• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.60-67
• /
• 2021

According to the 「Guidelines of Structural Design for Piloti Building」 of the Ministry of Land, Infrastructure and Transport (2018), the natural period of middle and low rise building of upper-walled lower frame type, such as the domestic multiplex house in piloti style, is suggested for safety to apply the existing code formula of the wall structure. However, the current code formula of the wall structure was provided based on actual measurement of high-rise wall-type structures that mainly exhibit bending behavior. So it is considered that it is not suitable for a piloti-type house with four stories or less, where the wall behaves in shear. See also Park et al. (2000) confirmed that the effect of the lower frame part is greater than that of the upper wall part in the natural period of complex structures with 10 or more floors through analytical studies. Therefore, in this study, in order to examine the effect of the lower frame on the natural period of the middle and low-rise piloti structure, the estimation of natural period by the finite element analysis, approximation formula and ccurrent code formula was performed for the target structures with the shear and flexural stiffness of the upper wall and the shear stiffness of the lower frame as variables. As result, it was found that the change in the shear stiffness of the lower frame had a greater effect on the natural period of the whole building than the change in the bending or shear stiffness of the upper wall.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.292-300
• /
• 2011

The construction industry in Korea has seen significant improvements in quality management techniques, driven by the dramatic development of new technology through Manhattanization and enlargements, but compared with technical development, the level of building quality improvement is still lagging behind. In the meantime, as the interest in construction quality soars due to changes in user consciousness, the level of quality that is being demanded is rising. The government has reinforced quality systems by implementing responsible supervision requirements and granting overseas companies permission to enter the supervision business in Korea, and private sector companies also are attempting quality improvement through quality assurance approaches like the preliminary qualification screening system and ISO 9000 series. But currently, building constructions are done only according to the construction specifications of project owners, whose design, materials and construction methods are already decided, and do not leave any necessity or opportunity for technical developments for the quality improvement of contractors. Therefore, in this study, a work process and system improvement plan for payment regulations is proposed, with which contractors can secure quality voluntarily in the building construction phase.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.6
• /
• pp.659-669
• /
• 2013

The purpose of this study is to investigate the ultimate strength and curling influence using finite element analysis based on the previous test results of ferritic stainless steel bolted connections. Results obtained from finite element analysis (FEA) were compared with those of test results and the validity of numerical modeling was verified. The conditions of curing occurrence for edge/end distance were investigated and ultimate strength reduction ratio caused by curling was estimated quantitatively. Moreover, the ultimate behaviors such as fracture mode and ultimate strength by FEA were compared with those predicted by current design specifications such as AISC, KBC2009, AIJ and AISI.

• 산림경영
• /
• s.139
• /
• pp.20-23
• /
• 1999

산림청에서는 백두대간을 체계적으로 보전하고 골프장 설치등으로 산림이 무분별하게 훼손되는 일이 없도록 하기 위하여 '산림피해 확대방지 종합대책'을 수립$\cdot$시행한다고 밝혔다. 산림청은 그동안 많은 논란이 있었던 백두대간의 실체규명과 보전을 위하여 백두대간의 개념 및 보전에 필요한 사항 등을 2000년중으로 정립, 제도화하는 방안을 강구키로 하였다. 또한 건설교통부가 국토이용계획을 변경하고자 산림청과 협의할 때 적용하는 산림청의 '국토이용계획변경 협의기준'을 강화하는 내용으로 금년 하반기에 개정하기로 하였다. 스키장$\cdot$골프장 등 설치로 백두대간이 훼손되지 않도록 백두대간 마루금 침범을 금지하는 내용으로 개정하고 집단묘지개발시 피해유발 우려가 있는 경사 30$\%$이상지역, 마사토지역과 경관지역은 묘지개발을 금지하게 할 계획이다. 또한 무분별한 산림형질변경을 제도적으로 방지하기 위하여 현행 시장$\cdot$군수로 되어 있는 산림형질변경허가권자를 시$\cdot$도지사로 상향하는 내용으로 금년중 산림법 시행령을 개정하기로 하였다고 밝혔다. 특히 각종 개발사업 추진과정에서 장마철 집중호우로 인한 수해가 발생하지 않도록 하기 위하여 1년 이상 공사중단된 골프장은 6월중에 일제조사를 실시하여 장마철 집중호우시 수해위험에 있는 골프장에 대하여는 시$\cdot$도지사에게 요청하여 사업승인을 취소하거나 사업중지토록 할 계획이다. 산림경영 기반시설인 임도에 대하여는 피해방지 및 경관유지를 최우선하는 '환경친화적 녹색임도' 정책으로 전환하기 위하여 기존의 부실 임도에 대하여는 7월부터 대대적인 구조개량 사업에 착수하고, 내년부터는 임도계획 단계부터 노선등의 적정여부를 사전평가하는 제도를 도입하겠다고 밝혔다. 최근 산림훼손으로 문제되고 있는 송전탑진입로는 산림 형질변경허가를 엄격하게 운용하기 위하여 앞으로는 한국전력으로 하여금 진입로 설치 대신 삭도$\cdot$모노레일$\cdot$헬기운반을 대폭 확대하도록 조치하였으며 또한 이미 공사완료한 곳 중 피해방지$\cdot$경관유지가 필요한 경우에는 한국전력으로 하여금 설계를 변경하여 추가공사를 하도록 협의완료하였다고 산림청은 밝혔다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.340-350
• /
• 2016

