• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.55-60
• /
• 2010

The purpose of this study is to analyze compact city planning indicators that have influence on public transportation commuting of residents in the 54 medium and small-sized cities. In the study, land use and transportation infrastructure of cities and other socio-demographic variables are used as explanatory variables in a causal model. 96,552 subjects from 54 cities in korea are selected as the final sample, and a statistical analysis is carried out by applying Random Intercept Logit Model. Analysis shows that a high level of density and jobs-housing balance in the city results in more public transportation commuting. And higher access to bus and subway station influence commuting, so subway & bus stop are important factors to increase public transportation commuting

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.40-46
• /
• 1999

Zn-Ni alloy electrodeposition on steel has been examined by means of X-ray diffraction and scanning electron microscopy. The effect of current density, $Ni^{2+}$ ion concentration, and $Cl^-$ ion concentration on the structure as well as morphology of the electrodeposit have been studied. The Ni content of the electrodeposit increased with decreasing current density in the range studied in this work. The Ni content of the electrodeposit also increased with increasing $Ni^{2+}$ ion and $Cl^-$ ion concentrations. The structure change of the electrodeposit was closely related to the Ni content. In fact, the mixture phase of ${\eta}$ and ${\gamma}$ was found below 10 wt.% of Ni while the ${\gamma}$ phase only was observed above 10 wt.% of Ni. In addition, the lattice parameter, a, of then phase structure increased and the lattice parameter, c, of it decreased as the Ni content of the electrodeposit increased. The morphology of the electrodeposit varied from the plate-like shape to the fine granular shape depending upon the change in composition and structure of the electrodeposit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2314-2320
• /
• 2015

MBR (Membrane Bio-Reactor) process is known to consume enormous energy to control membrane fouling. To solve this problem, electro-coagulation technique has been applied to MBR. A series of electro-coagulation was applied to activated sludge suspension under different current density condition. After the electro-coagulations, membrane filtration of the activated sludge suspensions was conducted to investigate the effect of electro-coagulation on the fouling. As current density increased 10 to 40A/m2, the total fouling resistance (Rc+Rf) decreased from 18 to 79%, showing that the electro-coagulation improved the membrane filtration efficiency. Both the organic concentration in bulk and the particles size distribution were not nearly changed before and after the electro-coagulation. The enhanced filtration efficiency might be due to the aluminum hydroxide generated from chemical precipitation, which can be acted as a dynamic membrane preventing a deposition of foulants on membrane surfaces.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1373-1377
• /
• 2008

강우-유출에 의해 성층화된 저수지로 유입하는 하천수는 저수지 표층에 비해 낮은 수온과 높은 부유물질(SS) 농도를 가지므로 저수지 표층수보다 상대적으로 높은 밀도를 유지한다. 하천으로부터 유입한 밀도류는 유속에 의한 관성력이 두 수체의 밀도차에 의한 음의 부력보다 큰 구간까지는 저수지 표층을 따라 진행하지만, 두 힘이 같아지는 지점에서 밀도류는 더 이상 진행하지 못하고 저수지 수면 아래로 침강하며 이 과정에서 수체간의 많은 혼합이 일어난다. 따라서 홍수시 유입한 탁수의 침강점에 대한 정확한 예측은 수질관리를 위한 현장조사, 그리고 탁수거동 해석 및 최적관리대책 마련에 중요한 요소이다. 본 연구의 목적은 홍수시 대청호로 유입하는 하천 밀도류의 침강위치를 홍수규모별로 경험식과 수치모델을 통해 산정함으로써 두 방법 간의 장 단점을 비교하고, 탁수 현장조사와 최적관리를 위한 기초정보를 제공하는데 있다. 유입수의 모의조건은 그 동안 대청호에서 발생한 홍수 크기를 기준으로 9개의 등급으로 나누었으며, 저수지 성층조건은 여름철 탁수가 유입되기 전의 발달된 성층구조를 적용하였다. 유입수와 저수지 성층구조의 특성치는 밀도 Froude 수($Fr_i$)로 나타냈으며, $Fr_i$ 조건별로 침강점 위치를 저수지 단면을 삼각형태로 가정한 Hebbert et al.(1979) 경험식과 2차원 수치모델로 산정하여 그 결과를 비교하였다. 대청호로 유입한 탁수는 홍수규모에 따라 대정리 수역에서 회남수역 사이 구간에서 침강하였으며, $Fr_i$ 값이 클수록 침강점 수심이 깊어지는 경향을 보였다. 경험식으로 산정한 침강점 수심은 정상상태 조건을 가정하므로 홍수에 의한 수위변화를 고려하지 못하며, 실제의 불규칙한 하상표고를 일정한 하상경사로 가정하기 때문에 2차원 모델의 결과보다 과대산정하는 경향을 보였다. 따라서 홍수가 연속해서 발생하며 수위변화가 심한 국내 저수지 여건에서 하천 유입 밀도류의 거동을 보다 정확히 예측하기 위해서는 2차원 또는 3차원 수치모델을 적용하는 것이 타당할 것으로 판단된다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.166-175
• /
• 1989

