• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.517-518
• /
• 2009

The purpose of this dissertation was to develop a powered pre-mixed shotcrete material for securing a strict quality control by removing the variance of quality at field.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.85-94
• /
• 2007

The EVA polymer is used as a modifier in the repair mortar, which contains various admixtures and mineral admixtures. It has been reported that the effect of polymer in cement mortar by the cement-polymer ratio only, but effect of admixtures over the polymer mortar was unknown. In this study, the fresh and mechanical properties of polymer cement mortar influenced by the range of admixtures(CSA expansive addictive, CSA accelerator, gypsum, silica fume) ratio were investigated.

• Journal of the Korea Concrete Institute
• /
• v.26 no.5
• /
• pp.607-614
• /
• 2014

The purpose of this dissertation was to investigate the effect of mineral admixtures, such as fly ash, blast furnace slag powder, meta kaolin and silica fume, on the basic properties and durability of crushed sand shotcrete, selecting a series of shotcrete mixtures with a variable admixture. Compressive strength increased as the content of mineral admixtures increased, specially it was the most effective when using meta kaolin both at sample specimen and core after shotcreting. Rapid chloride ion permeability test and sulfuric acid resistance test showed that both durability increased as the substitute rate of mineral admixture increased. In air void analysis with image analysis, the targeted the spacing factor and specific surface were not satisfied because air-entrained agent was not used.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.893-896
• /
• 2008

As this study is to test fundamental properties of cement mortars using in Metakaolin. Recently concern is increasing for concrete durability because of an increase in the concrete structure exposed to bad environments. In the event that mineral admixture Added, microstructure will be fined, so durability can be good. Also, the study for new admixture is progressing expect that admixture widely used, for example, silica fume, fly-ash, and slag, etc. Therefore this study is making an experiment on fundamental properties of diversities sample curing at water, sea water, 10% sodium sulfate solution, and magnesium sulfate solution, to compare using for metakaolin with silica fume and fly-ash.

• 레미콘
• /
• no.1 s.58
• /
• pp.46-56
• /
• 1999

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.123-129
• /
• 2001

Pozzolan is to improve the strength and the durability of concrete as a result of the pozzolanic reaction, Broadly speaking, pozzolanic materials can be artificial materials, such as slica fume and fly ash, and natural material, such as rice husk ash, clay, volcanic ash, clayish pozzolan. Hwangtoh is a mineral which belongs to a group of matakaolin, especially halloysite, and the main elements is SiO$_2$, Al$_2$O$_3$, Fe$_2$O$_3$. The purpose of this study is to examine the application of Hwangtoh for the concrete admixtures, the composition of this study is shown as follows. Chapter I is analysis for properties of concrete as the kinds of admixture, and Chapter H is analysis for properties of concrete as the replacement ratio of activated Hwangtoh. As a result of this study, Hwangtoh is found to have high practical use as pozzolanic material, and the pertinent range of replacement ratios of Hwangtoh on cement are 10∼20 %.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.178-179
• /
• 2019

The purpose of this study was to investigate the possibility as mineral admixture of agriculture by-product. XRD and XRF analysis were performed on rice straw ashes at various combustion temperatures to identify chemical compositions. Also to evaluate properties of pozzolanic reaction, pH change method was tested.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.25-26
• /
• 2022

The purpose of this study is to prevent serious disasters in cold weather by presenting an optimal blending design for securing high early strength when placing concrete by analyzing the properties and compressive strength of concrete formulations using high early strength admixture materials.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.67-68
• /
• 2023

After mixing the pozzolan-based powder and water repellent with porosity into the cement mortar, microanalysis and measurement of the water repellent contact angle confirmed that the NZS specimen using natural zeolite had the highest contact angle. The specific surface area is increased due to the porosity of natural zeolite, so the adhesion of silane-siloxane is relatively better than that of FA, and it is judged to have a uniform distribution inside the mortar.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.679-686
• /
• 2014

In this research, the mix proportion of the antiwashout underwater concrete with the mineral admixture was evaluated. It can reduce the amount used of the antiwashout admixture (hereinafter referred to as "AWA") and satisfy the properties of concrete. In addition, the review for the difference of the test and practical affairs were conducted. Optimized unit quantity of water of antiwashout underwater concrete and the amount used of AWA was revealed by $190kg/m^3$, 0.9%/W, respectively. In particularly, the mix design is reduced by 5% than the W/B of target strength even though the W and AWA reduced. Therefore, it will have the economical feasibility and qualities including the material separation, resistance characteristic and compressive strength, and etc. The stable value was shown in 1 point of minute passed in the measurement of the turbidity amounts using the turbidimeter after the checker insertion. However, it needs to be reviewed for the interrelationship between turbidity measuring machine and KCI-AD102 standard method. There were no significant differences of compressive strength of specimens in the water depending on the production methods.