• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.91-96
• /
• 2010

The purpose of this study is to find problems about pedestrian road of tourist resort and to make new type of sidewalk pavement with wood chip and binder using urethane resin on the parks and tourist resort. The wood chip pavement has new economics and durability with comfortable texture. Samples of these pavement materials were tested for tensile strength, permeability and ball rebound value. Also, after immersion for 24 hours, tensile strength, samples' thickness and weight were measured and discussed the strength reduction according to the water immersion. Tensile strength experimentation was examined on dry condition and water immersion. The result of examination on dry condition was 1.06MPa and on water immersion was 0.67MPa. The results showed 36.8% decreasing rate of tensile strength. Permeability experiment test based on field permeability method of pavement were conducted as a result, permeability coefficients were in the range of 0.67~0.78mm/s that all exceeds object permeability coefficient. Elasticity experiment was based on elasticity test method of Japan road association. GB coefficient was 21% and SB coefficient was 10%. GB coefficient and SB coefficient increased if fine aggregate were increased.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.893-905
• /
• 2011

CUPPS is the latest international standard passenger processing system which is operated with airlines' check-in system, DCS (Departure Control System) in order to provide check-in and boarding services to passengers. The CUPPS standard has been revised in August 2009 leading by IATA (International Air Transport Association) who recommends replacing old legacy common use system with CUPPS to airports and airlines around the world. IATA is expecting to reduce the installation and maintenance cost of CUPPS by standardizing various legacy common use systems and device controls. Airlines are also expecting to take advantage of the system to reduce the application development cost as developing only one standard CUPPS application instead of developing multiple applications for nonstandard legacy systems. This research which focuses on development completed AIRCUS, R&D project of ministry of land, transport and maritime affairs accomplished by IIA, will present the result of pilot trial and the effective approach methods to increase the possibility of expanding overseas business by comparing old legacy system with CUPPS to prove the dominance of CUPPS over the legacy systems as well as doing foreign case studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.171-179
• /
• 2018

In order to ensure the interoperability of products and technologies, companies apply standard technology in R&D but encounter various obstacles in this process, which they try to overcome through active standardization activities. Various studies have investigated the obstacles and coping strategies of companies in the R&D process. However, studies on the obstacles and coping strategies in the standardization process are insufficient, and the types of obstacles related to standardization, so a variety of studies are also needed on the types of activities. In this study, we tried to determine the types of obstacles related to standardization and to examine how these obstacles affect the standardization activities of companies. The analysis used the data from the 'National Standards Survey' which was conducted by the Korean Standards Association in Korea for companies engaged in the electrical, electronic, and information-related fields in Korea. The relationship between standard-related difficulties, needs and standardization activities was verified through structural equation modeling. The analysis results revealed that the standards-related disability issues have some influence on the standardization activities and the mediating effect by the necessity of the standard was investigated. We also found that many companies are making various efforts to overcome the barriers caused by standard activities. This suggests that a company can build a virtuous cycle structure by performing strategic actions to overcome obstacles by standardization activity and reducing the obstacles caused by standard-related research and development.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1226-1232
• /
• 2004

Biometric authentication is rising technology for the security market of the next generation. But most of biometric systems are developed using only one of various biological features. Recently, there is a vigorous research for the standardization of various biometric systems. In this paper, we propose a web-based authentication system using three other verifiers based on functional, parametric, and structural approaches for one biometrics of handwritten signature, which is conformable to a specification of BioAPI introduced by BioAPI Consortium for a standardization of biometric technology. This system is developed with a client-server structure, and clients and servers consist of three layers according to the BioAPI structure. The proposed neb-based multiple authentication system of one biometrics can be used to highly increase confidence degree of authentication without additional several biological measurements, although rejection rate is a little increased. That is, the false accept rate(FAR) decreases on the scale of about 1:40,000, although false reject rate(FRR) increases about 2.7 times in the case of combining above three signature verifiers. So the proposed approach can be used as an effective identification method on the internet of an open network. Also, it can be easily extended to a security system using multimodal biometrics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.153-162
• /
• 2016

The aim of this study was to estimate the prevalence of the metabolic syndrome risk factors for adults in the general population, understand the relationship of each factor with the obesity indicators, and examine the relevance and validity for predicting the metabolic syndrome in obese indicators. The study subjects were 1,051 adults aged 20 years and over, who underwent a health package check-up at the Korea Association of Health Promotion, D-branch from Feb. to Nov. 2014. As a result, the prevalence rates of metabolic syndrome of the study subjects were 21.5%, and the prevalence rates of the metabolic risk factors were as follows: 31.8% of men and 41.6% of women for abdominal obesity; 35.6% of men and 17.3% of women for TG; 17.6% of men and 34.2% of women for HDL-C; 53.5% of men and 35.9% of women for blood pressure; and 14.9% of men and 6.8% of women for FBS. The prevalence rates of metabolic syndrome were significantly higher in the older age group, in the group with the higher BMI, and in the group of higher level of drinking frequency. In the predictive indicators of obesity on metabolic syndrome risk factors, the waist / height ratio was higher than other indicators. Conclusively, WHtR appeared to be a useful indicator to show abdominal obesity and is better in selecting metabolic syndrome patients compared to other obesity indicators.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.390-402
• /
• 2014

