• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.4
• /
• pp.253-261
• /
• 2024

Purpose. This study aimed to evaluate the effect of shell thickness on the fracture strength of provisional crowns fabricated by indirect-direct technique. Materials and methods. The study simulated the application of a provisional crown on a maxillary first molar implant abutment. A titanium metal die was milled by replicating a ready-made implant abutment. Using CAD software, shells for provisional crown was designed with varying thicknesses of 0.5 mm, 1.0 mm and 1.5 mm with different internal spaces for relining. These shells were 3D printed using photosensitive liquid resin and relined with PMMA resin to fabricate provisional crown specimens using indirect-direct technique. Ten specimens per each group were prepared. Fracture strength was measured by applying compressive loads vertically to the occlusal center of the specimens at a crosshead speed of 1.0 mm/min using a universal testing machine, and the maximum load value (N) at fracture was recorded. To compare the fracture strength between experimental groups, a one-way ANOVA followed by Tukey's post hoc test was conducted (α=.05). Results. The fracture strength was observed in the following order: Group 1.5 (1504.5 ± 141.30 N), Group 1.0 (1420.2 ± 182.05 N), and Group 0.5 (1083.1 ± 178.90 N). Group 1.5 was not significantly different from group 1.0, but was significantly different from group 0.5, and group 1.0 was also significantly different from group 0.5. Conclusion. The fracture strength of provisional crowns fabricated by the indirect-direct techniques were significantly different depending on the thickness of the shell. The fracture strength of the indirect-direct method was significantly lower when the shell thickness was 0.5 mm compared to 1.0 mm and 1.5 mm. This finding indicates that the shell should not be too thin when fabricating provisional crowns using the indirect-direct technique.

• Korean Journal of Plant Resources
• /
• v.29 no.5
• /
• pp.564-573
• /
• 2016

This research was performed to develop mass propagation method of round-leaved sundew (Drosera rotundifolia L.) for improving horticultural usefulness. Seeds were collected around Hwaseong-si, Gyeonggi-do in October of 2011 and experimented upon while being dry-stored at 4 ± 1.0℃ (darkness). Seed length of a major and minor axis were 1.58 ± 0.060 and 0.21 ± 0.016 ㎜, respecrively, and weight of 1,000 seeds was 6.24 ± 0.172 ㎎. Seeds were thus classified as ‘dwarf seeds’. Regarding the dormancy type, since round-leaved sundew seeds were dormancy broken and germinated at 20~30℃ under the light condition after wet-chilling treatment for 12 weeks, seeds were estimated to have physiological dormancy. Germination conditions of dormancy broken seeds were found to be 20℃ and light condition (54.7%), but germination decreased at higher temperature. Percent germination (PG), germination energy (GE), mean germination time (MGT) and T₅₀ were effectively improved by chemical treatment such as GA₃ 200 ㎎/L + kinetin 20 ㎎/L and wet-chilling treatment for 14 weeks. In conclusion these optimal conditions were thought to be a useful method for raising seedling uniformly.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.167-180
• /
• 1993

The effects of coating variables on the formation of aluminide coating layer with good oxidation resistance on the strongest hot-forged superalloy in the world, KM 1557 developed at KIST by pack cementation process were studied. Pack aluminizing were performed by high-activity process with pure aluminium powders and by low-activity process with codep powders. For high-activity process, Al deposition rate, growth rate of coating layer, and cross-sectional microstructures were influenced by the species and additive amounts of activators and the additive amounts of pure aluminium powders. For low-activity process, Al deposition rate, growth rate of coating layer, and the cross-sectional microstructures were not influenced by the species but additive amounts of activators. Surface structures of coating layer were influenced by the species of activators. Regardless of aluminium activity, Al deposition rate was proportional to the square root of time and parabolic rate constants were different with the species of activators. The activation energy for deposition of aluminium was different with the species of activators for high-activity process. Regardless of the species of activators, the activation energy for deposition of aluminium was 12~14 Kcal/mole for low-activity process.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.1
• /
• pp.44-48
• /
• 2005

