• Geotechnical Engineering
• /
• v.14 no.2
• /
• pp.79-92
• /
• 1998

Parametric studies based on laboratory pilot tests were performed to investigate the relationships between electrical resistivity and properties of contaminated soils. Three kinds of sandy soils sampled and leachate from an industrial waste landfill were mired to model the contaminated soils. Electrical resistivity of soils was measured by using a simulated resistivity cone penetrometer probe. In the experiments. the electrical resistivity was observed by changing the water content, void ratio, unit weight, degree of saturation, and concentration of the leachate. The test results show that the electrical resistivity of soils depends largely on the water content and the electrical property of pore water rather than unit weight and types of soils.

• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.227-231
• /
• 1990

Kinetic studies on the nucleophilic reactions of p-substituted benzylnitrates with substituted anilines have been conductometically carried out in 50-100% $CH_3CN-CH_3OH$ mixtures. From the kinetic data, Hammett ${\rho}_C$ and ${\rho}_N$ values, Bronsted $\beta$ values, and solvatochromic coefficients were determined in order to examine the transition state variations caused by changes in substituents and solvent properties. It is concluded that the reaction proceeds via a synchronous $S_N2$ mechanism in which bond formation is more advanced than bond cleavage.

• Journal of the Korean Chemical Society
• /
• v.41 no.9
• /
• pp.443-448
• /
• 1997

Kinetics for the solvolyses of acyl chlorides and alkyl chlorides in hydroxylic solvent mixtures have been measured by conductometric method at various temperatures and pressures. The activation parameters (${\Delta}V^{\neq},\; {\Delta}H^{\neq},\; {\Delta}S^{\neq}$) were estimated from the rate constants. The reactivities of these reactions were also estimated from the correlation of the activation volumes with the activation entropies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.103-105
• /
• 2009

본 연구에서 우리는 single walled carbon nanotube(SWNT) 용액 속의 TEOS와 VTMS 바인더가 나노튜브 센서의 감도의 증가와 선택성을 가지는 것에 대해서 조사하였다. 일반적으로 혼합된 SWNT 용액 속의 유기 화합물인 바인더는 기판에 잘 부착된다. 그리고 가수분해 된 바인더의 표면에는 바인더가 경화 되었을 때 기능화 된 하나의 그룹이 형성된다. 그것은 SWNT의 표면에 가수분해 된 TEOS와 VTMS의 -OH와 $-CH=CH_2$ 같이 기능화된 그룹이다. 그러므로 전하는 carbon nanotube와 흡착된 분자 사이에서 이동되고 그에 대한 영향으로 전기적인 전도성이 변화한다. 이 실험에서 증가되어지는 알콜 농도에 따라 TEOS 바인더를 사용한 센서의 저항은 감소하는 반면 VTMS 바인더를 사용한 센서의 저항은 증가한다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.46-48
• /
• 2008

나노복합 블레이드가 반도체 웨이퍼 가공을 위한 마이크로급 나노장치나 그 이상의 나노급 구조체를 위해 사용되었다. 금속 블레이드는 실리콘 웨이퍼 가공을 위해 사용되어 왔다. 그러나, 최근 레진 복합 블레이드는 반도체나 핸드폰의 쿼츠 웨이퍼 가공에 사용된다. 유기 또는 비유기 재료 선정은 기계가공성, 전기 전도성, 강도, 연성 및 웨이퍼 저항을 가진 블레이드를 만드는데 중요하다. 고성능 응용의 증대 요구에 따라 개발된 고기술 비유기성 재료의 혼합은 낮은 가격에 고기능의 신뢰도를 필요로 한다. 나노 입자의 크기를 가진 레진 복합물의 마이크로 설계는 입자간 상호작용의 제어가 필요하다. 형상 제작 동안 마이크로 차원에 두께를 유지하기 위해서는 마이크로/나노급 제작을 위한 가공기술이 중요한 것 중의 하나이다. 본 연구에서는 핫 프레스 구조물이 원래 설계 기준과 두께 차이의 실험 접근법을 사용해 만들어졌다. 다른 습식 공정 기술은 차원의 허용치를 개선하기 위해 만들었다. 실험들과 해석들은 신뢰성 결과가 사용가능함을 보여주었다. 반도체 시장에 사용될 레진 복합 블레이드의 개선 효과가 논의되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.234-234
• /
• 2011

