• Title/Summary/Keyword: 화학수축

Search Result 189, Processing Time 0.03 seconds

Clinical and Immunohistochemical Characteristics of Malignant Aortic Body Tumor in a Pekingese Dog (페키니즈에서 발생한 악성 대동맥체 종양의 임상양상과 면역조직화학적 특성)

  • Kim, Won-Jung;Kim, Seung-Gon;Lee, Chang-Min;Kim, Dae-Young;Park, Hee-Myung
    • Journal of Veterinary Clinics
    • /
    • v.31 no.5
    • /
    • pp.407-411
    • /
    • 2014
  • A 12-year-old castrated male Pekingese dog was presented with weakness, exercise intolerance, and an episode of coughing started 2 weeks earlier upon presentation. Physical examination revealed a grade II/VI left systolic heart murmur. Echocardiographic examination revealed a pericardial effusion and a mass at the heart base located beside the left atrium. The mass beside the left atrium was also visible on the thoracic radiograph after drainage of the pericardial effusion. An aortic body tumor was definitely diagnosed based on postmortem histopathological examination and immunohistochemical staining for specific markers. The dog lived 234 days after diagnosis with only medical management and without recurrence of the pericardial effusion.

Experimental Study on Tension-Hardening and Softening Characteristics in Reinforced Mortar with CSA Expansion Agent (CSA 팽창재를 혼입한 철근보강 모르타르의 인장 경화-연화 특성에 관한 실험적 연구)

  • Choi, Se-Jin;Ahn, Jung-Kil;Park, Ki-Tae;Kwon, Seung-Jun
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.18 no.1
    • /
    • pp.101-110
    • /
    • 2014
  • Expansion agent is a very effective admixture for prevention of cracking due to autogenous/drying shrinkage and this can induce internal chemical prestress to embedded reinforcement. In this paper, tension-softening and hardening in cement mortar with steel and CSA expansion agent are experimentally evaluated. Cement mortar with steel reinforcement is prepared and tensile strength test is performed for evaluation of cracking and tensile behavior. In spite of slightly reduced strength and elasticity in CSA mortar, significantly increased tension-hardening behavior is evaluated in CSA mortar with induced chemical prestress. Furthermore previous tension softening models are compared with the test results and improvement are proposed.

Analysis of the Characteristics of Manufactured Concrete, according to the Type of Admixture used when Remixing and Placing it (혼화제 종류별로 제조된 콘크리트의 재 혼합 타설시 특성 분석)

  • Ryu, Hyun-Gi;Shin, Sang-Yong
    • Journal of the Korea Institute of Building Construction
    • /
    • v.10 no.5
    • /
    • pp.95-102
    • /
    • 2010
  • In recent years, the demand for the development of high quality and cost effective materials, as well as the competition to ensure a diverse and sufficient amount of ready-mixed concrete, has been increasing rapidly. In this experiment, concretes made with different admixtures are blended with each other in different combinations and ratios, in order to identify potential problems. The first test was a slump level test, in which all of the concretes met the required numbers, as they also did in the test for air content. Plain organic acid concrete scored the highest in bleeding amount, but organic acid mix in general showed a similar outcome. In the early measurement of compressive strength, plain naphthalene concrete was the strongest. Of the blends, the 5:5 mix of organic acid and naphthalene was the strongest. In the standard measurement, the 5:5 mix of naphthalene and lignin was the strongest. Tensile strength tests revealed similar results. Length change rate proved to be greater in blended concrete than in plain concrete, and dry shrinkage rate was highest in the 7:3 ratio blends. Through SEM photo analysis, it was confirmed that the 7:3 ratio blends contained more micro-voids. In conclusion, with the exception of a specific few combinations, it was found that the blending of different types of concrete is undesirable due to the delayed coagulation time as well as the early decrease in strength.

