• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.900-907
• /
• 2013

Payload fairing(PLF) protects satellites and related equipment from the external environment. They are separated before the satellite separation. Payload fairing made of composite sandwich materials due to their considerable bending stiffness and strength-to-weight ratio. Payload fairing have compression, shear and bending load during the flight. In this study, To check the strength of PLF and connected part, structural test of PLF accomplished using an actuator and a fixture. Purpose of structural test is to verify the strength of PLF in force of separation spring and combination structural load applied. Test result shows that the PLF have an acceptable margin of safety for the combination structural load and force of separation spring.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.182-188
• /
• 2001

This paper presents the vibration characteristics of a rectangular plate with $45^{\circ}$ oblique crack subjected to a uniaxial tension. The experiment is adopted by the time-average Electronic Speckle Pattern Interferometry(ESPI) method. The natural frequency and mode shape are considered accurately according to the increase of tensile load. When tensile load is zero, the vibration modes we agreed with the smooth and the $45^{\circ}$ obliquely cracked plate. But according to the increasement of load it is shown that vibration modes are extremely varied. The effects of the crack under the vibration are discussed in detail. It is indicated that the increase of load makes the variation of the frequencies and modes complicate in the range of even a small load. The results are agreed with the FEM analysis within 5%.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.89-98
• /
• 2017

The offshore plant structure has been transported to the site by barge because it is hard to manufacture in site. When the structure was transported on the sea, offshore plant structures and connection were experienced repetitive submarine load. For this reason, it was known for that the axial force of high-strength bolted connection was declined. Therefore, in this study, high-strength bolted connection was evaluated the shear fatigue performance under longtime fatigue load during marine transport. The experimental variables were selected intial axial force, surface type, and bolt type because they ar important factors in the change of axial force of bolts. As a experimental results of considering various variables, the variation of axial force showed within 1%. Therefore, the high-strength bolted connection was verified structural safety under longtime fatigue load.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.255-261
• /
• 2005

Immense quantities of coal combustion by-products are produced every year, and only a small fraction of them are currently utilized. The purpose of this study is to investigate reused techniques of coal ash in the construction field, which may contribute to the savings of building materials and conservation of environment. From the results of the compressive strength test, the elastic modulus was experimentally proposed. Also, based on the three- point-bending test, the fracture parameters - notch sensitivity, fracture energy, and initial compliance were experimentally proposed. As a result, the strength and fracture characteristics were lower than those of concrete or mortar. Also, the study showed that the deflection at a fracture decreased as the age increased and as the notch depth rate decreased. However, it was judged that its use as a building material could be expected if further research is carried out.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.1
• /
• pp.15-23
• /
• 2006

During earthquake, force components acting on quay walls consist of inertia force, earth pressure and water pressure. The earth pressure is largely influenced by the backfill condition such as soil density and the installation of gravel backfill. Therefore, shaking table tests were performed by using four different model sections, which were designed by varying the soil density and the backfill materials. The magnitude and the phase of force components acting on quay wall were analyzed. Test results showed that the gravel backfill and the soil compaction were effective to reduce the excess pore pressure in backfill and the magnitude and phase of backfill thrust were much influenced by the excess pore pressure in backfill. When the input acceleration was 0.10g, the average ratios of the inertia force, the front dynamic water force and the thrust to the total force were $64\%,\;21\%\;and\;16\%$, respectively. As the excess pore pressure increased, the ratio of the thrust to the total force increased.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2C
• /
• pp.41-49
• /
• 2009

Due to the increased size of civil infrastructure and the cost of materials, the needs exists for utilizing large sized cast-inplace piles in lieu of conventional precast piles. Among them, the barrette pile has become more commonly used in fields where a diaphragm wall is the retaining wall, to improve workability and economical efficiency, and to ensure hole stability under deep soil layers. In this paper, the bearing capacity and displacement characteristics of the barrette pile are evaluated by using the bi-directional loading test data obtained from four different sites. In addition, the design value of pile shaft resistance, ${\beta}$, is assessed with previous literatures and load transfer analysis. Finally, numerical analyses were performed to analyze the load-displacement behavior, and the interface effect on the piles, using the 3-dimensional finite element method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.71-74
• /
• 1998