IGZO 투명 전도 박막은 TFT-LCD에 사용되는 투명 전도성 산화물 박막으로서 다양한 광전자 소자의 투명 전극으로 널리 사용되고 있다. 본 연구에서는 RF magnetron sputtering법으로 corning 1737 유리기판 위에 RF 파워의 변화에 따라 증착한 IGZO박막의 광학적 전기적 특성 변화를 연구하였다. 박막 증착 조건은 초기 압력 $2.0{\times}10^{-6}$ Torr, 증착 압력 $2.0{\times}10^{-2}$ Torr, 반응가스 Ar 50 sccm, 증착 온도는 실온으로 고정하였으며, 공정변수로 RF 파워를 25 w, 50 w, 75 w, 100 w로 변화시키며, IGZO 타겟은 $In_2O_3$, $Ga_2O_3$, ZnO 분말을 각각 1 : 1 : 2 mol% 조성비로 혼합하여 소결한 타겟을 사용하였다. 표면분석(AFM)결과 RF 파워가 증가함에 따라 거칠기가 증가하였으며, XRD 분석결과 Bragg's 법칙을 만족하는 피크가 나타나지 않는 비정질 구조임을 확인할 수 있었다. 가시광 영역에서 (450 nm~700 nm) 25 w일 때 85% 이상을 확인하였고, RF 파워가 증가할수록 밴드갭이 감소하는 것을 확인하였다. RF 파워가 100 w인 경우 carrier 밀도는 $7.0{\times}10^{19}\;cm^{-3}$, Mobility 13.4 $cm^2$/V-s, Resistivity $6.0{\times}10^{-3}\;{\Omega}-cm$로 투명전도막의 특성을 보였다.

• Membrane Journal
• /
• v.13 no.1
• /
• pp.47-53
• /
• 2003

Poly(ether ether ketone)(PEEK) was sulfonated using sulfuric acid and blended with polysulfone with various ratios. The blended polymer electrolyte membranes were characterized in terms of methanol permeability, proton conductivity and ion exchange capacity. As the amount of sulfonated PEEK increased, both methanol permeability and proton conductivity increased. This was due to the increase of ion exchange capacity. The experimental results indicated that the blend membrane with 20% polysulfone was the best choice In terms of the ratio of proton conductivity to methanol permeability.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.48-55
• /
• 2024

The electrochemically active site of mixed ionic and electronic conductor (MIEC) as a cathode material is restricted to the triple phase boundary in protonic ceramic fuel cells (PCFCs) due to the insufficient of proton-conducting properties of MIEC. This study primarily focused on expanding the electrochemically active site by La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ(LSCF6428)-BaZr_0.4Ce_0.4Y_0.1Yb_0.1O_3-δ (BZCYYb4411) composite cathode. The electrochemical properties of the composite cathode were evaluated using anode-supported PCFC single cells. In comparison to the LSCF6428 cathode, the peak power density of the LSCF6428-BZCYYb4411 composite cathode is much enhanced by the reduction in both ohmic and non-ohmic resistance, possibly due to the increased electrochemically active site.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.265-270
• /
• 2003

In spite of high ionic conductivity, the polymer gels have poor mechanical properties and high reactivity with lithium metal anode. To solve these problems, the dry solid systems and polymer composites have been intensively studied, due to their good mechanical, thermal, chemical, and electrochemical stability. The objectives of this experiment were to improve ionic conductivity and mechanical properties of the solid polymer electrolytes based on PEO-LiClO$_4$. To obtain higher ionic conductivity and better mechanical properties, ceramic or rubber phase was added in the PEO-LiClO$_4$(8:1) matrix. The results showed that ionic conductivity and mechanical properties were improved. The ionic conductivity of the samples was as high as 10$\^$-5/ S cm$\^$-1/. This value is similar to the best ionic conductivity ever reported in the solid drying system. To obtain better results, we used PEO with various molecular weights (600∼8000) and changed the salt contents. By using DSC, we found that the addition of salt reduced the crystallinity of PEO. The mobility of polymer dependence on salt contents was examined by FT-IR.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.625-629
• /
• 1991

The electrical conductivity of the Niobium Oxide-Lead Oxide systems containing 2.5, 5.0, 7.5, and 10.0 mol% of Lead Oxide has been measured in a temperature range 700${\sim}$$1100^{\circ}C$ under oxygen partial pressure of 2.0 ${\times}$ $10^{-1}$${\sim}$1.0 ${\times}$ $10^{-5}$ atm. The electrical conductivities of the system decreased with increasing PbO mol% and varied from $10^{-5}$ to $10^{-1}$ $ohm^{-1}$ $cm^{-1}$. The activation energy for conductivity was about 1.70 eV. The oxygen pressure dependence of electrical conductivity revealed that the system was a mixed conductor between ionic and electronic conductivities at high oxygen pressures and a n-type electronic conductivity with oxygen pressure dependence of -1/4 order at low oxygen pressures. The defect structure and electrical conduction mechanism of the system have been discussed with the data obtained.