• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.467-467
• /
• 2013

유기물/무기물 나노복합체는 메모리, 트렌지스터, 발광 다이오드, 태양 전지 소자에 응용이 시도되고 있으나 유기물의 물리적인 특성 때문에 전류 전송 메커니즘 규명에는 충분한 연구가 진행되어 있지 못하다. 유기물/무기물 나노복합소재를 기반으로 차세대 광학소자나 비휘발성 메모리 소자에 대한 연구가 활발히 진행되고 있으며, 기억소자의 성능 향상을 위하여 여러 가지 유기물/무기물 나노복합소재를 사용하여 제작한 유기 쌍안정성 소자가 차세대 플렉서블 비휘발성 기억소자로 대두되고 있다. 유기 쌍안정성 소자는 비휘발성 기억 소자 중에서 구조가 간단하고 제작비용이 저렴하며 유연성을 가지기 때문에 많은 연구가 진행되고 있다. 많은 장점에도 불구하고 유기물에 관한 많은 연구가 이루어지지 않았기 때문에 소자의 동작특성, 재연성 등의 문제점이 있다. 본 연구에서는 유기 쌍 안정성 소자의 전기적 특성을 연구하기 위하여 ZnO 나노입자를 포함한 PMMA 복합층을 사용하여 소자를 제작하고 전기적 특성을 측정하였으며, 유기물/무기물 나노복합소재의 전류 전송 메커니즘을 이론적으로 규명하였다. 트랩밀도 변화가 유기 쌍안정성 소자에 미치는 영향을 연구하기 위하여 C60 층을 삽입하였고, 그 결과 C60이 삽입된 유기 쌍안정성 소자가 향상된 메모리 특성을 보였다. 소자의 제작은 Indium tin oxide가 증착된 유리 기판위에 C60 층을 스핀코팅 방법으로 적층하였다. ZnO 나노 입자와 PMMA를 혼합하여 스핀코팅 방법으로 C60층 위에 박막을 형성한 후, 전극으로 Al을 열증착으로 형성하였다. Space charge limitted current 메커니즘을 이용하여 simulation을 수행하였고 이를 current density - voltage (J-V) 특성과 비교 분석하였다. J-V 특성 결과, simulation결과, 소자의 구조를 통해 유기물/무기물 나노복합소재 기반 메모리 소자의 쓰기, 지우기 및 읽기 동작에 대한 과정을 설명하였다. 또한 C60층을 삽입한 유기물/무기물 나노복합소자를 이용하여 트랩 밀도 변화가 유기 쌍안정성 소자의 전기적 특성에 미치는 영향을 연구하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.3
• /
• pp.127-139
• /
• 2014

In this paper, we present two signal processing techniques for designing binary error correction codes for Multi-Level Cell(MLC) NAND flash memory. MLC NAND flash memory saves the non-binary symbol at each cell and shows asymmetric channel LLR l-density which makes it difficult to design soft-decision binary error correction codes such as LDPC codes and Polar codes. Therefore, we apply density mirroring and EM algorithm for approximating the MLC NAND flash memory channel to the binary-input memoryless channel. The density mirroring processes channel LLRs to satisfy roughly all-zero codeword assumption, and then EM algorithm is applied to l-density after density mirroring for approximating it to mixture of symmetric Gaussian densities. These two signal processing techniques make it possible to use conventional code design algorithms, such as density evolution and EXIT chart, for MLC NAND flash memory channel.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.1-8
• /
• 1991

The electronic and magnetic structure of Fe overlayers on W(110) is determined by means of the all-electron local spin density full potential linearized augmented plane wave (FLAPW) method with a single slab approach. Charge and spin densities, magnetic moments, contact hyperfine fields, and layer projected density of states (LDOS) are presented. For bilayer Fe coverage, we find magnetic moments to be 2.90 and 2.30 ${\mu}_B$ for the surface and subsurface Fe layers, respectively, corresponding to a 18% enhancement of the total magnetization compared with the calculated bulk value (2.22${\mu}_B$);For monolayer coverage the moment is 2.56 ${\mu}_B$ which is enhanced by 16% compared to bulk. Unusual changes in the magnetic hyperfine interaction are found in going from a monolayer to a bilayer coverage. Comparison of the results to the theoretical ones of the clean Fe(110) to discuss the hybridization and the negative pressure effects. We discuss our results by comparing them to experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.146-152
• /
• 2016