Purpose: Ethylenediamine-tetramethylenephosphonic acid (EDTMP) has widely used chelator for the labeling of bone seeking radiopharmaceuticals complexed with radiometals. $^{153}Sm$ can be produced by the HANARO reactor at the Korea Atomic Energy Research Institute, Taejon, Korea. $^{153}Sm$ has favourable radiation characteristics $T1/2=46.7\;h,\;{\beta}_{max}=0.81\;MeV\;(20%),\;0.71\;MeV\;(49%),\;0.64\;MeV\;(30%)\;and\;{\gamma}=103\;keV\;(30%)$ emission which is suitable for imaging purposes during therapy. We investigated the labeling condition of $^{153}Sm$-EDTMP and imaging of $^{153}Sm$-EDTMP in normal rats. Materials and methods: EDTMP 20 mg was solved in 0.1 mL 2 M NaOH. $^{153}SmCl^3$ was added to EDTMP solution and pH of the reaction mixtures was adjusted to 3 and 12, respectively. Radiochemical purity was determined with paper chromatography. After 30 min. reaction, reaction mixtures were neutralized to pH 7.4, and the stability was estimated upto 120 hrs. Imaging studies of each reaction were perfomed in normal rats (37 MBq/0.1 mL). Results: The labeling yield of $^{153}Sm$-EDTMP was 99%. The stability of pH 8 reaction at 60, 96 and 120 hr was 99%, 95%, 89% and that of pH 12 at 36, 60, 96 and 120 hr was 99%, 95%, 88%, 66%, respectively. The $^{153}Sm$-EDTMP showed constantly higher bone uptake from 2 to 48 hr after injection. Conclusion: $^{153}Sm$-EDTMP, labeled at pH 8 reaction condition, has been stably maintained. Image of $^{153}Sm$-EDTMP at 2, 24, 48 hr after injection, demonstrate that $^{153}Sm$-EDTMP is a good bone seeking radiopharmaceuticals.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.307-312
• /
• 2010

'Cheonghaejinmi' is a new japonica rice variety developed from three-way cross between Samjiyeon/SR14694-57-4-2-1-3-2-2//Iri402 by the rice breeding team of National Institute of Crop Science, RDA. Heading date of this variety is August 18, 4 days later than that of 'Sobibyeo' in middle plain areas. It has culm length of 78 cm, 125 spikelets per panicle, 92.5% of ripened grain rate, and 23.9 g of 1000-brown rice weight. It showed 12 days of heading delay, and 63% spikelet fertility in cold-water irrigation stress. 'Cheonghaejinmi' is susceptible to blast disease, bacterial blight, virus diseases and plant hoppers. The nitrogen use efficiency of this variety is higher than that of Sobibyeo in low nitrogen application level. Milled rice of 'Cheonghaejinmi' exhibits translucent, clear non-glutinous endosperm and medium short grain. It has 5.9% protein content, 20.3% amylose content, and 0.28 palatability index of cooked rice compared to -0.11 of Hwaseongbyeo. The milled rice yield of 'Cheonghaejinmi' was about 5.31 MT/ha at low nitrogen application level of ordinary season culture. This variety had 98.8% whole grain in milled rice and 76% milling recovery of whole grain. 'Cheonghaejinmi' would be adaptable to middle plain areas and middle-western coastal areas in Korea.

• Journal of Life Science
• /
• v.26 no.5
• /
• pp.563-570
• /
• 2016

Onion vinegar has an undesirable flavor and taste that results from alcohol and acetic acid production from fermentation. In this study, we have used onion vinegar to develop an onion vinegar beverage with better sensory quality. The objective of this study was to determine the optimum blending ratio by using response surface methods to produce an onion vinegar beverage containing Yuza (Citrus junos Sieb ex Tanaka). The optimal formula for a fermented onion beverage was determined using a central composite design by the response surface methodology. The independent variables were obtained by regression analysis of the reaction surface of brown sugar, apple extracts and Yuza extracts. The optimum mixing ratio for onion vinegar:water:brown sugar:apple extracts:Yuza extracts was 6.0:77.6:4.9:9.2:2.3 (w/w). The actual overall acceptance was 7.08 under optimum conditions, which was close to the maximum predicted value of 6.96. The concentration of phenolic compounds, total flavonoids, and quercetin present in the onion vinegar beverage was 14.8 mg/100 g, 2.6 mg/100 g and 1.4 mg/100 g, respectively. The onion vinegar beverage showed antimicrobial activity against Staphylococcus aureus, Escherichia coli, Salmonella typhimurium and Enterobacter aerogenes. It also showed antioxidant effects, with a DPPH radical inhibition rate of 18.2% and superoxide dismutase (SOD)-like activity of 11.5%. In conclusion, the onion vinegar beverage described here seems to have nutritional value and potential biological activity.

