• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.79-84
• /
• 2012

Combustion characteristics of outdoor advertisement materials were evaluated for fire risk assessment about fire expanding. At this study, the flame retardancy and the limiting oxygen index (LOI) was measured by UL 94 and ASTM D 2863 respectively. At the result of flame retardancy, foamex was V-0 grade and those of others were out of grade. LOI measurement showed that the LOI of foamex was highest in the samples. The cone calorimeter test was done by ISO 5660-1 to find the combustion characteristics. The cone calorimeter test showed that the outdoor advertisement materials were not good to prevent of fire expanding. The time to ignition (TTI) of flex was the fastest and the peak heat release rate (PHRR) as well as the total heat release (THR) of acrylic panel was higher than those of others.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.115-121
• /
• 2013

Industrial facilities are becoming bigger and more up to date, And a kind of the hazardous material used in the industrial filed is diversified. Therefore, serious accidents such as leakage of toxic materials, fire and explosion, is continuously occurred. There is Process Safety Management (PSM) system of the several preventive systems, but it is supposed to be a limitation to ensure safety or huge PSM industrial sites where have potential to catastrophically invisible and unexpected risks because it is still being managed by instruction and inspection of authority having jurisdiction other than self-regulating management differing from the primarily aim of PSM system. To verify safety management system of work-place, supplementation of existing system is urgently required. In this study, it suggests that PSM self-audit be emphasized significantly analyzing problems of the current systems for enhancing self-audit be emphasized significantly analyzing problems of the current systems for enhancing self-control safety through efficient self-audit management and improving the existing system and improving the existing as verifying the system there of, as well as studying methods which can support institutionally.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.43-53
• /
• 2007

In this research, in order to more concretely define the concept of the previously vaguely defined fire road, the authors propose new terminology called disaster prevention routes. These are defined as predefined access routes for the quick response to disaster areas. For this, the authors suggest selection techniques for disaster prevention routes considering characteristics of fire trucks and selected areas. The paper also includes legally-based ideas for the executive departments with exclusive responsibility for continuous management and supervision of disaster response. In addition, a case study is performed with a virtual scenario including the outbreak of fire in one borough of Seoul. This case study shows that the damage can be decreased by prompt access of fire trucks. The establishment of predefined access routes to disaster areas can help to protect citizens with more rapid response by emergency crews. Indirect benefits also include reduced congestion of roads through the prohibition of parking and stopping on the chosen roads.

• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.1-7
• /
• 2005

An accurate knowledge of the minimum oxygen concentration(MOC) is important in developing appropriate prevention and control measures in industrial fire protection. In this study, by using the literature data and RSM(response surface methodology), the new equations for predicting the MOC are proposed. The A.A.P.E.(average absolute percent error) and the A.A.D.(average absolute deviation) of the reported and the calculated MOC for hydrocarbons were $3.48\%\;and\;0.37\;vol\%$, respectively and the correlation coefficient was 0.919. The A.A.P.E and the A.A.D of the reported and the calculated MOC for halogenated hydrocarbons and hydrocarbons were $5.06\%$ and $0.59vo1\%$, and the correlation coefficient was 0.938. The values calculated by the proposed equations were in good agreement with the literature data. Therefore, it is expected that this proposed equations will support the use of the research for other flammable substances.

• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.93-104
• /
• 2005

Nowadays, the arson is not common interest happening. the arson has been handled with a crime of violence along with murder, robbery and rape. because of being detrimental to the public clam. but the arson a has not been made award of a serious social problem. There is a rise in the control possibility according to a level of national concern. we have known that the last fire accident of the Deagu underground It took a heavy toll of lives and the property due to our no interest in arson. The government and regional self governing community have fully aware of the serious of the arson so that we can make arrangement for overall measures. The government should not only make up for legislation and systematize to correct a defect but also there is uniting the countermeasure system of the organs. The government establish particular research institution of the arson to consider a useful countermeasure. The investigation authorities should develop the investigation technique to arrest an arsonist. The relevant post strengthen the public relation to bring up a private organization of fire prevention in order to prevent the arson to try the government best.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.2
• /
• pp.97-104
• /
• 2011

