• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.9-16
• /
• 2017

As a preliminary study of enter or leaving traffic patterns of the Korea main port, port Management Information System (Port-MIS) data was used to check the volume of vessels entering and leaving the port of Busan, and three consecutive days from each seasons were selected for study. Selected 12-day General Information Center on Maritime Safety & Security (GICOMS) data was also used to analyze the traffic pattern in the main traffic lane of Busan port for dangerous goods carrier. Also, the distance between dangerous goods carriers and Oryukdo breakwater of east breakwater in the main traffic lane was analyzed. Collision probability was estimated using the cumulative probability distribution function of the normal distribution for the maritime traffic safety audit scheme based on the assumption that a ship's trajectory has a normal distribution for a section of the route. However, in case of entry or leaving thorough the Oryukdo breakwater and entry thorough the east breakwater, ship's sailing trajectories were revealed not to follow a normal distribution via regularity testing using a KS-test and SW-test. Especially in the north port, the tendency of the right side of the ship to pass was remarkable. It is desirable to develop a traffic model suitable for the characteristics of the port rather than to apply general traffic theories, and to apply this model to a maritime traffic safety diagnosis, so further research is needed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.870-874
• /
• 2018

In the worst maritime accidents, people should abandon ship, but ship structures are narrow and complex and operation takes place on rough seas, so escape is not easy. In particular, passengers on cruise ships are untrained and varied, making evacuation prospects worse. In such a case, the evacuation management of the crew plays a very important role. If a rescuer enters a ship at distress and conducts rescue activities, which zones represent the most effective entry should be examined. Generally, crew and rescuers take the shortest route, but if an accident occurs along the shortest route, it is necessary to select the second-best alternative. To solve this situation, this study aims to calculate evacuation routes using Q-Learning of Reinforcement Learning, which is a machine learning technique. Reinforcement learning is one of the most important functions of artificial intelligence and is currently used in many fields. Most evacuation analysis programs developed so far use the shortest path search method. For this reason, this study explored optimal paths using reinforcement learning. In the future, machine learning techniques will be applicable to various marine-related industries for such purposes as the selection of optimal routes for autonomous vessels and risk avoidance.

