• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.377-382
• /
• 1998

This study was carried out to investigate the relation between surface acidity and interfacial electrical characteristics of surface-treated ${\gamma}-alumina$ whose surface activity was increased. The points of zero charge (P. Z. C.) of ${\gamma}-alumina$ whose surface is treated with the sulfuric, nitric and hydro-chloric acid of various concentration were measured from the site-binding theory and mass transport method. The surface active sites were measured by amine titration method and Hammett indicator method. The interfacial properties at alumina/KCl(aq) interface were measured by potentiometric titration. From the experimental results, the following results were obtained. Pure ${\gamma}-alumina$ surface acidity decreases with the increase of calcination temperature at strength $H_o{\leq}+9.3$ Surface-treated alumina acidic properties increase with the anion loading on alumina surface. The surface ionization constants decrease with anion loading on alumina surface, then P. Z. C. decreases with acid amount on alumina surface. Acid amount of surface treated alumina can be correlated with surface charge density at strength $H_o{\leq}+4.8$ as follows. $SO_4^2-/Al_2O_3:Q_A=-0.172ln(0.0418{\sigma}+1.448)$ $NO_3^-/Al_2O_3:Q_A=-0.024{\sigma}-0.0189$ $Cl^-/Al_2O_3:Q_A=-0.01{\sigma}-0.2006$.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.31-42
• /
• 2001

In this study, we obtained fundamental data about Korean raw lacquer's physical and chemical properties to produce high quality lacquer. The tested raw lacquers were obtained from Won-ju in Korea, Shanxishang, Guizhoushang, Anhuishang in China. The drying time of refining lacquers, tensile strengths of dried films and uniformity of films are measured. The refined lacquers were prepared by experimentally scaled refining equipment. Films of lacquer were applied on glasses by film applicator. This films were tested by universal strength test machine. The films were pictured by scanning electron microscopy and confocal microscopy to define the uniformity of them. The refining method were not different among three different kind of raw lacquers which were different their collecting time and places. But the viscosity of them were quite different. When black refined lacquer is made with iron powder, the adding time of iron powder is critical to control the viscosity of it. The refining times, viscosity and tensile strength of refined lacquers were not depended the method of refining condition but the place of collecting of raw lacquer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.163-163
• /
• 2010

중적외선 영역 ($3{\sim}5\;{\mu}m$)은 공기 중에 존재하는 이산화탄소나 수증기에 의해 흡수가 일어나지 않기 때문에 군사적으로 중요한 파장 영역이며, 야간에 적을 탐지하는데 응용되고 있다. InSb는 77 K에서 중적외선 파장 흡수에 적합한 밴드갭 에너지 (0.228 eV)를 갖고 있으며, 다른 화합물 반도체와 달리 전하 수송자 이동도 (전자: $10^6\;cm^2/Vs$, 정공: $10^4\;cm^2/Vs$)가 매우 빠르기 때문에 적외선 화상 감지기 재료로 매우 적합하다. 또한 현재 중적외선 영역대에서 널리 사용되는 HgCdTe (MCT)와 대등한 소자 성능을 나타냄과 동시에 낮은 기판 가격, 소자의 제작 용이성 때문에 MCT를 대체할 물질로 주목 받고 있다. 하지만, 기판과 절연막의 계면에 존재하는 결함 때문에 에너지 밴드갭 내에 에너지 준위를 형성하여 높은 누설 전류 특성을 보인다. 따라서 InSb 적외선 소자의 구현을 위하여 고품질의 절연막의 연구가 필수적이라고 할 수 있겠다. 절연막의 특성을 알아보기 위해, n형 InSb 기판에 플라즈마 화학 기상 증착법 (PECVD)을 이용하여 $SiO_2$, $Si_3N_4$를 증착하였으며, 증착 온도를 $120^{\circ}C$에서 $240^{\circ}C$까지 $40^{\circ}C$ 간격으로 변화하여 증착온도가 미치는 영향에 대하여 알아보았다. 절연막과 기판의 계면 특성을 분석하기 위하여 77 K에서 커패시턴스-전압 (C-V) 분석을 하였으며, 계면 트랩 밀도는 Terman method를 이용하여 계산하였다 [1]. $Si_3N_4$를 증착하였을 경우, $120{\sim}240^{\circ}C$의 증착 온도에서 $2.4{\sim}4.9{\times}10^{12}\;cm^{-2}eV^{-1}$의 계면 트랩 밀도를 가졌으며, 증착 온도가 증가할수록 계면 트랩 밀도가 증가하는 경향을 보였다. 또한 모든 증착 온도에서 flat band voltage가 음의 전압으로 이동하였다. $SiO_2$의 경우 $120{\sim}200^{\circ}C$의 증착온도에서 $7.1{\sim}7.3{\times}10^{11}\;cm^{-2}eV^{-1}$의 계면 트랩 밀도 값을 보였으나, $240^{\circ}C$ 이상에서 계면 트랩밀도가 $12{\times}10^{11}\;cm^{-2}eV^{-1}$로 크게 증가하였다. $SiO_2$ 절연막을 사용함으로써, $Si_3N_4$ 대비 약 25% 정도 낮은 계면 트랩 밀도를 얻을 수 있었으며, 모든 증착 온도에서 양의 전압으로 flat band voltage가 이동하였다. 두 절연막에 대한 계면 트랩의 원인을 분석하기 위하여 XPS 측정을 진행하였으며, 깊이에 따른 조성 분석을 하였다. 본 실험에서 최적화된 $SiO_2$ 절연막을 이용하여 InSb 소자의 pn 접합 연구를 진행하였다. Be+ 이온 주입을 진행하고, 급속열처리(RTA) 공정을 통하여 p층을 형성하였다. -0.1 V에서 16 nA의 누설 전류 값을 보였으며, $2.6{\times}10^3\;{\Omega}\;cm^2$의 RoA (zero bias resistance area)를 얻을 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.309-309
• /
• 2011

