• Resources Recycling
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2010

The spheric sintered body with $6{\pm}2mm$ diameter was manufactured in a rotary kiln at $1125^{\circ}C$/15 min using green body formed by pelletizing the batch powder composing of coal bottom ash produced from power plant and dredged soil by 70:30, wt%. And the physical properties of sintered body (BD) were analyzed to confirm the possibility for applying to an absorbent to restore a contaminated soil. The sintered body had a giant pore above 100 ${\mu}m$ and a fine pore below 10 ${\mu}m$, and bulk density was 1.4. Also its specific surface area, porosity and void proportion were $12.0m^2/g$, 30.1% and 38.2% respectively. The crushed body (BD-C), produced by crushing a BD specimen into an irregular shape with a aspect ratio of about 2, was similar to BD specimen at bulk density and pore size distribution. But it had superior values of specific surface area, porosity and void proportion compared with BD specimen owing to a decreased apparent volume due to conversion of closed pore existed at interior of BD to open pore during a crushing process. The IEP of sintered body occurred at about pH=5, so the optimum pH condition of reacting aqueous solution could be known before bonding a microbe to the sintered body. Hence, the optimum void proportion and porosity of an absorbent can be obtained by appropriate mixing a BD with BD-C from the base data calculated in this study.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.215-228
• /
• 1977

In order to provide good germplasm for developing good corn hybrids, a total of 948 Korean indigenous corn lines were collected from various parts of country and major morphological characterstics of ears were investigated. The results obtained were as follows; 1) Ear Type; From the east-north mountaionus region where more than 80% of total corn production is practiced, cylinder (type I) or similar types to cylinder corn were collected, and from the southern plain region, where rather small scales of corn is grown, cone type (type IV) or similar types to cone were prevalent. 2) Kernel color; In the ear colors of all the indigenous corn lines collected from ten regions, ears with mono color were 54.4%, ears with two color mixed were 39.0% and ears with three or more color mixed were 6.6%. In northern mountainous region, region A and region I, ear color was mostly white or white plus other colors, while in other regions ear color was yellow or yellow plus other colors. 3) Denting; Dent type was only 4.3% of Korean indigenous corn lines collected, and others were flint type. Dent type was collected from northern regions, where foreign corn varieties were introduced and grown. 4) Ear row number; Ear row numbers of indigenous corn lines collected were 12 to 16. There was no significant differences among the ear row numbers in a ear ciassified by regions. However, it was observed that ear row number was closely related to kernel size. For instance, the ears with 24 ear-rows were the smallest in kernel size. 5) Quality of starch; 70.9% of the indigenous corn lines collected were kernels with hard starch. Corn with soft starch was 26.0% and medium type was 3.1%. In region A and region I, where lot of corn is grown, corn with hard starch was more frequently collected. 6) Pop corn and waxy corn; In all the indigenous corn lines collected, popcorn was distributed uniformly through the regions except region I, and waxy corn was found more in the northern mountainous region. 7) Ear length; The mean ear length of indigenous corn lines collected was 13cm. In region A and region I ear length was larger than that in other regions. 8) Ear diameter; The mean ear diameter of indigenous corn lines collected was 3.3cm. In region A and region I ear diameter was larger than that in other regions. 9) Kernel length, kernel width and kernel thickness; The mean kernel length, kernel width and kernel thickness of indigenous corn lines collected were 0.82cm, 0.42cm, and 0.78cm, respectively. The kernel size in the region A and region I was larger than that in other regions. 10) Ear weight; The mean ear weight of indigenous corn lines collected was 58.04gr. Ear weight was remarkably heavier in region A and region I. The heaviest ear weighed 330gr, and the lightest ear weighed 5 gr. 11) Kernel weight of a ear and 100 kernel weight; Kernel weight of a ear and 100 kernel of indigenous corn lines collected were 47.07gr and 15.07gr, respectively. Kernel weights and 100 kernel weights were much heavier in region A and region I than other regions.

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.1
• /
• pp.24-30
• /
• 2003

Purpose: To clarify the results of simple bone cyst (SBC) treatment in children by percutaneous autologous bone marrow grafting and xenografting. Materials and Methods: We studied seven cases (4 males, 3 females) of SBC, which were treated by percutaneous autologous marrow and heterograft bone grafting from January 1996 to February 1999. Their mean age at surgery was 10 years (6 to 15), and the mean follow-up period was 35.6 months (20 to 52). Three cases were located in the proximal and middle humerus; three cases were in the proximal femur; and one case occurred in the ilium. Mean volume was 14.7 $cm^2$ (10 to 23). Six cases were active, and one was inactive. Five patients had a history of receiving a mean of 3.2 steroid injections. The mean quantity of bone marrow used in treatment was 14.3 ml (10 to 20), and the mean amount of $Lubboc^{(R)}$ heterograft bone (Transphyto S.A. Clermont Ferrand, France) used was 6.4 blocks (5 to 10). Results were analyzed using the modified Neer classification. Results: Five cases completely healed with obliteration of the cyst cavity (Grade IV). Two cases demonstrated sclerosis around a partially visible cyst (Grade III). All treatment results were satisfactory and without intraoperative or postoperative complications. Conclusione: Percutaneous autologous marrow and heterograft bone grafting is recommended as an effective treatment method for simple bone cyst. It offers ease of operative technique, a high rate of healing, a low recurrence rate, low morbidity, a low incidence of postoperative complications, and free from bone graft donor site problems.