• 선박안전기술공단연구보고서
• /
• s.4
• /
• pp.1-108
• /
• 2007

2007. 7. 23 IMO의 NAV(항해안전전문위원회)53차 회의에서는 e-Navigation을 해상에서의 안전, 보안, 해양환경보호를 목적으로 전자적인 수단에 의해 선박과 육상에서 해양정보를 수집, 교환, 표시함으로써 항구와 항구간의 항해 및 관련된 서비스를 향상시키는 것으로 정의하고 있다.2005년 11월 영국의 교통부 장관 Stephen 박사는 Royal Institute ofNavigation에서의 연설에서 해상안전과 환경보호를 위하여 선박의 항해를 감시하는 관제소 및 항행하는 선박에 유용하고 정확한 정보가 더 많이 필요함을 역설하였다. 그리고 첨단 기술에 의해 자동화된 항공 항법분야를 예로들면서, 선박의 항법 분야도 항해와 관련된 모든 시설 및 작업을 전자적 수단으로 대체하는 개념인 e-Navigation으로 전환되어야 하며 영국은 이에 필요한 작업을 주도하겠다는 의견을 피력하였다. Stephen은 e-Navigation 도입으로 얻을 수 있는 이익으로 첫째, 항해 실수로 인한 사고 확률저감, 둘째,사고 발생 시 인명 구조 및 피해 확산을 위한 효율적 대응, 셋째, 전통적인항해시설 설치 불필요로 인한 비용 저감, 넷째 선박입출항 수속의 간편화 및항로의 효율적 운용으로 인한 상업적 이익 등을 들었다. 반면에e-Navigation 체계로 전환 시 예상되는 장애로는 첫째, 체계 구축을 위한 비용(특히 개발도상국가들의 경우 어려움 예상), 둘째, e-Navigation의 성과 달성을 위하여 세계 전 해역의 모든 선박이 e-Navigation 체계에 동참하도록유도하는 문제, 셋째, 전자해도 표시 및 선교 장비들에 대한 표준화 문제, 넷째, 육상에 설치할 e-Navigation 센터의 설계 및 구축 등을 꼽았다.IMO는 2005년 81차 MSC(해사안전위원회) 회의에서 영국이 일본, 마샬아일랜드, 네덜란드, 노르웨이, 싱가포르, 미국과 공동으로 제안한 ‘e-Navigation전략 개발’ 의제를 2006년 82차 MSC 회의에서 채택하고, NAV(항해 전문위원회)를 통하여 2008년까지 e-Navigation의 구체적 개념을 정립하고 향후 개발하여야 할 전략적 비전과 정책을 수립하기로 하였다. 이어서 영국을 의장으로 e-Navigation 전략개발 통신작업반이 구성되었는데, 지난 년간 19개국, 16개 전문기관이 참여하여 아래의 작업이 수행되었다. ○ e-Navigation 개념의 정의와 목적 ○ e-Navigation에 대한 핵심 이슈 및 우선 순위 식별 ○ e-Navigation 개발에 따른 이점과 단점의 식별 ○ IMO 및 회원국 등의 역할 식별 ○ 이행계획을 포함한 추가 개발을 위한 작업계획의 작성 IMO에서 수행되고 있는 e-Navigation 전략 개발 의제 일정은 2008년까지이다. 이 전략 개발에 있어서 중요한 요소는 e-Navigation이 포함할 서비스범위, 포함하는 서비스 제공에 필요한 인프라 및 장비의 식별, 인프라 구축및 운용비용을 부담할 주체에 대한 논의, e-Navigation으로 인한 이익과 투자비용에 대한 비교 분석 등이다. 이 과정에서 정부, 선주, 항만운영자, 선원등의 입장 차이와 선진국과 개발도상국 간의 경제 수준 차이는 전략 개발에있어 큰 어려움을 줄 것이므로, 이들이 합의된 전략을 만들기 위해서는 예정된 기간보다 다소 늦어질 가능성도 있다.e-Navigation 전략 개발이 완료되면 1단계로는 해상교통 관제시스템, 선박선교 장비, 무선 통신장비 등에 대한 표준화 작업이 이루어질 것이다. 이 과정에서 각국 간에 자국 보유 기술을 표준화시키기 위한 경쟁이 치열할 것으로 예상된다. 2단계에서는 e-Navigation 체계 하에서의 다양하고 풍부한 서비스 제공을 위한 관련 소프트웨어 및 하드웨어의 개발이 이루어질 것으로전망되는데, 이는 지난 10년간 육상에서 인터넷망 설치 후 이루어진 관련 서비스 산업의 발전을 돌아보면 쉽게 짐작할 수 있을 것이다.e-Navigation 체계 하에서 선박의 항해는 현재와는 전혀 다른 패러다임으로 바뀔 것이다. 예를 들어 현재 입출항 시 요구되던 복잡한 절차는one-stop 쇼핑 형태로 단순화되고, 현재 선박 중심의 항해에서 육상e-Navigation 센터가 적극적으로 관여하는 항해 체계로 바뀔 것이며, 해상정보의 공유와 활용이 무선 인터넷을 통해 보다 광범위하게 이루어질 것이 다.e-Navigation의 잠재적 시장 규모는 선박에 새로이 탑재될 지능형 통합 항법시스템 구축과 육상 모니터링 및 지원 시스템 등 직접 시장이 약 50조원,전자해도, 통신장비, 관련 서비스 컨텐츠 등 간접 시장의 규모가 150조원으로 총 200조원으로 대략 추산하고 있다. 향후 이 거대한 시장을 차지하기 위한 전략 수립이 필요한 시점이다. 지금까지 항해 장비 관련 산업은 선진국의일부 업체들에 의해 독점되어 왔다. 우리나라는 조선과 해운에서 모두 선진국임에도 불구하고 이 분야에서는 대부분 수입에 의존해 왔다. e-Navigation체계 하에서는 전체 시장이 커지고 장비의 사양이 표준화됨에 따라 어느 소수 업체가 현재처럼 독점하기는 더 이상 어려울 것으로 예상된다. 따라서e-Navigation은 우리나라도 항해 장비 분야 시장을 차지할 수 있는 좋은 기회라고 할 수 있다. 특히 조선 1위의 장점을 적극 활용한다면 다른 나라보다우위의 경쟁력을 확보할 수도 있다. 또한, 서비스 분야의 시장은 IT 기술과밀접한 관계가 있으므로 IT 강국인 우리나라가 충분한 경쟁력을 갖고 있다고 할 수 있다.그러나, EU를 비롯한 선진국에서는 이미 e-Navigation 에 대비한 연구를10여년 전부터 수행해 왔다. 앞에서 언급한 EU의 MarNIS 사업은 현재 거의마무리 단계로 당장 실용화 할 수 있는 수준에 있는 것으로 보인다. 늦었지만 우리도 이를 따라잡기 위한 연구를 서둘러야 할 것이다. 국내에서도e-Navigation의 중요성을 깊이 인식하고, 2006년에는 관련 산학연 전문가들로 작업반을 구성하여 워크숍 등을 개최한 바 있다. 또한 해양수산부에서도e-Navigation 핵심기술 개발을 위한 연구사업을 기획 추진하고 있다.그러나 현재 항해통신장비들의 기술기준은 ITU의 전파규칙(RR)과 IMO결의 및 SOLAS 협약을 따르고 있는데 이들 규약이나 결의에 대한 국제적인 추이와 비교할 때 국내의 기술은 표준화되지 못한 부분이 많은 실정이다.본 연구에서는 e-Navigation sytem중 표준화가 필요한 요소와 전자해도,AIS 등 e-Navigation(통합전자항법시스템)관련 국내산업현황 실태조사를 통해 국내 e-Navigation기술개발 동향에 대해 조사하고자 한다.

