medication, peer counseling), characteristics of the client (sex, age), the characteristics of the counselor(age, career, major) and the interaction between the characteristics of the counselor and intervention which affect depression and suicidal ideation. It was found that only medication can significantly reduce suicidal ideation and that if the counselor's major is counseling, it significantly further reduces suicidal ideation by interacting with professional counseling. Furthermore, as the characteristics of the suicide prevention experts are found to regulate the intervention effect on elderly suicide prevention in applying integrated crisis intervention model, the primary consideration should be given to the counseling ability of these experts.

• Maritime Security
• /
• v.1 no.1
• /
• pp.215-240
• /
• 2020

In 2017, the U.S. DARPA coined 'mosaic warfare' as a new way of warfighting. According to the Timothy Grayson, director of DARPA's Strategic Technologies Office, mosaic warfare is a "system of system" approach to warfghting designed around compatible "tiles" of capabilities, rather than uniquely shaped "puzzle pieces" that must be fitted into a specific slot in a battle plan in order for it to work. Prior to cover mosaic warfare theory and recent development, it deals analyze its background and several premises for better understanding. The U.S. DoD officials might acknowledge the current its forces vulnerability to the China's A2/AD assets. Furthermore, the U.S. seeks to complete military superiority even in other nation's territorial domains including sea and air. Given its rapid combat restoration capability and less manpower casualty, the U.S. would be able to ready to endure war of attrition that requires massive resources. The core concept of mosaic warfare is a "decision centric warfare". To embody this idea, it create adaptability for U.S. forces and complexity or uncertainty for the enemy through the rapid composition and recomposition of a more disag g reg ated U.S. military force using human command and machine control. This allows providing more options to friendly forces and collapse adversary's OODA loop eventually. Adaptable kill web, composable force packages, A.I., and context-centric C3 architecture are crucial elements to implement and carry out mosaic warfare. Recently, CSBA showed an compelling assessment of mosaic warfare simulation. In this wargame, there was a significant differences between traditional and mosaic teams. Mosaic team was able to mount more simultaneous actions, creating additional complexity to adversaries and overwhelming their decision-making with less friendly force's human casualty. It increase the speed of the U.S. force's decision-making, enabling commanders to better employ tempo. Consequently, this article finds out and suggests implications for Korea armed forces. First of all, it needs to examine and develop 'mosaic warfare' in terms of our security circumstance. In response to future warfare, reviewing overall force structure and architecture is required which is able to compose force element regardless domain. In regards to insufficient defense resources and budget, "choice" and "concentration" are also essential. It needs to have eyes on the neighboring countries' development of future war concept carefully.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.254-261
• /
• 2020

Purpose: The purpose of this study was to assess the marginal and internal fit of interim crowns fabricated by two different manufacturing method (subtractive manufacturing technology and additive manufacturing technology). Materials and Methods: Forty study models were fabricated with plasters by making an impression of a master model of the maxillary right first molar for ceramic crown. On each study model, interim crowns (n = 40) were fabricated using three types of 3D printers (Meg-printer 2; Megagen, Zenith U; Dentis, and Zenith D; Dentis) and one type milling machine (imes-icore 450i; imes-icore GmbH). The internal of the interim crowns were filled with silicon and fitted to the study model. Internal scan data was obtained using an intraoral scanner. The fit of interim crowns were evaluated in the margin, absolute margin, axial, cusp, and occlusal area by using the superimposition of 3D scan data (Geomagic control X; 3D Systems). The Kruskal-wallis test, Mann-Whitney U test and Bonferroni correction method were used to compare the results among groups (α = 0.05). Results: There was no significant difference in the absolute marginal discrepancy of the temporary crown manufactured by three 3D printers and one milling machine (P = 0.812). There was a significant difference between the milling machine and the 3D printer in the axial and occlusal area (P < 0.001). The temporary crown with the milling machine showed smaller axial gap and higher occlusal gap than 3D printer. Conclusion: Since the marginal fit of the temporary crown produced by three types of 3D printers were all with in clinically acceptable range (< 120 ㎛), it can be sufficiently used for the fabrication of the temporary crown.