A Study on Characterization of Expansion Agent in Mortar with Light Burned Dolomite By-Product (경소백운석(輕燒白雲石) 부산물(副産物)을 활용(活用)한 바닥 몰탈용 팽창재(膨脹材)의 특성검토(特性檢討))

  • Lee, Keon-Ho;Min, Sung-Eoi;Lee, Hyoung-Woo;Cho, Jin-Sang;Cho, Kye-Hong;Han, Choon
    • Resources Recycling
    • /
    • v.21 no.6
    • /
    • pp.12-22
    • /
    • 2012
  • This study investigated a utilization technology of light burned dolomite. light burned dolomite ($CaMg(CO_3)_2$) generated in furnace (steel manufacturer) is an alternative to quick lime. Using light burned dolomite has an effect on reducing the consumption of fluorite slag MgO concentration in supersaturated solution by prolonging the life of softening effect. Armophous MgO, not containing periclase is formed by firing dolomite under $800^{\circ}C$. It has larger surface area and higher reactivity than periclase, and also shows better expansion effect than quicklime. Due to those effects, therefore, armophous MgO produced from light burned dolomite is used as an alternative expansion agent in mortar. In the experiment, characteristics of light burned dolomite were compared to those of existing expansion agents such as anhydrite and quicklime. Then, each expansion and shrinkage rates were measured over a period of about 3 months in both of 1m Jis mold at labscale and apartment mortar flooring at field scale. In the result, it was observed that light burned dolomite in mortar flooring more compensates for the expansion and shrinkage rates than the existing expansion agents, showing low expansion rate of below 0.05% and also decreases the crack.

Preparation of shotcrete coarse aggregate with low grade clay and coal ash (저급 점토와 석탄회를 이용한 숏크리트용 골재의 제조)

  • Kim, Kyung-Nam;Jung, Hee-Su;Park, Hyun
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.20 no.3
    • /
    • pp.147-152
    • /
    • 2010
  • In this study, the artificial coarse aggregate was manufactured by using coal ash and low grade clay. The characteristics of a coal ash-clay system were investigated using XRD, XRF, TG-DTA, SEM and Dilatometer with various coal ash contents. The chemical compositions are the fly ash, bottom ash and clay, $Al_2O_3$ are 28.5 wt%, 32.4 wt% and 18.1 wt%, and $SiO_2$ are 33.0 wt%, 53.7 wt% and 68.4 wt% in weight ratio, respectively. The shrinkage of specimens started at around $850^{\circ}C$ and changed little up to $1100^{\circ}C$, but increased markedly at above $1100^{\circ}C$. The shrinkage rate is strongly related to the decarbonization amount of coal ash. At the sintering temperature $1150^{\circ}C$, it was found that quartz, mullite, anorthite and albite phase exist in all specimens. It was found that bottom-clay system specimen sintered at $1150^{\circ}C$ had a good compressive strength of 87.5 kg/$cm^2$, and the compressive strength of bottom-clay specimen was higher than that of fly-clay system specimen. The reusability of coal ash as a raw material in the process of shotcrete resources such as artifical coarse aggregate is highly expected.

Investigation on Properties of Cement Mortar Using Heat Treated Flue Gas Desulfurization Gypsum (열처리된 배연탈황석고를 혼입한 시멘트 모르타르의 물성 연구)

  • Chung, Chul-Woo;Lee, Yong-Mu;Kim, Ji-Hyun;Kim, Young-Su
    • Journal of the Korea Institute of Building Construction
    • /
    • v.16 no.6
    • /
    • pp.497-503
    • /
    • 2016
  • Flue gas desulfurization gypsum is produced from emission process of fossil fuel power plant to remove sulfur dioxide ($SO_2$) from exhaust gas. Production of flue gas desulfurization gypsum in Republic of Korea has been increasing due to the enforced regulations by government agency. Since flue gas desulfurization gypsum has characteristic that is similar to that of natural gypsum, there is a strong possibility for flue gas desulfurization gypsum to replace the role of natural gypsum. However, consumption of such material is still limited, only used for agricultural purposes or to make gypsum boards, it is necessary to expand the use of this material more aggressively. In this research, the chemical and mineralogical properties of flue gas desulfurization gypsum were investigated, and flue gas desulfurization gypsum with heat treatment was used to make cement paste. According to the results, it was found that flue gas desulfurization gypsum used in this experiment was a very high purity gypsum, and shown to have similar property to that of natural gypsum. Heat treating flue gas desulfurization gypsum above $100^{\circ}C$ was shown to bring beneficial effect on both compressive strength and drying shrinkage

