• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.181-188
• /
• 2012

The present study on nitrogen-diluted non-premixed counterflow flames with finite burner diameters experimentally investigates the important role of the outer edge flame in flame extinction. Flame stability diagrams mapping the flame extinction response of nitrogen-diluted non-premixed counterflow flames to varying global strain rates in terms of the burner diameter, burner gap, and velocity ratio are explored. There exists a critical nitrogen mole fraction beyond which the flame cannot be sustained, and also the curves of the critical nitrogen mole fraction versus the global strain rate have C-shapes in terms of burner diameter, burner gap, and velocity ratio. In flames with sufficiently high strain rates, the curves of the critical nitrogen mole fractions versus global strain rate collapse into one curve, and the flames can have the 1-D flame response of typical diffusion flames. Three flame extinction modes are identified: flame extinctions through the shrinkage of the outer edge flame with and without an oscillation of the outer edge flame prior to the extinction and flame extinction through a flame hole at the flame center. The measured flame surface temperature and a numerical evaluation of the fractional contribution of each term in the energy equation show that the radial conductive heat loss at the flame edge destabilizes the outer edge flame, and the conductive and convection heat addition to the outer edge from the trailing diffusion flame stabilizes the outer edge flame. The radial conductive heat loss at the flame edge is the dominant extinction mechanism acting through the shrinkage of the outer edge flame.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.605-615
• /
• 1996

Laminar flows in which mixing and chemical reactions take place between parallel streams of reactive species are studied numerically. The governing equations for laminar flows are from two-dimensional compressible boundary-layer equations. The chemistry is a finite rate single step irreversible reaction with Arrhenius kinetics. Ignition, premixed flame, and diffusion flame regimes are found to exist in the laminar reacting mixing layer at high activation energy. At high Mach numbers, ignition occurs earlier due to the higher temperatures in the unburnt gas. In diffusion regimes, property variations affect the laminar profiles considerably and need to be included when there are large temperature differences. The maximum temperature of a laminar reacting mixing layer is almost linear with the adiabatic flame temperature at low heat release, but only weakly at high heat release.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.167-169
• /
• 2012

본 연구는 정수기 화재의 원인 판정을 위한 지식기반을 구축하기 위해서 인위적 착화가 발생했을 때의 연소 확산 패턴을 해석하였다. 실험이 재현되는 동안 외부에서 인위적인 에너지의 공급은 없었으며, 정수기는 정상 작동 상태를 유지시켰다. 인위적 화염으로 착화되어 50[sec] 경과하였을 때까지 불꽃은 외부에서 관측되지 않았다. 그러나 120[sec] 정도 경과되었을 때 일순간 화염은 확산되기 시작하였으며, 부분적인 소락이 발생되는 것이 관측된다. 화염이 180[sec] 동안 진행되었을 때 강제로 진압된 후 연소패턴 분석에서 최초의 착화점을 기준으로 정확한 브이패턴(V-pattern)이 형성되었으며, 외부에서 화염이 공격되었을 때와 확연한 차이가 있음을 알 수 있다. 또한 정수기 후면에 설치된 방열판의 열화 특성 분석에서 화열의 공격방향 판정이 가능한 것을 알 수 있었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2000

The transient process simplified by the 1-D stretched laminar flame formed at the fuel-oxidizer interface was investigated using the coherent flame sheet model. Under the combustion environment of high temperatures and pressures the results show that the time required to reach the steady state was relatively short compared to the reverse of strain rate. Hence the employment of the tabulation of precalculated steady-flame results in the calculation of turbulent diffusion flames using the coherent flame sheet model is concluded valid, Also upstream temperatures were found to have only a minor effect on the nondimensional flame temperature and nondimensional fuel even through the letter is sensitive to pressure changes.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.145-152
• /
• 1998