• Korean Journal of Environment and Ecology
• /
• v.35 no.1
• /
• pp.81-91
• /
• 2021

The Democratic People's Republic of Korea did not have direct legislation on natural environmental conservation until the early 1970s when the regime was still in the early stage. The Law on Land was enacted in 1977 to provide the legal basis for protecting the natural environment, including land protection, protection zones, and forest formation and protection. The enactment of the Law on Environmental Protection in 1986 made progress on environmental conservation in the DPRK. The constitutional amendment in 1992 stipulated "the preservation and creation of the natural environment as the responsibility of the state." Based on the Framework Law on Environmental Protection, subordinate statutes in various fields were enacted after the1990s. While the committee designated and managed the protected zones in the early days, the Framework Law on Environmental Protection established the ground for the designation of legally protected areas, and the Law on Protection of Scenic Spots and Natural Monuments enacted in 1995, and the Law on Environmental Protection enacted in 2009 provided the details. Furthermore, the types of nature reserves include biosphere reserves, primeval forest reserves, animal reserves, plant reserves, and scenic reserves. The 2nd National Biodiversity Strategy and Action Plan established in 2007 based on the Convention on Biological Diversity(CBD) stated 326 protected zones in the DPRK. However, the 2018 United Nations list of Protected Areas shows only 31 registered zones, indicating the need to establish basic information on protected areas in DPRK. This study can provide basic information for a better understanding of the nature conservation system in the DPRK. Considering that environmental protection activities such as protection of endangered species and recovery of environmental pollution are subject to exceptions under the current sanctions against North Korea (UN Security Council, the United States), it will be possible to contribute to identifying possible inter-Korean cooperation projects in the field of the natural environment.

• Composites Research
• /
• v.34 no.3
• /
• pp.192-198
• /
• 2021

Due to enormous market growing of electric vehicles without combustion engine, reducing unwanted BSR (buzz, squeak, and rattle) noise is highly demanded for vehicle quality and performance. Particularly, innerbelt weatherstrips which not only block wind noise, rain, and dust from outside, but also reduce noise and vibration of door glass and vehicle are required to exhibit high damping properties for improved BSR performance of the vehicle. Thermoplastic elastomers (TPEs), which can be recycled and have lighter weight than thermoset elastomers, are receiving much attention for weatherstrip material, but TPEs exhibit low material damping and compression set causing frictional noise and vibration between the door glass and the weatherstrip. In this study, high damping EPDM (ethylene-propylene-diene monomer)/PP (polypropylene) thermoplastic vulcanizates (TPV) were investigated by varying EPDM/PP ratio and ENB (ethylidene norbornene) fraction in EPDM. Viscoelastic properties of TPV materials were characterized by assuming that the material damping is directly related to the viscoelasticity. The optimum material damping factor (tanδ peak 0.611) was achieved with low PP ratio (14 wt%) and high ENB fraction (8.9 wt%), which was increased by 140% compared to the reference (tanδ 0.254). The improved damping is believed due to high fraction of flexible EPDM chains and higher interfacial slippage area of EPDM particles generated by increasing ENB fraction in EPDM. The stick-slip test was conducted to characterize frictional noise and vibration of the TPV weatherstrip. With improved TPV material damping, the acceleration peak of frictional vibration decreased by about 57.9%. This finding can not only improve BSR performance of electric vehicles by designing material damping of weatherstrips but also contribute to various structural applications such as urban air mobility or aircrafts, which require lightweight and high damping properties.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.353-365
• /
• 2023

The effects of climate change on green infrastructure and environmental media remain uncertain and context-specific despite numerous climate projections globally. In this study, the extreme weather conditions in seven major cities in South Korea were characterized through statistical analysis of 20-year daily meteorological data extracted fro m the Korea Meteorological Administration (KMA). Additionally, the impacts of extreme weather on Nature-based Solutions (NbS) were determined through a comprehensive review. The results of the statistical analysis and comprehensive review revealed the studied cities are potentially vulnerable to varying extreme weather conditions, depending on geographic location, surface imperviousness, and local weather patterns. Temperature extremes were seen as potential threats to the resilience of NbS in Seoul, as both the highest maximum and lowest minimum temperatures were observed in the mentioned city. Moreover, extreme values for precipitation and maximum wind speed were observed in cities from the southern part of South Korea, particularly Busan, Ulsan, and Jeju. It was also found that extremely low temperatures induce the most impact on the resilience of NbS and environmental media. Extremely cold conditions were identified to reduce the pollutant removal efficiency of biochar, sand, gravel, and woodchip, as well as the nutrient uptake capabilities of constructed wetlands (CWs). In response to the negative impacts of extreme weather on the effectiveness of NbS, several adaptation strategies, such as the addition of shading and insulation systems, were also identified in this study. The results of this study are seen as beneficial to improving the resilience of NbS in South Korea and other locations with similar climate characteristics.