HMM (hidden Markov model)을 이용한 음성인식은 현재 가장 널리 쓰여지고 있는 방법으로, 이 중 CDHMM (continuous observation density HMM)은 상태에서 관측심볼확률을 연속확률밀도를 사용하여 표현한다. 본 논문에서는 가우스 혼합밀도함수를 사용하는 CDHMM의 상태천이확률과, 관측심볼확률을 표현하기 위한 인자인 평균벡터, 공분산 행렬, 가지하중값을 유전자 알고리듬을 사용하여 최적화하는 방법을 제안하였다. 유전자 알고리듬은 매개변수 최적화문제에 대하여 자연의 진화원리를 모방한 알고리듬으로, 염색체 형태로 표현된 개체군 (population) 중에서 환경에 대한 적합도 (fitness)가 높은 개체가 높은 확률로 살아남아 재생 (reproduction)하게 되며, 교배 (crossover)와 돌연변이 (mutation) 연산 후에 다음 세대 개체군을 형성하게 되고, 이러한 과정을 반복하면서 최적의 개체를 구하게 된다. 본 논문에서는 상태천이확률, 평균벡터, 공분산행렬, 가지하중값을 부동소수점수 (floating point number)의 유전자형으로 표현하여 유전자 알고리듬을 수행하였다. 유전자 알고리듬은 복잡한 탐색공간에서 최적의 해를 찾는데 효과적으로 적용되었다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2107-2108
• /
• 2006

본 논문에서는 범용 공학 소프트웨어인 셈툴과 연계한 FEM 패키지의 3D Visualization 및 Operation에 대해 기술 한다. FEM 해석을 위한 Graphical Interface로서 각종 오브젝트의 생성, 로드와 더불어 해당 오브젝트를 3D Visualization하여 각종 Manipulation을 하는 기법에 대해 서술하도록 한다. 특히, 해석에 필요한 경계 조건이나 하중을 부여하기 위해 노드를 Picking 하는 기법과, 해석 후 객체의 내부 하중 상태 등에 대한 컨투어링을 위해 객체를 분할하는 Cut Section 등에 대해서도 다루도록 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.594-597
• /
• 2014

본 논문에서는 국제 태양광 자동차 대회를 참가하는 태양광 자동차 프론트 너클의 경량화 설계에 관한 연구를 진행한다. 이를 위해 Cattle grid 를 포함한 실제 주행환경과 태양광 자동차를 동역학 시뮬레이션 모델로 구성하고 대회에서 차량의 평균속도인 70Km/h 로 주행 시, 서스펜션에서 발생되는 동하중을 측정하였다. 프론트 너클을 유한요소로 구성하고 다물체 동역학 시뮬레이션에서 도출된 하중들로 위상최적기법을 통해 프론트 너클의 경량화를 이루었다. 마지막으로 피로해석을 수행하여 그 타당성을 검증하였다.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.169-176
• /
• 2009

2008년 1월과 12월의 경기도 이천시에서의 창고화재는 재산상의 피해보다도 방재대책이 허술함과 인명피해에 대하여 사회적인 문제가 제기되었으나 건축자재, 입고 화물이외에 화재하중 등을 가중시키는 플라스틱 파렛트에 대한 거론은 없었다. 그러나 일본의 소방청 소방연구소에서는 1995년의 자동화창고의 전소화재시 화재조사를 실시한 후 방재대책으로서 플라스틱 파렛트의 화재하중 경감, 발연량 및 유해가스감축을 위한 후속대책으로 난연 파렛트에 대한 연구를 수행하였다. 그 결과 수산화마그네슘 또는 적린과 수산화마그네슘을 난연제로 사용한 플라스틱 파렛트 난연화에 성공하였다. 본고에서는 시험시설 등의 연구환경의 한계로 일본의 연구사례를 조사하고 우리나라의 난연 플라스틱 파렛트 도입방안에 대해 살펴보기로 한다.