• 한국가스학회:학술대회논문집
• /
• 2003.10a
• /
• pp.120-125
• /
• 2003

본 연구는 원자력 발전소에 있는 방화벽의 케이블 관통부위에 설치된 CPFS(Cable Penetration Fire Stop)시스템 안에서 일어나는 동적열전달 현상을 3 차원으로 나타낼 수 있는 시험시뮬레이터에 사용될 수학적 모델과 수치계산 알고리즘의 개발에 관한 것이다. CPFS 내에서 일어나는 열전도 현상을 나타내는 지배방정식은 주어진 조건들 하에서 포물선형 편미분방정식(Parabolic PDE)으로 나타난다. 문제를 단순화하기 위해 열의 흐름을 두 성분으로 나누었다 즉, 케이블과 평행한 선을 따라서 일어나는 열전도와 벽면과 평행한 평면 위에서 일어나는 열전도로 나누었다. 먼저 선을 따라 일어나는 동적 열전도 현상을 나타내는 PDE를 연속과완화(SOR: Successive Over-Relaxation)를 적용하여 유한한 불연속점들에 대한 연립 상미분방정식(ODE)으로 전환했고, 그 연립방정식은 ODE Solver 를 이용하여 풀 수 있었다. 둘째로, 각 불연속 점에 위치한 평면 위에서 일어나는 열전도를 계산하기 위해서, 유한요소의 합을 근사식으로 이용하여 PDE를 ODE로 전환해서 계산하는 유한요소법(Finite Element Method)이 이용된다. 여기서 시간과 공간의 함수 T(x, y, z, t)인 온도는 각 선의 점들과 각 평면의 요소들에 대해서 일정한 시간간격으로 초기온도와 경계온도를 업데이트하여 계산을 반복한다. 이러한 일련의 계산결과를 바탕으로 CPFS 시스템 내에서의 온도분포의 동적인 변화를 해석한다. 결론적으로 관통하는 케이블이 CPFS 시스템의 온도분포에 매우 중요한 역할을 한다는 것을 알 수 있다. 시뮬레이션 결과는 CPFS 내의 온도분포를 쉽게 이해할 수 있도록 3 차원 그래픽으로 나타냈으며, 상용소프트웨어 FEMLAB 으로 계산한 결과와 비교해서 개발된 모델과 계산 알고리즘의 정당성을 보였다. 맞이하고 있음을 볼 수 있다. 국내광업이 21C 급변하는 산업환경에 적응하여 생존하기 위해서는 각종 첨단산업에서 요구하는 소량 다품종의 원료광물을 적기에 공급 할 수 있는 전문화된 기술력을 하루속히 확보해야 하며, 이를 위해 고품위의 원료광물 확보를 위한 탐사 및 개발을 적극 추진하고 가공기술의 선진화를 위해 선진국과의 기술제휴 등 자원산업 글로벌화 정책이 절실히 요구되고 있음을 알 수 있다. 또한 삶의 질을 향상시키려는 현대인의 가치관에 부합하기 위해서는 각종 소비제품의 원료를 제공하는 광업의 본래 목적 이외에도 자연환경 훼손을 최소화하며 개발 할 수밖에 없는 구조적인 어려움에 직면할 수밖에 없다. 이처럼 국내광업이 안고 있는 여러 가지 난제들을 극복하기 위해서는 업계와 정부가 합심하여 국내광업 육성의 중요성을 재인식하고 새로운 마음가짐으로 관련 정책을 수립 일관성 있게 추진해 나가야 할 것으로 보인다.의 연구 결과를 요약하면 다음과 같다. 첫째, 브랜드 이미지와 서비스 품질과의 관계에서 브랜드이미지는 서비스 품질의 선행변수가 될 수 있음을 증명하였으며 4개 요인의 이미지 중 사풍이미지를 제외한 영업 이미지, 제품 이미지, 마케팅 이미지가 서비스 품질에 영향을 미치고 있음을 알 수 있다. 둘째, 지각된 서비스 품질과 가격 수용성과의 관계에서, 서비스 품질은 최소 가격에 신뢰서비스 요인에서 정의 영향을 미치고 있으나 부가서비스, 환경서비스에서는 역의 영향을 미침을 알수 있고, 최대 가격에 있어서는 욕구서비스 요인은 정의 영향을 미치지만 부가서비스의 경우에는 역의 영향을 미치고 있음을 알 수 있다. 셋째, 서비스품질과 재 방문 의도와의 관계에 있어서 서비스품질은 재 방문 의도에 영향을 미침을 알 수 있다. 따라서 브랜드 이미지는 서비스품질의 선행변수가 될 수 있으며, 서비스품질은 가격 수용성과 재방문 의도에 영향을 미치고 있음을 알 수