• Journal of Korea Port Economic Association
• /
• v.34 no.1
• /
• pp.111-132
• /
• 2018

As China continues to evolve as a major economic power and the Free Trade Agreement (FTA) between the Republic of Korea and China was ratified on June 1, 2015, market volume between the two countries is expected to grow more rapidly. This study aims on improving the efficiency of car-ferry lines. We conducted two surveys- for shippers and forwarders of car-ferry companies, and container liners. The study analyzes the decision factors for delivery companies and their importance for shippers and forwarders of car-ferry companies and container liners. Based on analysis of prior studies on the competition for car-ferry companies and liners, three primary variables are selected-promptness, economics, and safety. The promptness variable consists of shipping time, loading/unloading time, and customs clearing time. The economic variable consists of marine transportation cost from a domestic harbor to China, loading/unloading cost in the harbor, and overland transport cost from the harbor to shippers inland. Finally, the safety variable consists of cargo damage rates, safety facilities, such as lashing and shoring, and punctuality of transportation time. The survey and AHP results show that the promptness, safety, and economics factors are 0.549, 0.309, and 0.142 in the shipper groups of car-ferry companies' category, respectively. It indicates that there is considerable difference in the importance of each factor. In contrast, the factors are 0.350, 0.348, and 0.302 in the forwarders category, which suggests that there is little difference in each factor's importance. As for shippers and forwarders of liners, the importance of each factor is found to be in the following order: economics, safety, and promptness.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.8-8
• /
• 1987