지구온난화와 도시기후 변화에 대응하기 위해 자연의 생태적 기능을 복원하고 환경에 대한 오염부하를 저감하여 도시 환경의 건강성과 지속성을 높이기 위해 도심 내 물순환시스템(urban water circulating system)의 구축이 요구된다. 즉, 물순환시스템을 활용하여 도심 내 다양한 수원(생태하천/호수 유지용수, 하수처리수, 우수, 지하수 등)을 네트워크 및 통합 관리하여 도시 내 물순환의 건전성과 수자원의 재이용률을 향상시킬 수 있다. 이를 위해서 연중 발생량이 일정하고 막대한(66.4억톤/년, 2009년 기준) 하수처리수 방류수는 고도처리를 통해 수질이 양호하며 안정적인 대체 수자원으로 고려된다. 또한, 하수처리수의 재이용은 공공수역으로 배출되는 오염부하량의 총량 삭감 및 상수사용량의 절감과 수자원을 효율적으로 이용한다는 면에서 최근 재이용 사례가 증가하고 있는 추세이다. 그러나, 도심 내 친수공간(생태하천/호수)은 저류수량에 비해 유입수량이 적어 체류시간이 비교적 장시간이고, 이로 인해 부영양화가 쉽게 발생해 수질이 악화된다. 따라서, 본 연구에서는 하수처리수 재이용수를 도심 내 친수공간의 유지용수로 활용 시, 수질정화공정(응집 후 여과, 응집 후 여과+한외여과, 응집 후 여과+한외여과+역삼투 공정)이 친수공간 내 조류성장에 미치는 영향을 파악하기 위해, 하수처리수 재이용수 pilot plant의 수질정화공정별 유출수를 활용해 M. aeruginosa를 시험조류로 조류성장(growth kinetics)을 조사하였다. 조류는 $5\times104$ cells/mL의 초기 농도로 접종하여 배양하였으며, 조류성장에 직접적인 제한인자인 용존반응성인의 농도에 따른 성장속도를 Monod와 변형 Monod Kinetics를 이용해 반포화상수(Ks)와 최대 성장속도(${\mu}$max)를 산정하였다. 실험결과, 역삼투 공정을 제외한 다른 수질정화공정은 비록 영양염류가 80~90% 이상 제거되어 수계의 화학적 성상이 변하였으나 조류성장역학의 변화는 통계학적 (p=0.05)으로 유의할만한 수준은 아닌 것으로 판명되었다. 또한, 수리학적 체류시간이 2주 이상이 될 경우, 역삼투 공정을 제외한 수질정화공정 별 유출수에서는 조류의 과다성장으로 인해 부영양화가 발생하는 것으로 판명되었다. 결론적으로 하수처리수 재이용수를 친수용수로 활용시, 조류성장을 방지하기 위하여 용존반응성인의 농도를 중점적으로 관리하는 수질정화공정 및 유지용수 공급방안을 고려해야하는 것으로 판단된다.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1169-1174
• /
• 1999