This paper describes a multi-physics analysis of a high resolution winding type resolver and rotary transformer using FEM (Finite Element Method). The rotary transformer boosts the input voltage to a high voltage which can be input into the rotor windings of the resolver. Through multi-physics models of the transformer and resolver, the characteristics of the output signals for the resolver system with high resolution can be derived. Moreover, the circuit model of the interface part between the transformer and resolver should be considered, because of the calculation of the input current to the resolver. The winding type resolver is composed of 32x and 1x stator windings for high resolution. Then, the output signals of the stator windings, which make sinusoidal SIN and COS waves with a $90^{\circ}$ phase difference, are verified.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.153-160
• /
• 1992

To investigate the potential of paper mill sludge and briquet ash as cultural media in turfgrass, zoysiagrass was grown in the mixtures prepared with paper mill sludge and briquet ash. The mixtures were consisted of sludge and briquet ash in the ratio by volume 3:1, 2:1, 1:1, 1:2, and 1:3 in the order. To compare the growth responses, some plants were grown in the medium containing sand(3), field soil(1) and peatmoss (1) by volume anti regarded as control. 1. Activated sludge mixed with sand increased plant height, fresh weight, and dry weight more than 1.5-2.0 times compared to those of the control. The highest plant growth was shown in mixtures containing 67% activated sludge. 2. Plant density per $100cm^2$ and chlorophyll content were higher in all mixtures containing activated sludge than control. 3. The growth of zoysiagrass was reduced along with the increase of non-activated sludge ratio, but no difference was found in chlorophyll content. 4. Plant height, fresh weight and dry weight were greater in activated sludge combined with sand compared to the briquet ash mixtures, but the difference of shoot density between two mixtures was not shown. 5. Even though non-activated sludge appeared not to be appropriate to the growth of seedlings, the number of tillers of plant propagated with rhizome was more increased compared to control when briquet ash content was less than 75%.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.61-66
• /
• 2004

To investigate the effect of charcoal on the physico-chemical characteristics in the growing media and the growth of oriental melon, six treatment, 0%, 10%, 20%, 30%, 40%, and 50% charcoal, were added into the growing media, Baroker. The value of pH in the charcoal contained growing media (CGM) was recorded higher and further increased by raising the charcoal ratio and by growing period. In 20% CGM, the range of pH was adequate to grow crop as 5.2${\sim}$5.8. Contents of Ca and K in CGM increased by raising the ratio of charcoal, while contents of Mg and Na decreased. The growth of oriental melon seedlings in 20% and 30% CGM was better than in other treatments, in terms of fresh and dry weight of shoot, plant height, leaf area, lear width and relative growth rate. Both the physico-chemical properties of growing media and the growth of oriental melon seedlings were changed by the addition of charcoal. These results suggest that charcoal can be used as mixing material with other potting media for producing the seedling of good quality.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.67-74
• /
• 2014

In this study, a constant rate of strain test (CRS) and oedometer test was performed in order to study the consolidation characteristics to the liquid limit using a re-shaped clay which was preconsolidated at a constant pressure. Consolidation samples were made of kaolinite which was mixed with bentonite of 6 %, 9 %, 12 % and 15 % of it by weight and the test value of liquid limit of samples were appeared in 77 %, 84 %, 88 % and 91 % respectively. And then consolidation samples which were agitated sufficiently adding distilled water 2 times of liquid limit were preconsolidated in the condition of a constant pressure of 0.2 MPa. The oedometer test which is commonly used recently and the consolidation test of constant rate of strain which were applied in 0.001 %/min, 0.004 %/min, 0.01 %/min rate of strain according to ASTM, D4186-82 were performed and the preconsolidation pressures were compared and analyzed at 0.2 MPa preconsolidated pressure. As a result, in the case of low value of liquid limit, preconsolidation pressure was appeared same as 0.2 MPa preconsolidated pressure at the high speed strain rate, and in the case of high value of liquid limit, preconsolidation pressure was appeared same as 0.2 MPa preconsolidated pressure at the low speed strain rate.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.3
• /
• pp.121-129
• /
• 2011