• Korean Journal of Ichthyology
• /
• v.35 no.4
• /
• pp.263-269
• /
• 2023

This study aims to contribute to the research on resource recovery for the rapidly declining population of Liparis tanakae by observing the larval development process and the morphology of juveniles based on their growth. Natural spawning eggs collected in Yeosu were used for observing the process of egg development and larval morphology. The water temperature during the rearing process was maintained at 12.3~13.5℃ (average 12.7℃). The fertilized eggs had an egg diameter ranging from 1.57 to 1.79 mm (average 1.71 mm) and were spherical and adhesive. Within 4 hours 35 minutes after fertilization, they reached the two-cell stage, and after 74 hours 10 minutes, the formation of the yolk sac began. At 106 hours post-fertilization, a caudal fin appeared at the tail tip. Hatching began at 526 hours, and the larvae developed with the yolk sac positioned just behind the eyes. The newly hatched larvae had both the mouth and anus open. Melanophores appeared inside the lower jaw and around the tail on the third day after hatching. By the 16th day after hatching, most of the yolk was absorbed, and melanophores were visible in the head region. Finally, on the 63rd day after hatching, the head region significantly developed, and the body shape and mouth were similar to those of an adult fish, signifying the transition to the juvenile stage. This study will serve as valuable data for aquaculture techniques related to the conservation and restoration of fish species based on the hatching and juvenile morphology of Liparis tanakae.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.45-78
• /
• 1974

To provide useful information for developing new high yielding soybean varieties and for improving cultural practices, an investigation was made on variation of dry matter production and on relationship among several agronomic characters of soybean plants grown under different planting times and densities as well as under different fertilizer levels, using Kwang-kyo, Dong puk-tae, and Suke ＃ 51 as determinate types and Shelby, SRF-300 and Harosoy as indeterminate types at the Crop Experiment Station during the period of 1972 and 1973. The results obtained were summarized as follow: 1. The dry weight, CGR and LAI at the initial flowering stage were high in the high plant population irrespective of varieties, planting times, and fertilizer levels. However, those characters of the indeterminate type were lower than those of the determinate types. The same characters of the indererminate type at the terminal leaf stage were either same or higher than those of the determinate types. 2. The dry weight of the determinate type at the initial flowering stage was similar to the indeterminate, type, when planting times were May 21 or June 15. The dry weights of both types of varieties were low when planted on July 10. When fertilizer levels were increased, the CGR, dry weight and LAI at the initial flowering stages were also increased. 3. Even though significant differences of LAI were obtained among the varieties within the same plant type, the indeterminate type was in general lower than that of the determinate type regardless of planting time and densities, or fertilizer levels, while the yield of the indeterminate type was comparable to the yield of the determinate type. 4. The high degree of leaf- and petiole-fall at the greenbean stage was highly associated with early planting and high levels of fertilizers. However, less amount of leaf- or petiole-fall was found when planted on July 10 or under low plant population. 5. The percent of stem weight was high under higher plant population, while the percent of leaf weight was high under lower plant population. When planting time was late, the percent of stem and petiole weight were reduced, while the leaf weight was increased. 6. The percent of pod weight of the determinate type at the terminal leaf stage was about 2% when planted on May 21, about 8% when planted on June 15, and about 9% when planted on July 10. The percent of pod weight of the indeterminate type at the terminal leaf stage were about 6 % when planted on May 21, 14% when planted on June 15 and 21% when planted on July 10. 7. Kwang kyo showed less degree of leaf-fall even when lodged due to high levels of fertilizer applied, while SRF-300 showed great damage due to lodging. 8. High yields were obtained when planted on May 21, but there were little yield differences between yields from May 21 and June 15 plantings. The reduction of yield due to late planting of July 10 was less apparent in the determinate type of varieties, while it was high in the indeterminate type. 9. The optimum plant population per are for high yield was 1, 250 to 2, 500 plants when planted on May 21, 2, 500 plants when planted on June 15, and 3, 333 plants when planted on July 10. 10. High correlation coefficients were obtained between dry matter weight and LAI at the terminal leaf stages, and between the dry matter weight and yield at the greenbean stages. The optimum dry weight for high yield in the determinate type was expected to be 25 kg. per are at the initial flowering stage and 50 kg. per are at the terminal leaf stage. In the indeterminate type the LAI and dry weight at the greenbean stage were 4 to 5 and 80 kg. per are, respectively. 11. Under the high plant population plant height was increased, while the stem diameter and the number of nodes and branches were reduced. Consequently, the percent of mainstem to main stem plus branches were increased, and the length of internode was also elongated. The ratios of stem weight, number of nodes and pods, and yield of main stem were increased when high plant population was associated with the early planting. The percent of main stem to branches for the indeterminate type was higher than that of the determinate type. 12. Under the high plant densities and late planting, the percent of the pod number and yields of main stem were increased, indicating that varieties with no or less branches were better adaptable under such conditions. 13. High degree of simple correlation coefficients was obtained between the LAI at the initial flowering stage and terminal leaf stage, and the total node number, dry matter and dry stem weight of both determinate and indeterminate types. Even though no significant correlation was found between the LAI at the initial flowering stage of the determinate type and the stem length and pod number per are, highly significant correlation coefficients were obtained between such characters in the indeterminate type of varieties. 14. The dry matter was positively correlated with the LAI, CGR, stem length, and pod number, node number and dry stem weight per are, while no significant correlation was found between the dry matter and stem diameter. 15. The correlation coefficients between lodging index and the LAI, dry weight, stem length and dry stem weight were highly significant. Negative correlation was obtained for the indeterminate type between the stem diameter and lodging index. The correlation coefficient between the stem diameter and lodging index was non-significant for the determinate type, while positive correlation was obtained between the yield and lodging index in the determinate type. The lodging index was also positively correlated with average length of internode of main stem. 16. The 100 seed weight appeared to be lowered under the high plant population and no fertilizer condition, and when planted late. Apparent differences of 100 seed weight were found between main stem and branches, being higher for the main stem than for the branches. 17. No variation of protein content was found due to different cultural practices. However, the oil content was apparently reduced when planted late.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.49-61
• /
• 2014