• Journal of Life Science
• /
• v.22 no.6
• /
• pp.751-759
• /
• 2012

Microbulbifer sp. was used to acquire the degrading products from Ecklonia cava (DPEC) and the products were investigated to determine the physiological activities. Firstly, 2,2-diphenyl-1-picrylhydrazyl (DPPH) activity and superoxide dismutase (SOD) assay were about 84.1% and 89.6% at 2.5 mg/ml, respectively. In addition, nitrite scavenging ability was shown to be 56.3% at 0.5 mg/ml on pH 1.2. ${\alpha}$-Glucosidase inhibitory activity was increased in a dose-dependent manner and was about 58.7% at 2.5 mg/ml. To determine the influence of DPEC on alcohol metabolism, the generating activity of reduced-nicotinamide adenine dinucleotide (NADH) by alcohol dehydrogenase (ADH) and aldehyde dehydrogenase (ALDH) were measured. Facilitating rates of ADH and ALDH activities by DPEC were 123.3% and 215.2% at 2.5 mg/ml, respectively. For analyses of anti-wrinkling and whitening effects, its elastase and tyrosinase inhibitory activities were measured and were about 73.1% and 42.2% at 2.5 mg/ml, respectively. These results indicated that DPEC has valuable biological attributes owing to its antioxidant, nitrite scavenging, and alcohol metabolizing activities and ${\alpha}$-glucosidase, elastase, and tyrosinase inhibitory activities.

• Journal of Food Hygiene and Safety
• /
• v.2 no.1
• /
• pp.29-34
• /
• 1987

ABSTRACT$.$ Ethylene oxide (E.O) fumigation and gamma irradiation were applied to compar$.$ ative researches on the microbiological, physical and cooking quality of dried oak mushroom stored at $25^{\circ}C$ and different relative humidities. The equivalent moisture contents of dried oak mushroom for the limiting growth of general molds and xerophilic mold at $25^{\circ}C$ were shown to be 17% and 27% respectively. Total aerobic bacteria, molds and coliforms were sterilized at 5 kGy irradiation but E.O. fumigation was proved insufficient to eliminate the molds. The hydration rate of dried oak mushroom increased according to the increase of irradiation dose and soaking temperatures. and an irradiation by 5 kGy could shorten the hydration time of the sample as compared to E.O. treatment and control group. Sensory evaluation for the irradiated cooked sample was not significantly different in flavour but the texture of the gamma irradiated sample was significantly better(p < 0.01) than that of E. O. fumigated sample.sample.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.248-255
• /
• 2020

The effects of the coating thickness on the thermal durability and thermal stability of thermal barrier coatings (TBCs) with a gradient coating thickness were investigated using a flame thermal fatigue (FTF) test and thermal shock (TS) test. The bond and topcoats were deposited on the Ni-based super-alloy (GTD-111) using an air plasma spray (APS) method with Ni-Cr based MCrAlY feedstock powder and yttria-stabilized zirconia (YSZ), respectively. After the FTF test at 1100 ℃ for 1429 cycles, the bond coat was oxidized partially and the thermally grown oxide (TGO) layer was observed at the interface between the topcoat and bond coat. On the other hand, the interface microstructure of each part in the TBC specimen showed a good condition without cracking or delamination. As a result of the TS test at 1100 ℃, the TBC with gradient coating thickness was initially delaminated at a thin part of the coating layer after 37 cycles, and the TBC was delaminated by more than 50% after 98 cycles. The TBCs of the thin part showed more oxidation of the bond coat with the delamination of topcoat than the thick part. The thick part of the TBC thickness showed good thermal stability and oxidation resistance of the bond coat due to the increased thermal barrier effect.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.79-84
• /
• 2014

To investigate the plating properties of a diethylene glycol-based Ag immersion plating solution containing citric acid, silver immersion plating was performed in a range from room temperature to $50^{\circ}C$ using sputtered Cu specimens. The used Cu specimens possessed surface structure with large numbers of pinholes which were created with over-acid etching. The Ag immersion plating performed at $40^{\circ}C$ exhibited that the pinholes and copper surface were completely filled with Ag just after 5 min mainly due to galvanic displacement reaction, indicating the best plating properties. Subsequently, the surface morphology of Ag-coated Cu became rougher as the plating time increased to 30 min because of the deposition of silver nanoparticles created by chemical reduction in the solution. The specimen that its overall surface was covered with silver indicated the start of oxidation at temperature higher than around $50^{\circ}C$ in air as compared with pure Cu, indicating enhanced anti-oxidation properties.