Proceedings of the Korea Water Resources Association Conference
/
2018.05a
/
pp.266-270
/
2018
원자력 방사능 폐기물 또는 원자력 발전소 해체시 발생 가능한 세슘 이온은 인체뿐만 아니라 생태계 환경에도 큰 악영향을 미친다고 알려져 있다. 이러한 세슘 이온은 자연 속으로 손쉽게 스며들어 발생한 지역뿐만 아니라 쉽게 퍼지게 되어 넓은 지역까지 피해를 주게 되며, 반감기가 30년으로써 한번 자연계에 누출되면 장시간 잔존하여 인간 및 생태계에 악영향을 미치게 된다. 세슘이온이 몸속에 들어오게 되면 장에서 몸으로 100% 흡수되며 내장에 축척되어 연조직 전체에 분포하게 되며 갑상선 암과 같은 심각한 위험에 초래하게 된다. 2011년 발생한 후쿠시마 원전 사고 이후 국내에서도 많은 관심을 가지기 시작하였으며, 따라서 수중의 세슘이온을 제거하기 위하여 나노 입자 형태의 기능성을 가진 물질들을 적용한 많은 연구가 이루어지고 있다. 이러한 나노물질들은 수중의 세슘이온 제거에 대하여 우수한 제거효율을 보여주고 있으나 나노 입자 특성상 사용 이후 회수가 어려워 기능성 물질들의 확산 및 축적에 따른 2차 환경오염의 문제점까지 발생하게 된다. 최근 수처리 분야에서 외부 자기장을 주게 되면 자성을 띄게 되는 물질인 자성체에 대한 관심이 급등하고 있다. 이러한 자성체들은 수중에서 별도의 회수 시스템 없이 자성으로 인하여 완벽히 자기분리 된다. 세슘제거에 탁월한 기능성 물질과 완벽한 자기분리가 가능한 자성체를 결합하여 특별한 회수장치 없이 외부 자기장만 주어진다면 수중의 세슘을 효과적으로 제거 또는 처리할 수 있다. 자성체 입자 표면에 흡착제인 프러시안 블루나 제올라이트와 같은 흡착제를 합성하여 수중의 세슘을 제거하는 연구가 활발히 이루어지고 있다. 그러나 기존의 자성체보다 좀 더 높은 자성을 가지고 있으며 외부 자기장에 의해 강하게 반응을 한다고 알려져 있는 강자성체(Ferromagnetic)를 사용하게 된다면 흡착제와 결합 이후 더욱더 강한 자성을 가진 흡착제가 탄생하며 이를 사용하면 높은 처리율뿐만 아니라 높은 슬러지 회수율을 가질 수 있다. 따라서 본 연구는 흡착제나 이온교환수지와 같은 기능성 물질을 사용하여 수중의 세슘을 제거하는 메커니즘과 강자성체가 가지고 있는 강한 자성의 성질을 결합한 복합체 제조에 대한 연구조사를 중점적으로 실시하였다. 본 연구에 의해 연구 조사된 결과를 바탕으로 수중의 세슘 이온에 대하여 높은 제거효율과 회수율을 가지는 새로운 형태의 복합체 제조에 관한 정보를 제공하고자 한다.
Recovery of indium from secondary sources have been attracting over years not only because of increasing demand together with development of flat panel display industry but also industrial criticality of indium. Applied technology to recover indium for recycling of end-of-life FPD devices can be broadly divided into three major steps, disassembly or dismantling, enrichment or upgrading, and refining or purification. In addition, advanced technology such as zone-refining can be employed for ultra-high purity products. In this mini-review, we present currently applied technologies for recovery of indium and the outlook for total recycling of FDP devices.
The five pieces (Bon 4054, 4074, 4077, 4096 and Bon 4097)of the Central Asia murals housed in the National Museum of Korea were conserved for approximately 2 years. The Central Asia murals conserved for this time have undergone the processes of cleaning, reinforcing pigment layers, facing to protect the pigment layers disassembling, separating wooden frames reinforcing the wall layers, attaching supports to the wall layers, removing facing and making picture frames. They were conserved with emphasis placed on reinforcing the peeled pigment layers and the weakened walls and on improving the structural problem of the exhibit frames.
Cho, Jai Young;Park, Areum;Yun, Hyun Mok;Jun, Yun-Su;Kim, Joon Soo
Resources Recycling
/
v.29
no.4
/
pp.15-30
/
2020
Recently, it is increasing a amount of installed solar-cell rapidly, and end-of-life photovoltaic(ELP) modules are generated in according to the reduction of cell efficiency largely. Recycling of ELP modules are begun at an advanced nation already, but there are bring about environmental contamination and resource recovery problems owing to not treated ELP modules because of economic cost completely. First of all, there were researched basic study for treatment conditions of used solar cell inspection, dismantling of aluminum frame, crushing / grinding & separation of tempered glass, removal of back sheet & EVA film, leaching & precipitation recovery of valuable metals and treatment of waste water. Therefore, we establish optimum conditions through carried out of designed apparatus, installation of equipment, test operation & trouble shooting in scale of 1ton/day pilot plant test. Following to economic review, it does have the economic efficiency until to the case of tempered glass recovery, but does not have the economic value in case of total processes until to recover the valuable metals. However, there are guaranteed economic value if we are gained a large amount of the expenses through EPR supported system. It was confirmed the commercialized possibility of ELP modules recycling if there were established on the collecting ELP modules, reusing criteria, economical technology, enactment of directives and enforcement of EPR supported system efficiently.