2-Diazo-1-naphthoquinone-5-sulfonyl chloride(NQD-Cl) was synthesized from sodium 2-diazo-naphthoquinone-5-sulfonate by chlorination. NQD-Cl was esterified with hydroxybenzophenones to give several 1,2-naphthoquinone-(2)-diazide-5-sulfonic acid ester derivatives(NQD-esters). We have compared benzophenone derivatives with methoxy group to benzophenone derivatives with hydroxy group. Solubility of each NQD-ester was studied. Each of NQD-esters was formulated with novolac base resin and PS plates were manufactured. Photosensitivity, bleachability, compatible exposed time and relative sensitivity were determined by UV spectrophotometry, imaged by UV lithographic techniques, and the gray scale method. According to the number of substituted NQD group, it showed that relative sensitivity was different from gray scale method. NQD-esters with methoxy group showed a good solubility and higher sensitivity than commercial PS ones.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1014-1021
• /
• 1997

Studies were carried out on the preparation of several kinds of pulps from Sponge gourd fiber by KP, ASP, SP PAP, AP and addition of AQ pulping process. These unbeaten and beaten pulping fibers were observed their characteristics and fiber structure by SEM, FQA, Image analyzer and Micro projector. The results were summarized as follows; 1) The cooking condition which is the possible defibrilation of Shives are KP base($160^{\circ}C$, 2hr.), ASP base($155^{\circ}C$, 4hr.), PAP base($160^{\circ}C$, 1hr.). From the results, the kappa no. had the range of 12, 25, 10 each other. 2) The pulp yields of sponge gourd fiber obtained the range of KP 50~55%, ASP&60~70% and PAP 45~50%. SP base have the highest and contnets of KP&PAP base are much the same as woods. 3) Increasing amount of NaOH on Pulping was accelerated the defibrilation of Shives and was changed a morphology of pulping fiber quality such as fiber length, curl and kink index. 4) Addition of AQ on pulping process of sponge gourd fiber had a affect to raise the rate of delignification while protecting cellullosic components against degradation, especially defibrilation was very excellent, beated pulp much more easily and increased the fibrilation. 5) ASP system have higher bulk density, fiber bonding and protecting cellullosic components against degradation than KP or PAP. 6) The color reactions of the "C" stain solution showed blue or blue-gray with clean and transparency thin cell wall.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.1
• /
• pp.72-77
• /
• 2004

Background : A tracheobronchial obstruction in lung cancer is associated with significant morbidity and mortality due to dyspnea, cough, hemoptysis, and recurrent respiratory infection. It is well known that one of standard treatments is photodynamic therapy (PDT) in tracheobronchial obstruction after radiotherapy, chemotherapy, and/or surgery. We reported here the role of PDT in airway obstruction in patients advanced lung cancer. Method : Pre-treatment protocol consisted of clinical, radiologic, and bronchoscopic examination, pulmonary function test, and assessment of Karnofsky performance status. A 2 mg/kg of porfimer sodium was injected intravenously, and then followed by cylindrical and/or interstitial irradiation with 630 nm of laser after 48 hours. The repeated bronchoscopy for debridement of necrotic tissue and re-illumination was performed after 48 hours. Result : Improved airway obstruction and selective tumor necrosis were achieved by photodynamic therapy in all cases. Dyspnea and performance status were improved in three cases. A purulent sputum, fever and hemoptysis were improved in one of five cases. After PDT, all patients showed temporarily aggravation of dyspnea, two of five showed febrile reaction for a few days and nobody presented photosensitivity reaction, hemoptysis and respiratory failure. Conclusion : Our experiences of PDT are effective in palliation of inoperable advanced lung cancer in terms of tracheobronchial obstruction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.372-381
• /
• 2014