In this paper, we present a method which is based on the concept of the rotation of subspaces. This method is highly related to the angle (or distance) between subspaces arising in many applications. An effective procedures is first derived for finding the optimal transformation matrix which rotates one subspace into another as closely as possible in the least squares sense , and then this algorithm is applied to the solution to general direction-of-arrival estimation problem of multiple broadband plane waves which may be a mixture of incoherent, partially coherent or coherent. In this typical application, the rotation of signal subspaces (ROSS) algorithm is effectively developed to achieve the high performance in the active systems for the case in which the noise field remains invariant with the measurement of the array spectral density matrix (or data matrix). It is not uncommon to observe this situation in sonar systems. The advantage of this techniques is not to require the preliminary processing and spatial prefiltering which is used in Wang-Kaveh's CSS focusing method. Furthermore, the array's geometry is not restricted. Simulation results are presented to illustrate the high performance achieved with this new approach relative to that obtained with Wang-Kaveh's CSS focusing method for incoherent sources and forward-backward spatial smoothed MUSIC for coherent sources including the signal eigenvector method (SEM).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.381-384
• /
• 2008

The artificial lightweight aggregate was manufactured using stone-dust(SD) and bottom ash(BA) from crushed aggregate manufacture process and thermoelectric power plant respectively. The properties of artificial lightweight aggregate according to mixing ratio of SD and BA was that the density was decreased and the absorption was increased with increasing BA content, because bottom ash was contained many unburned carbon and $Fe_2O_3$ which generates gas by oxidation during a sintering process. The appropriate mixing ratio of SD and BA was estimated at about 5:5. The properties of artificial lightweight aggregate according to addition flux admixture was that it had lower density with increasing of $Na_2SO_4$ content. In this study, we could developed the artificial lightweight aggregate as the bulk density was $1.52g/cm^3$ and water absorption 7.3% under the condition that mixing ratio of SD:BA was 5:5, $Na_2SO_4$, $Fe_2O_3$ 1%, sintering temperature $1,150^{\circ}C$ and sintering time 15mins.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.3
• /
• pp.27-35
• /
• 2015

This study presents a volume rendering method using ambient occlusion which is one of global illumination methods. By considering the volume density distribution as normal distribution, ambient occlusion can be calculated at real-time speed regardless of modification of opacity transfer function. We calculate and store the averages and standard deviations of densities in a block centered at each voxel in pre-processing time. In rendering process, we determine the illumination value by estimating the nearby opacity. We generalized theoretical model and generated better quality images improving our previous research. In detail, various shapes of transfer function can be used due to the proposed equation model. Moreover, we introduced a multi-range model to give nearer objects more weight. As the result, more realistic volume rendering image can be generated at real-time speed by mixing local and ambient occlusion shading.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.55-60
• /
• 2009

Porous silicon film is fabricated by electrochemical etching in a chemical mixture of HF and ethanol. Effects of Si type, Si resistivity, ultrasonic frequency, current density and etching time on surface morphology of PS film were studied. Electrochemical etching in ultrasonic bath promotes the uniformity of porous layer of Si. Frequency of ultrasonic was increased from 40 kHz to 130 kHz to obtain uniform pores on the Si surface. When current density was higher, the sizes of pores were larger. The new etching cell using back contact metal and current shield help to overcome nonhomogeneity and current crowding effect, and then leads to fabricate uniform pores on the Si surface. The distribution of pore size shows no notable tendency with etching time.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.63-69
• /
• 2010

This study investigates the chemical resistance of the recycled aggregate concrete containing calcined ground slag, fly ash, and diatom powder. The recycled aggregate which had the density of $2.48g/cm^3$, the absorption of 4.25%, and standard gradation was used and the concrete specimens were submerged in solutions of $Na_2SO_4$ and $CaCl_2$ at 10% concentration for 6 months. As the submersion result, pore volume of over $0.02{\mu}m$ diameter was formed less in the concrete specimens containing calcined ground slag, fly ash, and diatom powder than in the concrete without the pozzolanic materials and the result shows the effectiveness of the pozzolanic materials for the increase of chemical resistance of the recycled aggregate concrete.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.219-224
• /
• 2013

In this study, the inorganic insulating material was fabricated with quartzite, ordinary portland cement(OPC), lime and anhydrous gypsum. After characteristic analysis of slurry, the optimum mixing ratio was derived with different $CaO/SiO_2$ mole ratio. Based on derived mixing ratio, the inorganic insulating material was fabricated at different water content and hydrothermal synthesis conditions. Specific gravity was $0.26g/cm^3$, compressive strength was 0.4 MPa, and thermal conductivity was 0.064 W/mK. This properties were enhanced performance of conventional ALC (Autoclaved Lightweight Concrete). And it can replace organic insulation with harmless inorganic insulation through continues research and development.