실내에서 가스폭발시 피해를 예측하기 위해서 폭발 화염면의 전파를 수치해석을 통해 해석했다. 확산방정식에 의해 가스누출에 의한 실내의 가스확산분포를 구했으며 문헌에서 선택한 누출의 초기조건을 사용했다. 화염온도를 계산하기 위해 각 가스 혼합비에 따른 엔탈피와 화학식에 대한 reduced mechanism을 사용했으며 문헌에서 찾은 각 가스의 농도별 층류 연소속도를 혼합가스의 층류연소속도에 적용시켰다. k-$\varepsilon$ 모델에서 turbulance energy를 층류연소속도와 결합시켜 난류화염 전파속도를 모델링 했다. 화염면의 전파를 분석하기 위해 실내의 위치에는 직각, 화염면의 전파에는 원통좌표계를 사용했다. 유리창의 파손에 의한 화염전파면의 변화에 따른 압력상승 요인을 해석하였으며 창문의 크기에 따라서 점화위치에 따른 실내 압력상승의 영향이 서로 다르게 나타나는 결과를 얻었다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.196-201
• /
• 2003

대부분의 고체와 액체의 연소는 고체의 열분해에 의해 생성되는 가연성 기체나 액체의 증발에 의한 가연성증기가 공기중에 확산되는 형태의 확산연소이다. 이런 확산 연소에서 연소속도를 지배하는 요소는 연료와 산화제의 확산속도이며 고체와 액체 연료의 경우 기체상태의 열분해 생성물이나 증기의 생성속도가 연소속도에 영향을 미치는 요소가 된다. 이러한 형태의 연소에서 연료와 산화제의 공급상태에 따라 발열량 및 화염의 형태 등이 영향을 받게 된다. 화재에서 화재의 확대에 영향을 미치는 요소들 중에 화염의 높이와 복사열 에너지 등이 있다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3647-3653
• /
• 2010

An experimental investigation of the flame appearance and heat transfer characteristics in both unexcited and excited impinging inverse diffusion flames with a loud speaker has been performed. The flame is found to become broader and shorter (in length) with acoustic excitation. The heat flux at the stagnation point is increased with the acoustic excitation. The acoustic excitation is more effective in lean conditions than in rich conditions. The reasons for these behaviors are that acoustic excitation improves the entrainment of surrounding air into the jet. From this study, it is found that the maximum increase of 57% in the total heat flux is obtained at the stagnation point of $\Phi$=0.8. Therefore, it is ascertained that the excitation combustion can be adopted with effective instruments as a method for improving heat transfer in impinging jet flames.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.624-631
• /
• 1996

This study describes extinguishment mechanism of the purely buoyant diffusion flame using the water spray. Experiments are systematically carried out for the oul pool fire with the six different atomizing nozzles. From the measurement of burning rate which represents the combustion intensity of fire, it is observed that the water spray is able to act to enhance fire rather than to extinguish fire. The air entertainment due to the water spray is visualized to understand this phenomenon, acting to enhance fire. In order to observe effects of droplet size on fire extinguishment, and amount of water which reaches the flame base, fuel surface, and mean diameter of droplets are measured. When water droplets are too small, they do not reach the flame base because they can the water spray having too small doplets is ineffective for extinguishment of the oil fire.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2012

Acoustic-pressure response of diluted hydrogen-air diffusion flames is investigated numerically by adopting a fully unsteady analysis of flame structures in low and high pressure regimes. As acoustic frequency increases, finite-rate chemistry is enhanced through a nonlinear accumulation of heat release rate for any pressure regime, leading to a high amplification index. Same numerical results are analyzed with application of a pressure-sensitive time lag model, and thereby, interaction index and time lag are calculated for each pressure regime. The interaction index has the largest value in each pressure regime at an acoustic frequency near 1000 Hz. In a high-pressure regime, flames are more unstable than in a low-pressure regime. The interaction index shows a good agreement with the amplification index.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.04a
• /
• pp.61-83
• /
• 2005

연소현상의 가시화를 위한 몇 가지 레이저 진단기법의 응용 예를 소개한다. 이에는 유동 가시화를 위한 반응성 Mie 산란, 주화학종의 계측을 위한 Rayleigh 및 Raman 산란, 미소화학종 계측을 위한 레이저유도 형광법, 온도계측을 위한coherent anti-Stokes Raman 산란법 및 매연계측을 위한 광 소멸/산란법 등이 포함된다. 이러한 기법들이 확산화염, 층류 및 난류 부상 화염, 비예혼합 와도 내의 화염전파, 매연생성 등의 연구에 적용되어 물리적 메커니즘을 이해하는데 유용하게 적용된 사례를 보고한다.