Purpose: With the aging of the population, the attack rate of osteoporotic vertebral compression fracture is in the increasing trend, and percutaneous vertebroplasty (PVP) is the most commonly performed standardized treatment. Although there is a research report of the excellence of usefulness of the SPECT/CT examination in terns of the exact diagnosis before and after the procedure, the bone cement material used in the procedure influences the image quality by forming an artifact in the CT image. Therefore, the objective of the research lies on evaluating the effect the bone cement gives to a SPECT/CT image. Materials and Methods: The images were acquired by inserting a model cement to each cylinder, after setting the background (3.6 kBq/mL), hot cylinder (29.6 kBq/mL) and cold cylinder (water) to the NEMA-1994 phantom. It was reconstructed with Astonish (Iterative: 4 Subset: 16), and non attenuation correction (NAC), attenuation correction (AC+SC-) and attenuation and scatter correction (AC+SC+) were used for the CT correction method. The mean count by each correction method and the count change ratio by the existence of the cement material were compared and the contrast recovery coefficient (CRC) was obtained. Additionally, the bone/soft tissue ratio (B/S ratio) was obtained after measuring the mean count of the 4 places including the soft tissue(spine erector muscle) after dividing the vertebral body into fracture region, normal region and cement by selecting the 20 patients those have performed PVP from the 107 patients diagnosed of compression fracture. Results: The mean count by the existence of a cement material showed the rate of increase of 12.4%, 6.5%, 1.5% at the hot cylinder of the phantom by NAC, AC+SC- and AC+SC+ when cement existed, 75.2%, 85.4%, 102.9% at the cold cylinder, 13.6%, 18.2%, 9.1% at the background, 33.1%, 41.4%, 63.5% at the fracture region of the clinical image, 53.1%, 61.6%, 67.7% at the normal region and 10.0%, 4.7%, 3.6% at the soft tissue. Meanwhile, a relative count reduction could be verified at the cement adjacent part at the inside of the cylinder, and the phantom image on the lesion and the count increase ratio of the clinical image showed a contrary phase. CRC implying the contrast ratio and B/S ratio was improved in the order of NAC, AC+SC-, AC+SC+, and was constant without a big change in the cold cylinder of the phantom. AC+SC- for the quantitative count, and AC+SC+ for the contrast ratio was analyzed to be the highest. Conclusion: It is considered to be useful in a clinical diagnosis if the application of AC+SC+ that improves the contrast ratio is combined, as it increases the noise count of the soft tissue and the scatter region as well along with the effect of the bone cement in contrast to the fact that the use of AC+SC- in the spine SPECT/CT examination of a PVP performed patient drastically increases the image count and enables a high density of image of the lesion(fracture).