We investigated cause of non-outbreak of Cochlodinium polykrikoides blooms in the western coast of Jaran Bay during Summer, 2013, by combining chemical field data and physiological data of C. polykrikoides, which had been already published. The predominant species were mainly diatoms, and dominant species was Cerataulina pelagica, Chaetoceros spp., Navicula spp. and Nitzschia spp.. In case of dissolved inorganic nutrients in the western coast of Jaran Bay, dissolved inorganic phosphorus (DIP) was similar to that in previous outbreak period of C. polykrikoides blooms, but dissolved inorganic nitrogen (DIN) was lower. C. polykrikoides might be disadvantageous in competition with diatom species because half-saturation constants (Ks) of C. polykrikoides for inorganic nutrients was lower than those of diatoms. Also, the western coast of Jaran Bay, where DIN concentration is relatively low, was an unfavorable environment for growth of C. polykrikoides characterized by nitrogen dependence. Therefore, C. polykrikoides which have the disadvantageous position for competition of inorganic nutrient might have been suppressed by diatom blooms under environment of low nutrient in the western coast of Jaran Bay.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.212-218
• /
• 2020

When Radiofrequency energy is applied to the human body, the vibration width is very short. Therefore, the electrolyte burn generated when using the direct current does not occur. Ion molecules, polarized molecules, etc., vibrate more than 40,000 times per second, converting them into frictional heat to generate deep heat. The blood flow of capillaries increases 4-5 times more than at rest, increasing the supply of oxygen, nutrients, antibodies, and white blood cells. In addition, the electrochemical reaction does not occur because the vibration width and the pulsation period are very short. It is a physical factor treatment method that does not stimulate the sensory nerves and motor nerves. In this study, an isotonic exercise is performed in a young normal adult using a Radiofrequency pain treatment device. The purpose of this study is to integrate rehabilitation therapy by measuring electromyography data during isotonic exercise and confirming the effect on changes in motor neuron response. The EMG data generated when isotonic exercise of the forearm biceps muscle and the EMG data measured after the use of a Radiofrequency pain treatment device after exercise were RMS, respectively, and verified through t-test. It was confirmed that there was a significant difference in both men and women because the t-value was smaller than the significance level p (<.05).

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.101-114
• /
• 2011

The rock-carved Buddha statue at Dosolam (Korea Treasure No. 1200) of the Seonunsa temple in Gochang is unique style sculptured on natural rock cliff of 13.0m height. The Buddha statue is composed of volcanic complex with tuff, dacitic tuff breccia, tuff bereccia and lithic tuff. Especially, the Buddha statue is characterized by hydrothermal alteration and fragmentation on the upper and lower part. As a result of damage diagnosis, exfoliation and detachment of physical weathering are high of 11.3% and 9.3%, respectively. Infrared thermography analysis, exfoliation and micro-cracks occurred in the measuring parts that have not been confirmed by naked eyes. Chemical index of alteration and weathering potential index of host rock for the Buddha statue are 55.16 to 64.01 and 6.14 to 9.92 which are represented within highly weathering degree. In surface, dark black, reddish brown and white discoloration are observed prominently in the lower. Brown discoloration 6.9% is highest. According to the P-XRF measurements, high concentration of Fe in common, in part of dark black discoloration was Mn, white and brown discoloration in part of S and Ca content were higher. Biological weathering that yellowish brown and dark gray crustoes lichenes appeared by 20.8% and 13.3%, respectively. Therefore, comprehensive deterioration rate of Buddha statue show physical damage by 21.2%, discoloration for inorganic contaminants by 10.8% and biological damage by 39.4%. Ultrasonic velocity measurement carried out of Buddha statue on the surface by 555 points. Measured value of ultrasonic velocity was about 2,273m/s(1,067 to 3,215m/s, and weathering coefficient is 0.5(0.4 to 0.8) that progress on MW(moderately weathered) to HW(highly weathered) grade of rocks.