This paper deals with the quick and precise disaster prevention automation system (DPAS) based on information communication technology (IT) that detects fire and disasters in the building automatically and quickly and then activates the facilities to extinguish fire and disasters, monitoring such situation in a real time through wire-wireless communication network. The proposed DPAS is applied a programmable logic controller (PLC) of one-chip type which is smallsize and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLC analyzes detected signals from sensors in a case of fire and disasters, then activates fire extinguishing facilities for rapid suppression. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication. The transferred data sounds an emergency alarm signal, and operates a monitoring program. The proposed DPAS based on IT will minimize the life and wealth loss from rapid measures while prevents fire and disasters.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.8
• /
• pp.71-79
• /
• 2006

For clearing the cause of firing due to the tacking on the surface of phenolic resin, this paper describes the analysis through a couple of methods ; FT-IR; DTA; photograph analysis, etc. Phenolic resin has been widely employed as a case of low voltage appliances. In the experiment it was confirmed that its surface was carbonized and graphitized by the external fire. In the FT-IR test a graphite specimen thermally treated at $150[^{\circ}C]$ showed the 2 different IR absorption peaks at $1,730[cm^{-1}]\;and\;1,680[cm^{-1}]$. In normal phenolic resin, the exothermic peak appeared at $450[^{\circ}C]$, while in graphite specimen, it appeared at $610[^{\circ}C]$ in DTA test. From the results, the electrical fire causes could be cleared and it is expected to protect the human life and property from the electrical fire by using the important data.

• Fire Science and Engineering
• /
• v.20 no.1 s.61
• /
• pp.1-5
• /
• 2006

The spontaneous ignition of a flammable matter is a crucial factor for the prevention of a fire. The minimum ignition temperatures of Gasoline and Cenox in $1000{\mu}l$ of a sample were determined to be $340.5^{\circ}C\;and\;368.5^{\circ}C$ respectively. In addition when the time taken for ignition was 1.0 sec, the instantaneous ignition temperatures were $416^{\circ}C\;and\;427^{\circ}C$ respectively. Moreover, the changes in the minimum ignition temperature were small when less than 60 v/v% of Cenox was added, but the changes were great when 80 v/v% or more was added. Therefore, it is hypothesized that, when used as a fuel in the Gasoline engine, the ratio of the mixture of Cenox and Gasoline will be a very important factor.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.78-83
• /
• 2016

The characteristics of flame spread under similar atmospheric conditions to those inside the first stage of launch vehicles were investigated to provide fundamental knowledge to prevent fires and explosions of vehicles during launching operations. To this end, the rate of flame spread on the solid fuel was measured at elevated oxygen concentrations and reduced atmospheric pressures. A 0.18 mm diameter optical fiber was used as a solid fuel. The experimental results indicated that elevated oxygen concentrations can increase the rate of flame spread while increasing the atmospheric pressures to 1 atm can lead to decreases in the rate of flame spread. The increases in the rate of flame spread with pressure is due mainly to reductions in the convective heat loss that are clarified through an analysis of the pressure dependence on the convective heat transfer coefficient.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.31-35
• /
• 2006

This paper is studied on a protective control system for electrical fire used electrical characteristics of SCR and multilayer-type PTC thermistor. The PTC thermistor has characteristic or positive resistivity temperature coefficient according to the temperature variation, which is construction of a regular square and cube demarcation with $BaTiO_{3_}$Ceramics of positive temperature coefficient. Also PTC shows the phenomenon which is rapidly increased in the resistivity if the temperature is increased over Curie temperature point. This paper is proposed on a protective control system used multilayer-type PTC which is protected from electrical fire due to electric short circuit faults or overload faults. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.