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.149-149
• /
• 2011

청정 에너지원으로 높은 잠재력을 가지고 있는 가스하이드레이트는 상업적 기술개발이 미확보된 상태임에도, 우리나라에서 부존이 직접적으로 확인되었기 때문에 에너지원으로서 그 중요성이 부각되고 있다. 현재 전세계적으로 가스하이드레이트 개발 및 생산에 관한 연구가 활발히 진행되고 있으며 이에 대한 기초자료로서 가스하이드레이트가 함유된 퇴적층의 물성자료가 필요하다. 이에 따라 본 연구에서는 입도 분포별 총 5가지의 미고결 시료를 대상으로 투과도, p파속도, 전기비저항 측정을 수행하였다. 연구에 사용된 미고결 시료는 Hama#5($774{\mu}m$), #6($485{\mu}m$), #7($258{\mu}m$), #8($106{\mu}m$) 4가지와 Hama#6과 Hama#7을 1:1($371{\mu}m$)로 혼합하여 사용하였다. 실험에 사용된 장비는 가스하이드레이트를 인공적으로 생성시키기 위해 퇴적층을 모사할 수 있는 고압셀과 자료획득장비, 유체 주입장비, 온도 유지장비이다. 또한 투과도 측정에는 차압계, 전기비저항 측정에 RLC meter, p파속도 측정에 음파 송수신장비를 사용하여 각각의 물성을 측정하였다. 실험과정을 단계별로 요약하면 먼저 시료를 고압셀에 충진한 뒤 주입된 물의 양으로부터 공극률을 측정하고, 절대 투수계수를 측정하였다. 그 후, 메탄가스를 주입하여 퇴적층 내 수포화도(water saturation)를 잔류상태(irreducible saturation)로 유지시키고 메탄가스를 추가적으로 주입하여 원하는 압력까지 가압한 뒤 온도를 $1^{\circ}C$로 낮추었다. 가스하이드레이트의 생성은 급격한 압력강하로부터 알 수 있다. 최종적으로 가스하이트레이트가 함유된 퇴적층의 상대 투수계수를 측정하기 위해 메탄가스를 주입하였고 각각의 측정장비를 통해 전기비저항 및 p파 속도를 측정하였다.$V_g$, $V_h$, $V_w$, $V_ss$는 각각 가스의 부피, 하이드레이트의 부피, 물의 부피, 모래의 부피이다. 또한 수포화도, $S_w=\frac{V_w}{V_v}$이며 하이드레이트 포화도, $S_h=\frac{V_w}{V_v}$, 가스 포화도, $S_g=\frac{V_g}{V_v}$로 정의된다. 본 실험의 결과 투과도는 가스의 부피비, $\frac{V_g}{V}=nS_g$에 민감한 반응을 보였으며, 비저항은 공극수의 부피비, $\frac{V_w}{V}=nS_w$에 민감한 반응을 보였다. 또한 p파 속도는 고체의 부피비, $\frac{V_s+V_h}{V}=n(1-S_h)$에 민감한 반응을 보였다. 이러한 실험의 결과는 가스하이드레이트 개발, 생산 연구에 있어 기초 물성자료로 활용되는데 도움을 줄 것이다.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.103-108
• /
• 2005

${\alpha}-Amylase$ inhibitor is used to control blood glucose level by inhibiting starch digestion in the small intestine and delaying the absorption of glucose. In this study, we investigated the effect of the ethanol extracts from more than 1400 species of plants against ${\alpha}-amylase$ with the aim of developing a new ${\alpha}-amylase$ inhibitor. In the results, Cornus walteri extracts showed the highest inhibition activity. The inhibitory effect of Cornus walteri extract on the carbohydrate hydrolysis enzymes has different sensitivities against ${\alpha}-amylase$ from salivary and pancreatin and against ${\alpha}-glucosidase$ from yeast and porcine small intestine. In the study of inhibition kinetics of ${\alpha}-amylase$ and ${\alpha}-glucosidase$, Cornus walteri extract showed competitive inhibition against salivary and pancreatin while showing the combination of uncompetitive and noncompetitive inhibition against ${\alpha}-glucosidase$. The Cornus walteri extract was stable at acidic and thermal conditions. As for the blood glucose and body weight levels of Cornus walteri extract, we confirmed anti-hyperglycemic and anti-obesity effects. Also, in the investigation of the mRNA lever, Cornus walteri extract upregulated the level of GLUT4 mRNA in the quadriceps muscle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1084-1089
• /
• 2008

