• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.455-456
• /
• 2008

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.596-598
• /
• 2009

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.385-392
• /
• 2021

In this study, impact of Co proportion and calcination temperature of ceria on the Co/CeO₂ was analyzed by comparing nitrogen monoxide oxidation performance of various catalysts and their physico-chemical properties. The structural properties of each catalyst were studied by XRD and BET analysis, and the surface crystal states of cobalt were proposed according to the surface density. Oxidation states of elements were observed through Raman and XPS analysis, and the relationship between typical oxidation states and nitrogen monoxide oxidation performance was designed. Through H₂-TPR, oxygen-transferring capacity due to changes in the characteristics of catalysts were identified, and activation sites (Co³⁺) for oxidation were suggested.

• Environmental engineer
• /
• s.156
• /
• pp.12-19
• /
• 1999

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.4
• /
• pp.444-451
• /
• 2007

Catalytic oxidation characteristics of benzene as a VOC was investigated using a fixed bed reactor system over transition $metals/\gamma-Al_2O_3$ catalysts. As transition metals, eight metals including copper, nickel, manganese, iron etc. were adopted. The parametric tests were conducted at the reaction temperature range of $200\sim500^{\circ}C$, benzene concentration of $1,000\sim3,000$ ppm, and space velocity range of $5,000\sim60,000\;hr^{-l}$. The property analyses such as BET, SEM, XRD and the conversions of catalytic oxidation of VOC were examined. The experimental results showed that the conversion was increased with decreasing VOC concentration and space velocity. It was also found that $Cu/\gamma-Al_2O_3$ catalyst calcinated at $500^{\circ}C$ showed the highest activity for the oxidation of benzene and 15% metal loading was the optimum impregnation level.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.928-935
• /
• 2010

A bag filter system was partially burnt down during a trial run of waste wood incineration boiler. This brought about unburned hydrocarbon which caused a rapid deactivation of low temperature SCR catalyst set up in two stage after the bag filter. The deactivated catalyst was investigated in order to trace the origin by several characterization methods such as XRD, EDX, BET, TGA, SEM. The deactivated catalyst was regenerated by different methods such as acid washing, water washing in ultrasonication, and calcination treatment under air condition. It is found the calcination treatment under air condition at $450^{\circ}C$ for 2 hours to be the best regeneration method. The catalytic activity was measured in the form of 2 cm ${\times}$ 2 cm ${\times}$ 10 cm (catalyst weight 10 g) honeycomb type. A deNOx efficiency of the regenerated catalyst showed 100% at $180^{\circ}C$ which is the same level of fresh one.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.911-919
• /
• 1998

부탄테트라카르복실 산을 이용한 면직물의 DP 가공에서 가장 효과적인 촉매로 알려진 sodium hypophosphite(SHP)를 대체하기 위하여 carbodiimide 촉매의 효과를 알아보았다. Carbo야-imide 촉매로는 cyanamide(CY), dicyandiamide(DCY)와 disodium cyanamide(DSC)를 사용하였다. DCY와 DSC가 일반적으로 CY보다 좋은 방추도와 방축도 등을 보였고 또한 독성이 낮고 저장시 안정도 등이 우수하므로 산업적인 응용이 가능하다. 필요한 방추도와 물리적성질의 균형을 위해서 가공욕의 pH 조절이 가장 중요한 인자로 나타났다. 촉매존재시에 면과 부탄테트라카르복실산의 에스터화 가교 반응 메커니즘을 제아하였다. 또한 황화 염료로 염색된 염색포에 대한 가공 효과 분석시 carbodiimide 촉매가 SHP 보다 대체로 작은 색상 변화를 유발시켰다. 이러한 연구 결과는 부양화와 여러 염료의 색상 변화를 유발시키는 SHP를 사용하지 않고 부탄테트라카르복실 산과 carbodiimide 촉매를 이용한 무포름알데히드, 무인 가공제의 면직물 DP 가공의 가능성을 보여 주고 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.477-477
• /
• 2012