The Medical Service Act of Korea describes a clinic as providing services primarily to outpatients, while a large general hospital provides specialized medical services requiring a high level of expertise for treating serious diseases. The portion of medical revenue for clinics has been decreasing gradually compared with large hospitals. This article proposes two fundamental medical policies to fix the distorted medical delivery system of Korea. Firstly, uniform additional medical remuneration rates based on the type of medial institution should be divided into outpatient additional rates and inpatient additional rates. Secondly, to normalize the function of clinics and large general hospitals, an outpatient medical target budget system should be introduced. Finally, to properly implement the proposal, it is important to establish healthcare policy-making governance. The success of policy implementation strongly depends on the participation and incentives of the government, suppliers, and patients. Healthcare policy-making governance must be designed to encompass this fact and improve quality of care.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.98-103
• /
• 2015

Liquefied petroleum gas can be charged up to 85% of cylinder volume by enforcement regulations of safety control and business of liquefied petroleum gas act. The charged mass by enforcement regulations is considered by liquid expansion of internal liquefied petroleum gas at $65^{\circ}C$. But the temperature of liquid would not be suspended under $65^{\circ}C$ in a cylinder or portable vessel at certain situation. In the thermodynamics view point, the cylinder can be exposed to high pressure by liquid expansion. Consequently, it can be possible to potential risk such as physical explosion. Hence, this paper will offer a method of estimated internal pressure by liquid expansion at critical state in the closed system. Also, the structural factor which is given rise to volume increasement of cylinder is offered by experiment. This paper is expected as crucial reference for a cylinder design of liquefied petroleum gas.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.5-10
• /
• 2008

In recent years, the major interest in international environmental laws has focused on the ways to secure observation of the laws. For the implementation and compliance of international marine environmental convention, the new sequence of developing convention has been sdopted. The main convention is adopted in a form of 'Framework Convention' and the details are expressed in the Annex and/or Guidelines of the convention for the purpose of conveniense of adoption and to secure the observation of the convention And the Annexes or Guidelines are amended, revised and newly adopted continuously. Therefore this study is to analyze the tendency of sequence for developing new convention, which will help understanding one particular international marine environmental convention as a whole.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.75-80
• /
• 2008

When a saturated clay is sampled in an undisturbed manner from a bore hole, the sample extends vertically and shrinks horizontally under undrained conditions due to stress release. The conventional consolidation test specimen is trimmed from the expanded sample so that its diameter is equal to the inner diameter of the consolidation test ring, and this test procedure does not reproduce the actual consolidation behavior. The measurement of sample extension was conducted by means of overcoring method showed that the extension strains were 1 to 2%. To simulate the in-situ consolidation behavior, we proposed the consolidation test method that uses a specimen with a slightly smaller diameter than the inside diameter of consolidometer so that the specimen expands laterally to the inside of the ring.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.123-134
• /
• 2009

As the embedded software for weapon system is embossed, the information management system is required to service and manage the technical information of embedded software systematically. But the technical information documents are managed by its own organization separately, it's hard to service the information and share it with anyone who need. In this paper, to manage the embedded software information systematically, we analyze the information management system built in 2004 and the defence law/rule. Also we distinguish the software information from defence laws to manage systematically and analyze the requirements of the information system. Based on these, we suggest implementing the management system to increase efficiency of managing the weapon embedded software information. Through this, we can improve the utilization and reusability of the weapon embedded software.