This paper describes on the distribution of the vibration and the noise produced on a skipjack pole and line training ship M/S Pusan 403 (243GT, 1,000ps) under the cruising or drifting condition. The vibration and the noise level were measured by use of protable vibration analyzer (B and K 3513) and sound level meter (B and K 2205), and so the vibration level was converted into dB unit. The check points were set through every decks and around important places of the ship. The results obtained can be summarized as follows: 1. The vibration and the noise level 1) On the main deck, both the vibration and the noise level were highest at the vertically above the main engine, whereas the vibration level was the lowest in the bow store and the noise level beneath the bridge. 2) Under cruising condition, the vibration level around the cylinder head of main engine, port side of the engine room, on the shaft tunnel was 80, 67, 65 dB and the noise level 104, 87, 86 dB, respectively. 3) The vibration level on the vertical line passing through the bridge was the highest at the orlop deck with 60 dB and the lowest on the bridge deck with 55 dB, whereas the noise level the highest at the compass deck with 75 dB and the lowest at the orlop deck with 53 dB. 4) The vibration and the noise level on the open decks were the highest with 65 dB and 84 dB on the boat deck, whereas the vibration level was the lowest at the lecture room with 51 dB and the noise level the lowest at the fore castle deck with 57 dB. 5) On the orlop decks, both the vibration and the noise level were the highest at the engine room with 65 dB and 85 dB, and the lowest at bow store with 54 dB and 52 dB, respectively. Comparing with the vibration level and the noise level, the vibration level was higher than the noise level in the bow part and it was contrary in the stern part of the ship. 2. Vibration analysis 1) The vibration displacement and the vibration velocity were the greatest at the cylinder head of main engine with 100μm and 11mm/sec, and were the smallest at the compass deck with 3μm and 0.07mm/sec. They were also attenuated rapidly around the frequency of 100Hz and over. 2) The vibration acceleration was the greatest at the cylinder head with the main frequency of 1KHz and the acceleration of 1.1mm/sec super(2), and the smallest at the compass deck with 30KHz and 0.05mm/sec super(2).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.54-60
• /
• 1987

This paper describes on the distribution of the vibration and the noise produced on a skipjack pole and line training ship M/S Pusan 403 (243GT, 1,000ps) under the cruising or drifting condition. The vibration and the noise level were measured by use of protable vibration analyzer (B and K 3513) and sound level meter (B and K 2205), and so the vibration level was converted into dB unit. The check points were set through every decks and around important places of the ship. The results obtained can be summarized as follows: 1. The vibration and the noise level 1) On the main deck, both the vibration and the noise level were highest at the vertically above the main engine, whereas the vibration level was the lowest in the bow store and the noise level beneath the bridge. 2) Under cruising condition, the vibration level around the cylinder head of main engine, port side of the engine room, on the shaft tunnel was 80, 67, 65 dB and the noise level 104, 87, 86 dB, respectively. 3) The vibration level on the vertical line passing through the bridge was the highest at the orlop deck with 60 dB and the lowest on the bridge deck with 55 dB, whereas the noise level the highest at the compass deck with 75 dB and the lowest at the orlop deck with 53 dB. 4) The vibration and the noise level on the open decks were the highest with 65 dB and 84 dB on the boat deck, whereas the vibration level was the lowest at the lecture room with 51 dB and the noise level the lowest at the fore castle deck with 57 dB. 5) On the orlop decks, both the vibration and the noise level were the highest at the engine room with 65 dB and 85 dB, and the lowest at bow store with 54 dB and 52 dB, respectively. Comparing with the vibration level and the noise level, the vibration level was higher than the noise level in the bow part and it was contrary in the stern part of the ship. 2. Vibration analysis 1) The vibration displacement and the vibration velocity were the greatest at the cylinder head of main engine with 100$\mu$m and 11mm/sec, and were the smallest at the compass deck with 3$\mu$m and 0.07mm/sec. They were also attenuated rapidly around the frequency of 100Hz and over. 2) The vibration acceleration was the greatest at the cylinder head with the main frequency of 1KHz and the acceleration of 1.1mm/sec super(2), and the smallest at the compass deck with 30KHz and 0.05mm/sec super(2).