An Experimental Study on the Quality Properties of the Expansive for Dry-Shrinkage Compensation of the On-Dol Floor Mortar (온돌바닥 모르터의 건조수축 보상을 위한 팽창재의 품질특성에 관한 실험연구)

  • 이종열;이웅종;정성철
    • Journal of the Korea Concrete Institute
    • /
    • v.13 no.4
    • /
    • pp.314-320
    • /
    • 2001
  • In this paper, the properties of an expansive agent (CaO-CaS $O_4$) for dry shrinkage compensation were investigated by a series of experimental program, which might be used at On-Dol heating system as mortar type. The expansion principle of the CaO-CaS $O_4$ was mainly verified. As a result of this study, the correlation between the content of the expansive agent and the compressive strength was obtained in the form of exponential function(Y = A $e^{-x}$), showing that as the content of expansive agent increased as the expansion performance with the compressive strength increased by only a certain amount. Also, as a results of the analysis of a correlation between the expansive performance and the chemical properties which generally accompanied a part of quality management in manufacturing the expensive cement, the expansive performance was relative to only the contents of the F-CaO among chemical properties(Blaine, +44$\mu\textrm{m}$R, F-CaO, S $O_3$,L.O.I). And it was clarified that the results were relative to the second order function, showing that if the contents of the F-CaO increased the expansive performance Increased.d.

The Utility of Measurement of Plasma N-terminal Pro-brain Natriuretic Peptide in Diagnosis of Pulmonary Hypertension (폐동맥고혈압 진단에 있어 N-terminal Pro-brain Natriuretic Peptide 측정의 유용성)

  • Hahn, Chang Hoon;Kang, Seok Min;Moon, Jin Wook;Cho, Jae Hee;Hwang, Sang Yon;Lee, Jung Min;Park, Moo Suk;Chung, Jae Ho;Kim, Young Sam;Kim, Se Kyu;Chang, Joon;Shim, Won Heum;Kim, Sung Kyu
    • Tuberculosis and Respiratory Diseases
    • /
    • v.56 no.1
    • /
    • pp.67-76
    • /
    • 2004
  • Background : Pulmonary hypertension is a poor prognostic factor in patients with chronic respiratory disease. However, diagnosing pulmonary hypertension is a difficult procedure which often requires an invasive test. Thus new alternative biochemical markers would be useful in clinical field and are in search. We sought to assess the role of plasma N-terminal pro-brain natriuretic peptide(NT-proBNP) in patients with pulmonary hypertension. Method : We measured plasma NT-proBNP level in twenty nine patients suspected for pulmonary hypertension. Pulmonary hypertension was defined as being right ventricular systolic pressure more than 35 mm Hg estimated by Doppler echocardiography. Plasma NT-proBNP level was measured by electrochemiluminescence sandwich immunoassay. Results : The log-transformed values for plasma NT-proBNP levels showed a linear correlation (correlation coefficiency: 0.783, p-value <0.001) with right ventricular systolic pressure. Plasma NT-proBNP levels closely correlated with right ventricular systolic pressure, right ventricular hypertrophy, interventricular septal flattening and right ventricular dilatation. Conclusion : Our results suggest that the measurement of plasma NT-proBNP level is an useful marker of the presence of pulmonary hypertension.