This study was carried to investigate the proximate compositions, capsacinoids, organic acid of various red pepper (Capscium annuum L.) seeds. Twenty domestic varieties of red pepper seeds cultivated in Korea and four foreign varieties of samples cultivated in New Mexico, USA were analyzed. In proximate composition of the various red pepper seeds, ash content showed a range of $3.11{\pm}0.03{\sim}3.77{\pm}0.01%$, and protein content showed a range of $13.25{\pm}0.01{\sim}16.53{\pm}0.08%$. On the other hand, crude lipid content showed wide range distribution of $18{\sim}30%$ and total dietary fiber showed a range of $40{\sim}65%$. Capsaicin content of various red pepper seeds showed $0.09{\pm}0.04{\sim}5.32{\pm}0.14\;mg%$ and dihydrocapsaicin was $0.00{\sim}2.17{\pm}0.18\;mg%$. Capsaicin content was higher than dihydrocapsaicin content. In the organic acid content, Dangchan, Chohyang and Mixed red pepper seed showed a low range of $1.6{\sim}1.9%$; in contrast, Chunhamujuk, Samgang, Ganggun, Wangdaebak, Chunhailpum, New Mexico 6 and LB-25 showed higher values of over 5%.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.365-383
• /
• 2004

Granitic rocks in the southeastern Gyeongsang Basin can be classified into three groups. The group I contains various mafic microgranular enclave (MME) and/or mafic clot which implies magma mixing or mingling. The group II show the feature of shallow depth emplacement at low pressure, and the group III is characterized by A-type granite implying extensional tectonic environment. Mineralogical characteristics of the granitic rocks have showed systematic variations in perthite exsolution temperatures and biotite compositions according to their rock facies, although they do not show any distinctively different trend in geography and textures or rock facies. Amphiboles from Group I are calcic-amphibole and they were formed at 0.4 ～ 2.8 kb in pressure based on the amphibole geobarometry. Amphiboles from group ill are riebeckite, whileas amphiboles were not observed in Group II. The chemical composition of biotite defined in clusters showing a continuous spectrum between group I to ferric-annite of group ill. The composition of plagioclase generally plotted in albite, oligoclase, and andesine area without any distinctive differences among their geography or rock facies. The exsolution temperatures by perthite geothermometry are calculated as $300～400^{\circ}C$ in Group I, and 500～$600^{\circ}C$ in equigranular granite of group II and alkali-feldspar granite of group III.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.45-50
• /
• 2009

By Laser Through-Silicon-Via process, debris and particles occur when you are forming. Therefore the research of TSV cleaning become important to remove those particles and debris. Both chemical cleaning method that uses a surfactant and physical cleaning method that uses a brush were studied with the via of $30{\mu}m$ diameter and $100{\mu}m$ depth on the 8 inch CMOS Image Sensor wafer. On the DI water and a surfactant in mixture ratio of 2:1, debris show $73{\mu}m^2$ per $0.054mm^2$. Cleaning is superior by lower mixture ratio of DI water and surfactant. In addition, It is less than 5% of debris distribution in the laser condition changed by Laser's frequency and its speed and cleaning had no effect. In the physical cleaning, there are no crack and damage when the system condition is set by $1000{\sim}3000rpm$ strip, $50{\sim}3000rpm$ rinsing, and $200{\sim}300rpm$ brushing Therefore, debris and particles can be removed by enforced chemical method and physical method.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.127-136
• /
• 2011

In this study, annual maximum storm events are proposed to determined by the return periods considering total rainfall and rainfall intensity together. The rainfall series at Seoul since 1961 are examined and the results are as follows. First, the bivariate exponential distribution is used to determine annual maximum storm events. The parameter estimated annually provides more suitable results than the parameter estimated by whole periods. The chosen annual maximum storm events show these properties. The events with the biggest total rainfall tend to be selected in the wet years and the events with the biggest rainfall intensity in the wet years. These results satisfy the concept of critical storm events which produces the most severe runoff according to soil wetness. The average characteristics of the annual maximum storm events said average rainfall intensity 32.7 mm/hr in 1 hr storm duration(total rainfall 32.7 mm), average rainfall intensity 9.7 mm/hr in 24 hr storm duration(total rainfall 231.6 mm) and average rainfall intensity 7.4 mm/hr in 48 hr storm duration(total rainfall 355.0 mm).