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.71-77
• /
• 2013

Most of the maritime accidents are the crash that occurred by complex coastal terrain, increased maritime traffic and frequent weather changes. Therefore, transportation safety is exactly determined using accurate environmental informations, but if informations are inaccurate or insufficient, accident risk can be increased. Therefore, ship need the system that can accurately generate transportation safety information. This paper proposes the transportation safety system and performance evaluation in the real environment. The proposed system includes database of environment informations and navigation algorithm using PPP method to estimate the accurate ship position. Therefore, this system can accurately calculate distance or freeboard between ship with other factors. Futhermore, when weather is deteriorated, crew can sail with database based 3-D monitoring module in the transportation safety system. To verify the function and performance, data of Kyungin ARA waterway and ferry is used to evaluation.

• Journal of Navigation and Port Research
• /
• v.30 no.1 s.107
• /
• pp.53-59
• /
• 2006

Recently, 8,000TEU class containerships has started operating the shipping service and the mega-containership of over 10,000TEU is on planning. A unit cost in relation to shipping service is decreased by the bigger ship based on the economy of scale. Most of the previous studies have been performed and focused on the total operation cost from mega port to mega port. However, the purpose of this paper is to estimate economic efficiency of selected hub ports from point of view of total cost such as service cost(or operation cost), port charge and feeder cost, etc. First, the service-network of mega containerships is based on data of a domestic shipping company operated main line and economic analysis of individual scenarios on the cost and traffic when 10,000TEU mega containerships offer the services. The three scenarios presented in this paper set up the hub ports which are the port of Busan, Shanghai and Yokohama The results show that port of Busan is economically the most efficient one among others.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.20-21
• /
• 2016

Aids to Navigation (AtoN) is marine traffic safety facility to facilitate the safe and efficient movement of shipping and enhance the protection of the marine environment by the regulation or guideline of The International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). By IALA NAVGUIDE, the term "New Danger" is defined as newly discovered hazards not yet shown in nautical documents and includes naturally occurring obstructions such as sandbanks or rocks or man-made dangers such as wrecks. 'New Dangers' should be appropriately marked using Lateral, Cardinal, Isolated Danger marks or by using the Emergency Wreck Marking Buoy. However, the Emergency Wreck Marking Buoy has difficulties with implementation conditions in terms of speed and accuracy to install the buoy. In case of sinking accidents, it is difficult immediately to install the Emergency Wreck Marking Buoy because of weather conditions, marine environments and accident position. This paper studies Auto Releasing New Danger Mark Buoy on the deck which can be automatically to release from the deck of a vessel and float in the water and quickly install the accident position in case of sinking accidents. The buoy will be to reduce the risk of navigation and prevent secondary collisions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.462-472
• /
• 2017

Sunken vessels on major fairways can cause many problems in terms of maritime safety and the marine environment. In order to prevent secondary marine pollution accidents caused by sunken vessels, information on sunken vessels has been collected, a risk assessment has been conducted, and the relevant vessels are being managed according to the results of each assessment. However, there is still a demand for improvements. The most important of the improvement plans is a paradigm shift. In other words, the management of sunken vessels needs to be transformed according to a new paradigm to manage all sunken vessels within three years from the time of sinking. Legislative improvements are also needed for the reporting system for sunken vessels, risk assessment tools, the implementation of risk mitigation measures, and criteria for the implementation cost of risk mitigation measures. In addition, close coordination between marine pollution response and sunken vessel management efforts is needed. As the division of duties between the Korea Coast Guard and the Ministry of Oceans and Fisheries is vague, collaboration between the two ministries is required. Close collaboration is also needed between the departments of navigation safety management and sunken vessel management. Therefore, it is necessary to more clearly establish the relationship between the two systems and create a synergy effect between the two administrative operations using the results of the risk assessment in the Marine Environment Management Act to determine the navigational risk posed by obstacles with regard to the Maritime Safety Act.