Microstructures and Electrochemical Properties of Si-M (M : Cr, Ni) as Alloy Anode for Li Secondary Batteries (리튬이차전지용 Si-M (M : Cr, Ni) 합금 음극의 미세구조와 전기화학적 특성)

  • Lee, Sung-Hyun;Sung, Jewook;Kim, Sung-Soo
    • Journal of the Korean Electrochemical Society
    • /
    • v.18 no.2
    • /
    • pp.68-74
    • /
    • 2015
  • To compare the microstructure and electrochemical properties between two binary alloys (Cr-Si, Ni-Si), two composition of binary alloys with the same capacity were selected using phase-diagram and prepared by matrix-stabilization method to suppress the volume expansion of Si by inactive-matrix. Master alloys were made by Arc-melting followed by fine structured ribbon sample preparation by Rapid Solidification Process (RSP, Melt-spinning method) under the same conditions. Also powder samples were produced by wet grinding for X-Ray Diffraction (XRD) and electrochemical measurements. As predicted from the phase diagram, only active-Si and inactive-matrix ($CrSi_2$, $NiSi_2$) were detected. The results of Scanning Electron Microscope (SEM) and Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy (TEM-EDS) show that Cr-Si alloy has finer microstructure than Ni-Si alloy, which was also predictable through phase diagram. The electrochemical properties related to microstructure were evaluated by coin type full- and half-cells. Separately, self-designed test-cells were used to measure the volume expansion of Si during reaction. Volume expansion of Cr-Si alloy electrode with finer microstructure was suppressed significantly and improved in cycle capability, in comparison Ni-Si alloy with coarse microstructure. From these, we could infer the correlation of microstructure, volume expansion and electrochemical degradation and these properties might be predicted by phase diagram.

생쥐의 자궁내막에서 발정주기에 따른 aquaporin 4, 5, 8의 발현양상과 존재부위

  • 이지원;계명찬;강수만;이성은;강한승;김문규
    • Proceedings of the Korean Society of Developmental Biology Conference
    • /
    • 2003.10a
    • /
    • pp.61-61
    • /
    • 2003
  • Aquaporins (AQPs)는 다양한 상피세포와 내피세포에 존재하며 다량의 물 수송을 촉진하는 막성단백질로 현재 11개의 AQP가 (AQP0-10) 발견되었으나, 아직 생리적, 기능적 분석은 불충분한 상태이다. 생쥐의 자궁내막은 발정주기 동안 호르몬의 자극에 따라 부풀어오르거나 수축하는 변화를 보이며 에스트로젠과 몇몇 혈관에 작용하는 매개체에 의해 자궁 혈관의 투수성이 증가한다는 보고는 있으나, 자궁액의 수송 메커니즘에 대해서는 뚜렷하게 밝혀진 바가 없다. 발정기의 생쥐 자궁은 자궁내막세포의 증식과 함께 수화되는 특징을 보이며 자궁내강으로 물이 수송되어 luminal fluid의 점성이 낮아지는 현상이 나타나는데, 이 때 AQP가 water channel로서 중요한 역할을 할 것으로 보고 본 실험에서는 면역조직화학법(immunohistochemistry)과 역전사중합효소연쇄반응(Reverse-transcriptase polymerase chain reaction)을 통해 발정기 자궁의 수화와 AQP 발현의 상관성에 대해 알아보고자 하였다. 면역조직화학법의 결과 발정주기의 다른 시기에 비해 발정기(estrus phase)에 자궁상피세포에 AQP4, 5, 8 protein이 다량 존재하는 것으로 밝혀졌고, 근육층(myometrium)에서의 발현은 발정주기 동안 차이가 없었다. Whole uterus로 RT-PCR을 수행한 결과 AQP4, 5, 8 mRNA는 luteal phase에 비해 follicular phase에 더 많이 발현하는 것으로 확인되었다. 또한 LCM(Laser Capture Microdissection) system을 이용하여 luminal epithelium과 stromal cell을 분리하여 RT-PCR을 수행한 결과 AQP4, 5, 8 mRNA는 stromal cell 보다는 luminal epithelium에 더 많이 발현하며, 이 역시 follicular phase에 발현량이 증가함을 확인하였다. 이러한 결과로 미루어 생쥐 자궁에서 AQP4, 5, 8은 발정주기 내막에 발현이 증가하며 이는 자궁내강 안으로 수분을 수송하는데 주요한 기작으로 사료되며 estrogen에 의한 조절 가능성을 암시한다.

  • PDF