• Proceedings of the Korea Association of Information Systems Conference
• /
• 1996.11a
• /
• pp.103-109
• /
• 1996

The GTD-MM hybrid technique, which is used for analyzing elctromagnetic scattering problems of infinite scatterer or scatterers having no analytic solutions, requires knowledges about the diffracted current by the scatterers. And the technique determines the extent of moment method analysis area and the position of GTD matching points empirically. But these parameters give considerable effects to the accuracy of the solution. So we examine the problems and try to seek some practical guidance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.223-229
• /
• 2023

This Paper propose the method that measure main system parameters for PI(proportional-integral) current control of a.c. motor adopting the vector control technique. For current control, the PI control input is could be tuning by several selective methods. Among the several methods, the method that using the main system parameters, wire resistance and inductance, are frequently used. In this study, the technique to dissect and measure these two system parameters through the results of simple feedback control. This analytic measurement method is measuring parameters step by step dissecting the results of P control using simple proportional feedback gain about the unit step or multiple step reference command. This strategy is an real time analytic measurement method that calculate current control gains of torque component and flux component both for vector control of A.C. motor without introducing the further measurement circuits and complex measuring algorithms.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.451-461
• /
• 1998

The solution of anisotropic plate via the classical methods is limited to relatively load and boundary conditions. If these conditions are more complex, the analysis becomes increasingly tedious and even impossible. For many plate problems of considerable practical interest, analytic solutions to the governing differential equations cannot be found. Among the numerical techniques presently available, the finite difference method and the finite element method are powerful numerical methods. The objective of this paper is to compare with each numerical methods for the buckling load and modes of anisotropic composite laminated plates considering shear deformation. In applying numerical methods to solve differential equations of anisotropic plates, this study uses the finite difference method and the finite element method. In determining the eigenvalue by Finite Difference Method, this paper represent good convergence compared with Finite Element Method. Several numerical examples and buckling modes show the effectiveness of various numerical methods and they will give a guides in deciding minimum buckling load and various mode shapes.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.150-161
• /
• 2005

A test was performed to collect the data to validate an analytic method for vent hole sizing on the nose fairing of a launch vehicle. The bake-out chamber at KARI was used to simulate the ambient pressure drop, and pressure difference data were collected for a model with various kinds of vent holes which was installed in the chamber. The characteristics of the test facility and measurement equipments were evaluated for the measurement of the transient behaviors. The measured data were processed in consideration of the characteristics of the facility and equipments, and the effects of vent hole size and configuration on the pressure variation in the model were analyzed based on the data.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.511-521
• /
• 2019

In this study, we theoretically study the acoustic scattering of an obliquely incident plane wave from a finite elastic cylindrical shell. A heuristic scattering method of Ye [Z. Ye, J. Acoust. Soc. Am. 102, 877-884 (1997)] for a finite fluid cylinder is extended into a finite elastic cylindrical shell since no analytic solutions exist in the finite cylinder. The elastic cylindrical shell is modeled with the 3D elastic wave theory considering internal fluid. Using the derived analytic solution, we observe the effect of the internal fluid on the scattering field, the scattering field for the Rayleigh parameter, and the far-field scattering function for the elastic property of the cylindrical shell.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.502-510
• /
• 1994

CDMA technique has been largely focused for Wireless Data Communication and Personal Communication Network. ALOHA protocol also has been proven to be effective for Packet Radio Radio Network regardless of low throughput due to channel collisions. In this paper, we evaluate the performance of MS-CDMA-ALOHA (Mini-Slotted-CDMA-ALOHA) system, by analytic and simulation method. The superiority of the MS-CDMA-ALOHA system over conventional Slotted ALOHA and Slotted-CDMA-ALOHA systems are clearly demonstrated for throughput, delay and stability performances.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.221-230
• /
• 2000

Checking the stability of anisotropic plates with free edges, it is impossible that buckling loads and modes are found via existing classical methods about various loads and boundary conditions. For solving this problems. finite difference method(FDM) is used to analyze the buckling behaviors for arbitrary boundary conditions. Using FDM, it is difficult to treat the fictitious points on free edges. So, this paper analyzes buckling behaviors of analytic models with one edge free and the other edges clamped and with opposite two edges free and other two edges clamped. The various buckling loads and mode characteristics through numerical results are given for buckling behaviors of anisotropic plates on free edges.

• Journal of Korea Water Resources Association
• /
• v.40 no.12
• /
• pp.931-941
• /
• 2007

Traditionally, the decision of river width has aimed majorly at flood control and good river conveyance. And the river width has been decided by practitioner#s subjective and empirical opinion. Recently, however, there is a need for more objective and thus quantitative decision method for decision of river width considering not only economical aspect but also social or environmental aspect. This study adopts the analytic hierarchy process (AHP) to improve the objectiveness in the decision of river width. Criteria and a standardized process are presented for field application. Using the proposed method, one can prioritize various river width and make the optimal decision. We believe that the method can serve as a useful tool for river engineers in practice.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.97-103
• /
• 2005

Recent development of marine magnetic gradient systems, using arrays of sensors, has made it possible to survey large contaminated areas very quickly. However, underwater Unexploded Ordnances (UXO) can be moved by water currents. Because of this mobility, the cleanup process in such situations becomes dynamic rather than static. This implies that detection should occur in near real-time for successful remediation. Therefore, there is a need for a fast interpretation method to rapidly detect signatures of underwater objects in marine magnetic data. In this paper, we present a fast method for location and characterization of underwater UXOs. The approach utilises gradient interpretation techniques (analytic signal and Euler methods) to locate the objects precisely. Then, using an iterative linear least-squares technique, we obtain the magnetization characteristics of the sources. The approach was applied to a theoretical marine magnetic anomaly, with random errors, over a known source. We demonstrate the practical utility of the method using marine magnetic gradient data from Japan.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.25-31
• /
• 1997

현대적 노달방법은 다차원 중성자 확산방정식을 풀기 쉽고 계산시간을 단축시킬 수 있도록 각 방향에 대하여 횡방향으로 적분하여 등가인 차원 수 만큼의 1차원 중성자 확산 방정식을 만들어 풀고 있다 이 과정에서 횡방향 누출 중성자 적분항을 적절히 근사해야함이 필수적인데 이로 인하여 계산의 정확도를 손상하게 될 수가 있다. 이러한 횡방향 누출 중성자 근사를 제거하여 계산의 정확도를 향상시킨 것이 노달 해석함수 전개법(Analytic Function Expansion Nodal Method)이다. 그러나 이 방법은 기존의 노달 방법 보다는 계산시간이 다소 많이 소요되는 단점이 있었다. 본 논문에서는 소격격자 재균형 가속법(Coarse-Mesh Rebalance Acceleration Method)을 노달 해석함수 전개법에 적용하면 계산의 정확도는 그대로 유지되면서도 속도는 크게 향상시킬 수 있음을 보여 준다.