• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.198-201
• /
• 2010

지형이 불규칙한 자연하천에 대해 2차원 격자를 구성할 경우, 사각형 격자만을 사용한다면 지류와 본류의 합류부분에서 격자의 처리가 어려운 문제가 발생할 수 있으며, 삼각형 격자만을 사용하여 지형을 처리한다면 격자수가 많아져 계산시간이 다소 많이 소요되는 어려움이 존재할 수 있다. 혼합격자의 적용이 가능하다면 이러한 어려움은 어느정도 극복할 수 있다. 본 연구에서는 1차정확도 기법인 HLLC 기법을 적용하고, 지형이 복잡한 자연하천에 대한 격자처리의 유연성을 위해 삼각형 및 사각형 격자 그리고 이 두 격자가 혼용된 혼합격자의 적용이 가능한 2차원 유한체적모형을 개발하였다. 그리고 개발모형을 수리모형 실험을 통해 얻어진 실험자료가 존재하는 실험하도 및 실제 자연하천에서의 댐 붕괴에 대해 적용하여 결과를 비교하였다.

• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.109-123
• /
• 2011

In this study, 2D finite volume model, which can apply to the mixed meshes that is effective to treat the complicated topography such as a natural river, is developed. To do so, an algorithm for finding the neighbouring cell of a computational cell is introduced, and fluxes are computed using the HLLC approximate Riemann solver at each interface between a computational cell and it's neighbouring cells. Moreover, in order to numerically treat the bed slope which has important effect on the balance between flux gradients and sourte terms, different formula to compute the bed slope for rectangular and triangular mesh are applied. The developed model is applied to analyze dam-break in an experimental channel with $90^{\circ}$ bend and Malpasset dam-break in France. The two cases consist of mixed meshes and the suggested method is validated for the experimental channel and natural channel by comparison with the experimental data, field data and computed results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.157-164
• /
• 2016

The performance of convective heat transfer in rod bundle flow was experimentally evaluated using a twist-vane spacer grid. A $4{\times}4$ square-arrayed rod bundle was prepared as the test section, with a pitch-to-diameter ratio(P/D) of ~1.35. To check the convective heat transfer performance, the circumferential and longitudinal variations in rod-wall temperatures were measured downstream of the twist-vane spacer grid. In the circumferential measurements, the rod-wall temperature toward the twist-vane tip showed the lowest value, which might be due to the deflected water flow caused by the twist-vane. On the other hand, the wall temperature of the longitudinal measurements near the twist-vane spacer grid decreased dramatically, which implies that the convective heat transfer performance was enhanced. A heat transfer enhancement of ~35 % was achieved near downstream of the twist-vane spacer grid, as compared with the upstream value. Based on the present experimental data, a correlation for predicting the heat transfer performance of a twist-vane spacer grid was proposed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.273-273
• /
• 2022

혼합층(Mixed layer)은 온도가 일정한 수심층으로, 해수표면에 작용하는 바람의 영향으로 인하여 해수가 위아래로 섞여 형성된다. 이러한 혼합층은 영양염의 순환과 산소의 공급 등과 함께 일차생산량을 결정하는 중요한 요인이 될 수 있으며 혼합층 두께의 변동은 양식 산업에 영향을 미칠 수 있다. 최근에는 기후변화로 인한 해수면 상승 및 해수온 상승 등이 지속되고 있으며, 이러한 현상은 해양생태계의 변화를 초래하여 수산업의 피해를 유발할 수 있다(강원연구원, 2017). 이에 국립수산과학원, 기상청, 국립해양조사원 등 유관기관에서는 정선해양 수온 관측 및 해수순환모델을 이용하여 혼합층의 분석을 수행하고 있으나 격자 구축 및 초기·경계장 설정의 한계가 존재하여 정밀하고 정확한 혼합층 분석에는 어려움이 있다. 이에 본 연구에서는 비정형격자를 사용하여 격자 구축에 제약이 없는 SCHISM (Semi-implicit Cross-scale Hydroscience Integrated System Model)을 이용하여 우리나라 연안해역의 계절변화 및 기후변동성에 따른 혼합층 두께의 변화를 검토하고자 한다. 연구대상지는 서해·동해·남해를 포함한 우리나라 전체 연안 해역(위도: 32°N ~ 39°N, 경도: 124°E ~ 132°E)으로 선정하였으며, 격자크기 100 ~ 3,000 m인 삼각격자로 격자를 구축하였다. 혼합층을 분석하기 위하여 수직격자 층은 50층으로 SZ(Sigma Z coordinate system)좌표계를 사용하였다. 초기·경계장은 FES(Finite Element Solution)2014, HYCOM(Hybrid Coordinate Ocean Model) 및 대기모델 결과를 이용하여 설정하였다. 수치모형 검증을 위하여 수온관측소에서 수심별 측정한 수온 값과 SCHISM 결과 값을 비교하였고, 상대오차가 약 10% 이내로 나타나 모형의 정확도를 확인하였다. 최종적으로 해수면 상승 및 해수온 상승 시나리오를 고려하여 계절별 연안해역의 혼합층 두께의 변화 양상에 대하여 검토하였다. 향후에는 보다 정밀한 대기모델과의 혼합모형 구축 및 다양한 수심 별 관측자료를 활용한다면 실무에서 적용 가능한 혼합층 분석 및 수산업 피해 발생 지역에 대한 피해저감 대책 수립이 가능할 것으로 판단된다.