The effects of the applied current density, the $AgNO_3$ concentration, the scrubbing liquid flow rate and the NO-air mixed gas flow rate on the NO removal efficiency were investigated by using $Ag^{2+}$ mediated electrochemical oxidation (MEO). Results showed that the NO removal efficiency increased with increasing the applied current density. The effect of the $AgNO_3$ concentration on the NO removal efficiency was negligibly small in the concentration of $AgNO_3$ above 0.1 M. When the scrubbing liquid flow rate increased, the NO removal efficiency was gradually increased. On the other hands, the NO removal efficiency decreased with increasing the NO-air mixed gas flow rate. As a result of the treatment of NO-air mixed gas by using the MEO process with the optimum operating condition and the chemical absorption process using 3 M $HNO_3$ solution as a scrubbing liquid, the removal efficiency of NO and $NO_x$ was achieved as 95% and 63%, respectively.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.23-28
• /
• 2009

This study was conducted to evaluate the effect of optimized environment conditions with growth stage in photoautotrophic micropropagation on the growth of potato (Solanum tuberosum L. cv. Dejima) plantlets and energy efficiency. Optimum environment conditions at each stage were decided in our previous study. For the evaluation of optimized environment control, potato plantlets were cultured under four different conditions: photoautotrophic optimum conditions of photosynthetic photon flux density (PPFD) and $CO_2$ levels with growth stage (POG), photoautotrophic constant condition with average PPFD and $CO_2$ levels (PCA), photoauototrophic constant condition with maximum PPFD and $CO_2$ levels (PCM), and photomixotrophic conventional condition with 3% sucrose (PMC) as control. As a result, environment control with growth stage (POG) significantly promoted all the growth characteristics such as the number of nodes and unfolded leaves, shoot height, shoot diameter, and fresh and dry weights of potato grown in vitro. In addition, based on dry weight consumed electricity and $CO_2$ were the lowest in POG suggesting the highest energy efficiency among the treatments. After transferring potato plantlets to greenhouse, the plantlets under POG showed vigorous growth, which was pretty similar with those under PMC. The accumulations of dry matter in POG were 4.7 times in vitro and 3.8 times in greenhouse as much as those in the conventional control (PCM). Thus, we concluded that in vitro environment control with growth stage induced vigorous growth of potato plantlets both in vitro and in greenhouse with less energy consumption.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.864-870
• /
• 2018

The effect of lower bed height on the collapse velocity was investigated for a two-stage bubbling fluidizedbed (0.1 m in diameter, 1.2 m high) connected with a standpipe (0.025 m in diameter) for solid transport. Air was used as fluidizing gas and mixture of coarse (< $1000{\mu}m$ in diameter and $3625kg/m^3$ in apparent density) and fine (< $147{\mu}m$ in diameter and $4079kg/m^3$ in apparent density) particles as solid particles. Mixing ratio of fine particles, height of the lower bed and the distributor of the upper bed were considered as experimental variables. The collapse velocity increased with static height of the lower bed. However, the effect decreased as the mixing ratio of fine particles increased. The effect seemed to be attributed to the increase in height of the dense layer of coarse particles that prevented the gas from flowing into the standpipe, not in pressure drop for the standpipe, as the bed height increased. The collapse velocity decreased a little as the pressure drop of the distributor of the upper bed increased. An improved correlation was proposed for predicting the collapse velocity.