This paper tries to study theoretical transformation about modernity by analyzing changes of the concepts of Gaining Knowledge of the Study of Things(格物致知). Gaining Knowledge of the Study of Things(格物致知) was the main concept to explain the thought of Neo-Confucianism(性理學). But in the Modern era Gaining Knowledge of the Study of Things(格物致知) was understood as the meaning of Science. In Neo-Confucianism(性理學) Gaining Knowledge of the Study of Things(格物致知) was closely related to the side of human duty and the moral value judgement. But in the modern meaning Gaining Knowledge of the Study of Things(格物致知: Science) was focused to scientific study of the objective matter. So the Science on Gaining Knowledge of the Study of Things(格物致知學) effect to breakup the thinking of Neo-Confucianism(性理學).
This article tries to compare exchange relations between welfare and dictatorship in the East Germany and the North Korea. Unlike capitalist welfare aiming at correcting market results socialist welfare has been proposed to satisfy people's basic needs, but it had operated as instrument of dictatorship. Relation between welfare and dictatorship could be distinguished as hard exchange and soft one in line with social construction of welfare. Welfare-dictatorship relation in East Germany had developed from its formation(1949-1970s), crisis(1980s) and dissolution(1989-1990). There had established hard exchange relation in which the legitimacy of dominance had debted to welfare as social rights. While crisis of the exchange relation had been modest in a form of insufficient supply of consumption goods, it was one of the elements of collapse of dictatorship, leading to the unification with West Germany. The journey of the exchange relation in North Korea can be characterized by its formation(1948-1980), crisis(1990s-2000s), and transformation(2010s). Unlike East Germany, welfare was socially constructed as gift form the ruler to the ruled, which made the combination of welfare and dictatorship loosely coupled. Although economic crisis was severe compared to East German one the rulers have succeeded maintaining dictatorial dominance by creating dual exchange relation. They separated core group and subordinated one supporting the former at the expense of the latter. They blocked out most of the people from soft exchange relation making bad use of muddling-through life style dependent on market activities. This strategy led to a 'dictatorship neutral welfare extinction'. Taking the high degree of institutionalization of newly establishing welfare-dictatorship relation into account, lives of most people are hardly expected to be improved by gift by their rulers even if North Korean economy will recover in the future.
Dave Montellano Osabel;Hyeong-Jin Choi;Sang-Hoon Kim;Young-Ju Kim;Jae-Hoon Bae
Journal of the Computational Structural Engineering Institute of Korea
/
v.37
no.4
/
pp.275-282
/
2024
A recently proposed rapid-disassembly , carbon-minimized dismantle connection was tested using cyclic loading. To better understand the behavior of the test specimen, three-dimensional finite element (3D-FE) analyses were conducted using a "tied model" (bolted contact surfaces are tied together) and a "bolt-slip model" (contact surfaces slip and separate). The tied model suggests that plastic hinging of the beam occurs if the proposed connection behaves rigidly. The bolt-slip model suggests that the proposed connection, if manufactured and assembled properly, can dissipate energy to about 0.5 times that experienced by a rigid connection. However, when compared in a test, its moment-rotation hysteresis curve does not match well, which suggests that the low performance of the test specimen is attributable to a manufacturing deficiency. Regardless, the results corroborate the pinching phenomenon observed in the experimental hysteresis and fracture failure of the test specimen.
The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO4·2H2O) and bone meal(Ca10 (PO4)6(OH)2) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.
The current research investigates the strategies for fostering service industries from the service's nature perspectives. Because the service industry is broad and heterogeneous in nature, if service's nature is not considered in building strategies for developing service industries, it would have a limited perspective, and thus, it would be difficult to foster large growth in service industries. In addition, not considering service's nature would not encourage synergy among service sectors nor encourage innovative development among individual sectors. Therefore, we need to understand that different service sectors are all under the umbrella for service industries, and consider the service's nature. The current research considers the service's relational, bidirectional, horizontality, and harmonization nature of services, and also, intangibility, inseparability, heterogeneity, perishability were considered in suggesting strategies for fostering service industries. These results can be used to developing governmental policies for developing service industries.
This paper finds that the ultimate source of problems facing Korean mobile telecommunications such as excessive subsidies of handsets, waste of resources, and a vicious circle of expensive handsets and high prices for services, is bundling of handset and subscription. The analysis suggests that bundling causes consumers to confuse about prices of handsets and services, and firms focus on handset subsidy competition rather than on upgrading service qualities and lowering prices due to anti-competitive effects of bundling. Because most of the cost of bundling is passed on to consumers, the welfare of consumers decline. In particular, equality among consumers worsens due to price discriminations. To resolve these problems, unbundling of handset and subscription is a necessity. Mixed bundling allowing separate selling of handsets under bundling does not seem to work as a cure because bundling tends to be a dominant strategy. The best regulatory policy is a complete separation of handset and subscription.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.