• Journal of the Korean Chemical Society
• /
• v.66 no.4
• /
• pp.278-283
• /
• 2022

Using the Kirkwood's method, the free energy of a binary lattice solution consisting of two identical interpenetrating sublattices, such as a simple cubic lattice or a body-centered cubic lattice, was calculated up to the tenth order of the reciprocal of absolute temperature. Using this, liquid-liquid coexistence curves and critical solution temperatures for the binary lattice solutions were calculated to quantitatively investigate the effect of non-random mixing of molecules. And it was shown that the coexistence curve of the simple cubic lattice solution was in good agreement with the Monte-Carlo computer simulation result.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.53-62
• /
• 2017

The forced convection heat transfer performance of a twist-vane spacer grid for a dual-cooled annular fuel assembly was examined experimentally. The twist-vane spacer grid was uniquely designed to enhance mixing inside subchannels and mixing between adjacent subchannels. For testing, a $4{\times}4$ square-arrayed rod bundle with narrow gaps between rods was prepared as the dual-cooled annular fuel assembly to be simulated. The pitch-to-rod diameter ratio of simulated dual-cooled annular fuel assembly was 1.08. The experiments were performed under the following conditions: axial bulk velocity, 1.5 m/s and heat flux, $26kW/m^2$. With regard to the circumferential temperature distribution, the lowest rod-wall temperatures upstream and downstream were measured at the subchannel center and the position toward the tip of twist-vane, respectively. With regard to the axial temperature distribution, behind the twist-vane spacer grid, the rod-wall temperature decreased drastically, and the Nusselt number was enhanced by up to 56 %. The present measured data indicate that the twist-vane spacer grid can effectively improve the forced convection heat transfer in the dual-cooled annular fuel assembly with narrow gaps.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.112-115
• /
• 2009

In this paper, flow simulation algorithms for utilizing unstructured hybrid meshes are introduced. First, various types of meshes are introduced. Advantages and disadvantages of each type of meshes are discussed. Unstructured hybrid mesh approach, that is best suited for high speed viscous flow simulation, is presented. Lastly, various types of flow simulations using unstructured hybrid meshes are introduced.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.663-670
• /
• 2009

Performing random number simulations, we obtained an approximate distribution of the number of ways arranging molecules in a binary lattice solution of nonrandom mixing with a specific interaction. From the distribution an approximate equation of excess Gibbs energy for a binary lattice solution was derived. Using the equation, liquid-vapor equilibrium at constant pressure for 15 binary solutions were calculated and compared with the result from Wilson equation, Van Laar equation and Redlich-Kister equation.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.294-301
• /
• 2011

A two-dimensional hybrid flaw solver has been developed for the accurate and efficient simulation of steady and unsteady flaw fields. The flow solver was cast to accommodate two different topologies of computational meshes. Triangular meshes are adopted in the near-body region such that complex geometric configurations can be easily modeled, while adaptive Cartesian meshes are, utilized in the off-body region to resolve the flaw more accurately with less numerical dissipation by adopting a spatially high-order accurate scheme and solution-adaptive mesh refinement technique. A chimera mesh technique has been employed to link the two flow regimes adopting each mesh topology. Validations were made for the unsteady inviscid vol1ex convection am the unsteady turbulent flaws over an NACA0012 airfoil, and the results were compared with experimental and other computational results.

• Nuclear Engineering and Technology
• /
• v.28 no.1
• /
• pp.56-71
• /
• 1996

The local hydrulic characteristics in subchannels of 5$\times$5 nuclear fuel bundles with spacer grids were measured at upstream and downstream of the spacer grid for the investigation of the spacer grid effects on turbulent flow structure by using an LDV(Laser Doppler Velocimeter). The measured parameters are axial velocity and turbulent intensity, skewness factor, and flatness factor. Pressure drops were also measured to evaluate the loss coefficient for the spacer grid and the friction factor for rod bundles. From these data, it was found that the turbulent mixing and forced mixing occur up to $x/D^h=10$ and 20 from the spacer grid, respectively. The turbulence decay behind spacer grid behaves in the similar decay rate as turbulent flow through mesh grids or screens. Mixing factors useful in subchannel analysis code were correlated from the data and show the highest value near spacer grid and then have a stable values.