• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.666-671
• /
• 1990

The characteristics of the corrugated conical horn antenna for the satellite communication earth station operating at C band is analyzed and its radiation patterns is measured. We obtain the characterstic equations for corrugated horn in the condition that the balanced hybrid mode is formed on born aperture and calculate radiation patterns in the Fresnel region from the aperture integral expressions obtained by the equivalence principle. The radiation patterns which are calculated for the frequency of 3.85GHz and 6.18GHz are well agreed with the measured data.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.14-19
• /
• 2011

Two difference cavitation models based on the homogeneous mixture model are used to study cavitating flows through converging-diverging channel. Here, the cloud cavities, pressure distributions and other results have been obtained and compared to evaluate two cavitation models. What's more, differences are observed in the simulated results, due to the differences in characteristics of each model. Analytical results shows that the new improvement cavitation model is validated to have better effects on simulating cavitating flows

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.175-180
• /
• 2020

In this study, we developed a micropattern technology in the shape of RFID TAG antenna using ultrasonic micropattern manufacturing system developed to enable micropattern technology. The ultrasonic tool horn in longitudinal vibration mode was installed in the micropattern manufacturing system to develop the ultrasonic press technology for the micropattern antenna shape of the RFID TAG antenna shape on the insulating sheet surface. The ultrasonic shaping technology was manufactured by applying the resonance design technique to a 60kHz tool horn, and by using the micropattern manufacturing system, the coil wire having a thickness of 25㎛ can be ultrasonically press-molded on an insulating sheet of 200㎛ or less. In ultrasonic press technology, the antenna shape having a minimum line width of 150㎛ could be molded without disconnection, peeling, or twisting of the coil wire.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1802-1811
• /
• 1994

In this paper, the corrugated horn antenna used in the reflector feed horn of satellite is analyzed using the modal expansion method. The modal expansion method is represented by the summations of modals at each point so the exact prediction of field and phase patterns can be obtained. The least number of iterations to compute field patterns is proposed. By using this number. calculation of accurate near and far field patterns without comsuming a lot of computational effort is available. Three kinds of corrugated horn antenna is designed to verify the method and experimented. The VSWR of designed frequency is from 1.04 to 1.1. The input impedance is nearly matched to $50\Omega$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.619-626
• /
• 2000

The electromagnetic fields of the corrugated annular feed-horn antenna have been analyzed exactly by using the finite-difference time-domain (FDTD) technique. The radiation pattern and return loss characteristics of the antenna were obtained as a function of the impedance of feeding coaxial line at 11.8GHz. The return loss was determined to be less than -25dB at 30$\Omega$. It was confirmed that the phase error is less compared to that of the antenna without corrugation, but the directivity of the radiation pattern needs to be improved.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2750-2753
• /
• 2008

This paper introduce the CFD analysis for predicting the heat transfer at the Ultrasonic horn. Approximately Ultrasonic horn separates two part. One is preheating part and the other is cooling part. Temperature of preheating part rise up by $260^{\circ}C$ that make it possible to attach a chip to a semiconductor. Also there is a piezo material in the cooling part. When piezo work, it generates heat of $100^{\circ}C$. It can stand by $150^{\circ}C$. But the high temperature conducted from the preheating part has a bad affect on the piezo. These situation make it necessary cooling at piezo. Previously except of the piezo, all of them are composed of the SUS440c that has good thermal conductivity. This study shows way that not only cooling the piezo but also cutting off the conduction between preheating part and cooling part by using the Ti and Duralumin that have low thermal conductivity compare with the SUS440c. Conclusion of CFD analysis that the heat coming from the piezo can't be transferred the horn cause of the Ti and Duralumin.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.426-433
• /
• 1986

This experiment was carried out to investigate the competitive ability and the interaction of each species in ten mono-and binary-associations of four forage species; orchardgrass, tall fescus, ladino clover, and alfalfa. Each species was grown in intra- and interspecific stands in large pots for one year. And samplings of shoot and root were taken in Spring, Summer, and fall clipping stages. Intra- and interspecific competition was compared and evaluated by expected yield, aggressivity, relative yield total(RYT), compensation index(CI), general combining ability(GCA), and specific combining ability (SCA) with shoot and root dry matter production of each species in monoculture and binary mixture. The forage yield was high in two grass species and the mixture of them, but low in two legume species and the mixture of them. The mixture of tall fescue-ladino clover was evaluated as a productive association with a high PYT(1.05) and a high SCA(0.79), and tall fescue was a more aggressive species in it. Each of grass-grass and legume-legume mixture was less aggressive between two species and lower SCAs than grass-legume mixtures. Especially, orchardgrass was the most agressive species and alfalfa was the least, but tall fescue had the highest GCA and ladino clover had the lowest in shoot competition. Also in root, tall fescue- ladino clover mixture was a good match with a high RYT(l.12) and a high SCA (0.60), and orchardgrass was highest in aggressivity. However, orchardgrass had the highest GCA in root while tall fescue had the highest in shoot.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.345-357
• /
• 2011

Recently, as part of diversifying energy sources and earth environmental issues, technology development of new renewable energy using wave energy is actively promoted and commercialized around Europe and Japan etc. In particular, OWC(Oscillating Water Column) wave power generation system using air flow induced by vertical movement of the water surface by waves in an air-chamber within caisson is known as the most efficient wave energy absorption device and therefore, is one of the wave power generation apparatus the closest to commercialization. This study examines air flow velocity, which operates turbine(Wells turbine) directly in oscillating water column type wave power generation structure from two-and three-dimensional numerical experiments and discusses optimal shape of oscillating water column type wave power generation structure by estimating the maximum flow rate of air according to change in shape. The three-dimensional numerical wave flume was applied in interpretation for this study which is the model for the immiscible two-phase flow based on the Navier-Stokes Equation. From this, it turned out that size of optimal shape appears differently according to the incident wave period and air flow is maximized at the period where minimum reflection ratio occurs.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.790-796
• /
• 2010

This paper designed the horn of half-wave needed for Ultrasonic meta) welding. The horn has to be designed and manufactured accurately, because measurements such as the shape, length, mass and etc. have effects on the resonant frequency and the vibration mode. Designed horn of half-wave has the feature of 40,000Hz of nature frequency, and maximizes vibration range in the Tip by resonance in the frequency of ultrasonic wave machine. In this study, we calculated and analyzed the natural frequency to find the optimal design of the horn that amplified the amplitude about double by the modal analysis and harmonic analysis using ANSYS. And we did FFT analysis of the manufactured horn.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.325-328
• /
• 2001

본 연구는 가전제품의 정보음을 평가할 수 있는 어휘 척도의 개발을 목적으로 행해졌다. 21명의 주부를 대상으로 8개의 주파수혼 정보음을 제시하여 각 정보음에 대해 30개의 형용사 쌍 체크리스트를 이용하여 5점 척도로 평가하게 하였다. 요인분석은 SPSS S/W를 이용하였고 요인추출 방법은 주성분법(principal component method)으로 하였으며 요인추출 갯수는 scree test와 최종요인구조의 심리적 해석에 기초하여 4개로 결정하였으며 해석의 용이성을 위하여 직교회전방법을 적용하였다. 가전제품의 경고음그룹 4개와 종료음그룹 4개로 구성된 주파수혼합 정보음의 적합성평가에 사용된 30개 형용사 쌍의 요인분석 결과, 4가지 요인구조로 가장 잘 설명할 수 있었으며, 첫 번째 요인은 긴박성 요인, 두 번째 요인은 명료성 요인, 세 번째 요인은 역능 요인, 네 번째 요인은 평가 요인으로 나타났다.