미생물 연료전지는 정부가 추진하고 있는 신성장 동력사업의 녹색성장 정책에 부합하는 환경융합 신기술로써 일상생활에서 배출되는 하 폐수와 같은 유기물질을 전자공여체로 이용하여 전기에너지를 생산 할 수 있다는 점에서 각광받고 있다. 미생물 연료전지는 산화전극부의 미생물이 공급된 유기물질 을 분해하여 전자와 수소이온을 생성시키며 이들은 산소가 존재하는 환원전극부로 이동하여 물로 환원 됨 으로써 전기를 생성한다. 전기 화학적 성능의 향상을 위해 미생물 연료전지에서는 환원전극부에 서의 산소와 전자 및 수소이온의 빠른 환원반응을 유도해 주는 Pt촉매를 이용한다. 하지만 고가의 Pt 촉매는 미생물 연료전지의 현장적용을 위한 규모확장 시 초기비용이 증가되는 문제점을 초래한다. 이에 미생물 연료전지의 대체촉매 개발에 대한 많은 연구가 진행되고 있다. 화학적 연료전지에 관한 논문에서 연료전지의 촉매로 산소 환원반응에 높은 성능을 보이는 Co-N/C 형태의 Cobalt poly-pyrrole carbon가 제시 되었다. 이는 가격적인 측면에서는 Pt촉매의 약1/10배 정도 수준이지만 셀 성능은 Pt촉매의 95%정도의 효율을 보인다는 측면에서 향후 Pt 대체촉매로 가능성을 보여주는 새로운 비금속 촉매물질이다. Cobalt poly-pyrrole carbon이 Pt-catalsyt 셀 전압 성능 대비 약 66 %의 효율을 보였고 내부저항과 최대전력 밀도에 있어서도 촉매를 사용하지 않은 경우와 비금속 촉매의 성능보다 높음을 알 수 있었다. 본 연구는 Pt-catalsyt를 대체할 수 있는 저가의 산소환원 촉매물질 발굴을 위해 미생물연료전지에서 사용된 전례가 없으며 현재 화학전지의 촉매로 널리 쓰이고 있는 Cobalt poly-pyrrole carbon의 산소환원 촉매로써의 이용가능성을 평가하기 위해 실시되었으며, 평가한 결과는 첫 번째로 Cobalt poly-pyrrole carbon을 사용한 경우가 촉매를 사용하지 않은 경우와 비금속 촉매보다 환원 전극부에서의 원활한 환원작용이 진행되고 있음을 추측할 수 있으며 Pt-catalyst와 비교하였을 때 성능 대비 저렴한 가격으로 가격 경쟁력에 있어서 우월하다고 판단되었고 두 번째로 전기화학적 성능평가 및 EIS를 이용한 환원전극부의 내부저항 평가를 실시한 결과 셀 전압에 있어서 가장 많은 도말량 ($2.0mg/cm^2$)이 높은 성능을 보이고 있음을 알 수 있었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.664-670
• /
• 2012

A study on the in situ regeneration effect of commercial deactivated SCR catalyst which had been exposed to the off gas from the heavy oil fired power plant for a long time was carried out in a simulated in situ conditions by washing with distilled water and various acid solutions in a short time. The catalytic performance test of the regenerated SCR catalysts was carried out in the micro reactor with simulated off gas of the heavy oil fired power plant and all prepared catalysts were characterized by BET, Porosimeter, EDX (Energy Dispersive X-ray spectrometer) and ICP (Inductively Coupled Plasma) to investigate correlations between catalytic activity and surface characteristics of them. The characterization results of the regenerated catalysts showed that the specific surface area was restored 95% more than that of fresh catalyst. Under this study, the activity of the regenerated catalysts with acid solution (3~6 M) without using ultrasonic wave in a simulated in situ conditions was restored 90% more than that of the fresh catalyst. It was found that improved activity of regenerated catalyst was caused by removing the deactivating materials from the surface of the deactivated SCR catalyst through acid washing.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.326-331
• /
• 2021

In this study, the preparation conditions for a TiO₂-based vanadium-based catalyst for oxidizing hydrogen sulfide at room temperature were optimized. Four types of commercial TiO₂ were used as a catalyst support and the performance evaluation of hydrogen sulfide oxidation at room temperature of V/TiO₂ by varying vanadium contents prepared using the impregnation method was performed. Among the types of TiO₂ tested, it was confirmed that the catalyst with the vanadium content of 5% and based on TiO₂(A) has the best hydrogen sulfide conversion rate of 58%. By comparing the physical and chemical properties of the catalyst, the specific surface area of the support and the species of dominant vanadium are the major factor in catalyst performance. In order to confirm the regeneration characteristics of the catalyst with reduced activity, heat treatment was performed at 400 ℃ for 2 h, and the amount of hydrogen sulfide oxidation decreased by 10% due to the partial deposition of sulfur in the regenerated catalyst, but it was confirmed that the initial performance was similar.