This study, based upon the Sturges' crisis stages, examines the crisis response communication strategies of Korea Professional Football League(KPFL) for the K-league match-fixing case as well as the frequency of related news articles and the source of information. To explore the crisis response communication strategies the Korea Professional Football League used, a total of 118 news articles were analyzed using the content analysis and frequency analysis. The unit of analysis for crisis response communication strategies is sentence. The frequency of news articles based upon the crisis stages shows highest rate at the acute crisis stage. The source of information for news reports shows that KPFL was one of the major sources of the news reports. KPFL's crisis response communication strategy throughout all stages of the crisis stage shows that corrective action strategy was used highest ratio. In particular, the crisis response communication strategy between team, player and KPFL was shown lack of consistency throughout all crisis stages. Implication and future research direction for the results are discussed.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.175-184
• /
• 2005

With the rapid progress of the aging society in Korea, the silver generation is emerging as another class of users in the new population structure. This is a social issue to be dealt with, and the effect of such a change is being observed dearly in the design area. In addition, there are increasing demands for consideration of minor groups of users including the elderly, the disabled, the left-handed, children and pregnant women and nursing mothers, who have been treated as the weak. Such a human-centered idea may be the manifestation of the recovery of humanity and the self-realization of human beings through experiences and reflections of the industrial society of the past. The present study examined the tendency of design standardization centering on universal design, which has emerged in response to user-centered social needs, and suggested general considerations for the necessity of introducing such standards. These days the meanings of standardization are not limited to quality, performance, safety and economic aspect. Standardization is required to consider the diversity and the welfare of human beings. In addition, one of the important functions of standardization is to provide designers with important clues and guidelines for designing. In reality, however, standardization has been rejected by the circle of design for the reason that it deters free creation, so research on the introduction of standardization has been at standstill. As ISO/IEC Guide71 was published in November 2001, based on which, the Korea Standards Association established KS A ISO/IEC Guide71 without changing its contents. In companies' manufacturing activities, the progress of standardization in connection to universal design is growing more important. However, usefulness and interchangeability for the absolute majority resulting from standardization are incomparable. Lastly, the realization of universal design requires human-centered design mind, based on users' experiences and needs, the characteristics of the human bodies and inconvenient elements rather than standards for the sake of standardization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.183-193
• /
• 2018

The purpose of this study was to assess the implications for Daejeon's business management by analyzing the impact on the management performance of human solidarity among CEOs of small and medium venture companies in Daejeon. From 20th March to 20th May 2018, 212 questionnaires were collected from CEOs of small and medium-sized venture companies in Daejeon for this study and verified using the SPSS statistics Analysis Program. As a result, the study confirmed that the "work" and "school" connection factors have positive effects on securing government projects, improving business management, acquiring the necessary information for business growth, and securing competitiveness in 4th industrial revolution era. On the other hand, the "Region or Kin-group" connection factor does not affect the management performance. The following implications were derived fromthese studies on sustainable growth and development of business in Daejeon. First, it requires a higher level of the CEO solidarity. Second, efforts aimed at building mutual trust among CEOs in Daejeon are needed to develop close relationships and strong connections. Third, each operating association established in Daejeon needs to develop various programs for building relationships among CEOs and operate programs to increase the chances of contact.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.509-525
• /
• 2017

This study analyzed a unique method of problem-handling, attitudes, and specific interest propensity in the career path of the type with inconsistency in the relative distance between personality type in Holland's hexagonal model. In-depth interviews and theme analysis with six clients who showed inconsistent personality type were conducted. These six were selected from 87 participants that had received training at the Korea Vocational Counselling Association, Korea Training Institute for Self-Sufficiency and Korea Employment Agency for the Disabled. From the analysis, the six clients with inconsistent 3 Codes showed four characteristics - more than three career experience, various interest pursuits, career involvement, and career identity. They were affected in their vocational behavior by their own Holland 3 Codes and showed vocational behavior very different from Holland's theory of person-environment fit approach. They showed positive, ambivalent and chaotic types on career identity. Furthermore, Conventional(C)-Investigative(I)-Social(S) 3 Codes type and Artistic(A)-Enterprising(E)-Realistic(R) 3 Codes type in the same inconsistent personality type showed different vocational behaviors in career path development, which relates to the meaning of Holland's 3 Codes. The significance of this research lies in its provision of various points for improving career counselling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.585-591
• /
• 2020

In accordance with the government's expansion of solar power generation, the installation of solar panels is expected to expand in Korea. On the other hand, policy discussions on the establishment of a domestic post-management system for waste from photovoltaic power are insufficient. This study estimated the benefit-cost of solar PV Panel recycling and derived the implications for the photovoltaic waste policies in Korea. Overall, the profitability of the recycling project is very low when the project execution period is 10 years. On the other hand, the economic efficiency of the project can be sufficiently high when the duration of the solar panel recycling project is extended to 20 years. In the short term, it is challenging to expect voluntary companies to enter this recycling business because of low economic efficiency. Therefore, it is necessary to prepare various policies to improve the economic efficiency of the recycling business. In conclusion, the following policy implications for PV panel recycling activation are proposed: i) legislation for the recycling of waste solar photovoltaic panel, ii) designation of Association for Solar Panel waste monitoring, and iii) expansion of R & D and the development of various business models related to solar recycling.