• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.37-39
• /
• 2007

고속 활주형선의 선형시험 ${\cdot}$ 검증을 위하여 설 해상모형시험기법을 정립하였으며, 본 시험법을 이용하여 선미 보조동체 장착 유무에 따른 고속 Stepped Hull 선형의 횡동요 및 저항특성을 비교, 분석하였다.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.813-818
• /
• 2007

There are the C.W.C and Towing Tank to the model-test equipments of the boat. A model testing of the high speed boat have a difficult in the performance verification because of very a small the scale-ratio of the ship-model and restricted by flow-velocity of the C.W.C and X-carriage velocity of the T.T. In general, the stepped hull boat is a high of fuel-efficiency because of the resistance reduction by a small wetted surface-area in correspond without stepped-hull boat. But It have a tendency to be bad the rolling performance by reduced stern wetted-area In this paper, the high speed stepped planning-boats with & without attached a stern body were performed to compare the effect of resistance and rolling performance by using sea model-test method.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.29-37
• /
• 1998

Linear equations of motion for submersibles are one of the rest important design parameters, which are used as a governing equation for the shape design and the controller design. But, the estimated maneuvering coefficients in equations of motion by using empirical formulae, theoretical calculations or model tests might have some errors. Therefore the maneuvering coefficients should be verified from sea trial test. In this study, parallel extended Kalman filter method, Nelder & Mead Simplex method and genetic algorithm were applied to the parameter identification of roll maneuvering coefficients based on sea trial data. As a result, it was verified that Nelder & Mead Simplex method gave the most satisfactory results for the mathmatical models and the sea trial data used in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.29-39
• /
• 1999

In this study, mathematical modelling for initial motion of test vehicle launched from sliding launcher is performed, and simulation results from this mathematical models are verified by comparing them with sea trial results. Especially, it is showed that models using strip method give better results than using empirical formulae and linear equations of motion. This mathematical model can give useful tools to design sliding launchers or test vehicles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2C
• /
• pp.95-103
• /
• 2008

Seismic piezocone penetration tests (SCPTu) can be used to obtain dynamic properties of soils as well as cone resistance and penetration pore pressure. However, the SCPTu system can be hardly utilized in marine soils because it is difficult to install the source apparatus which generates the shear wave in offshore site. The authors developed an inhole type piezocone penetration test (CPTu) equipment which both source and receiver composed of bender elements were installed inside the rod located behind the cone. Therefore, it can be applicable to even an offshore site without any additional source apparatus. The objective of this paper is to investigate the practical application of inhole type CPTu by performing laboratory model tests using kaolinite as soft clay. The shear wave velocities of kaolinite soil were measured with time, and the effects of soil disturbance due to the installation of source and receiver were also examined for various distance between source and receiver.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.22-25
• /
• 1994

선체성능, 선박운항성능 및 기관성능의 현황파악과 예측을 하는 것은 선박설계자, 선박운항자 및 선박관리운영자에게 설계, 보선관리 및 용역관리상 대단히 중요하다. 선체성능의 전산원용예측에 관한 대부분의 문헌은 모형수조시험 및 공시해상시험의 자료를 수식화하는 데 집중하고 있다. 따라서 현재까지 자료의 수식화, 예측된 자료와 성능시험결과치의 상관기법 및 PC soft ware를 이용한 선박성능예측의 체계적 접근법 등에 관한 연구가 활발히 진행되어 왔다. 또한 선박의 Abstract Log Book의 자료 및 주기관 성능자료의 수식화, PC soft ware 개발에 의한 선박운 항성능 및 기관성능예측에 대한 연구가 역시 수행되고 있다. 이와 관련하여 본 고에서는 선체 성능(저항과 추진계수), 선박운항성능 및 주기관성능의 예측에 관하여 그 개요를 소개코져 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.40-41
• /
• 2009

In general, ships are towed to keep the safe operations in harbor or channel by tug boats. Due to increase in ocean traffic, many accidents are happened in harbor or channel in these days. Therefore it is necessary to predict manoeuvrability of tug-barge system, and to assure the safety of that system. Turg-barge system is composed of tug boat, barge, and towing cable, connecting both ships. Manoeuvring equations of tug-barge system are suggested, and the scopes of model tests are discussed to establish the mathematical models for tug boats in this paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.78-85
• /
• 2014

LNG-RV has the additional equipments that enable to re-gastify liquefied LNG in LNG carrier. This vessel has Submerged Turret Loading(STL) system which transports gas through submarine terminal. When LNG-RV is operating at sea, the opening condition is formed by detaching STL equipment from a vessel. The primary objective of the current work is to estimate accurate speed loss for the opening condition of the LNG-RV employing numerical calculations and model tests. In the model tests, resistance and self-propulsion tests are carried out for the bare-hull and the opening condition without STL. In addition to these, flow visualization utilizing tuft is used to make the flow patterns visible, in order to get a qualitative or quantitative information for inner part in case of detaching the STL.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.28-31
• /
• 1995

워터제트(Waterjet) 추진의 개념은 선박용 스크류 프로펠러 만큼이나 오래 되었지만, 1960년대 까지도 많은 이용이 없었다. 왜냐하면 스크류 프로펠러가 더 간단하고 가벼우면서 훨씬 더 효 율적인 추진도구로 간주되어 왔기 때문이었다. 그러나 최근 수년 사이에 워터제트로 추진되는 세계적인 선박들 및 제작회사들의 수가 괄목할만한 증가를 보이고 있고, 선진국의 초고속선 개 발과 관령하여 워터제트 추진방식에 대한 새로운 시각에서의 연구가 활발히 진행되어지고 있 다[1]. 21세기 해상교통수당을 선도할 수 있으리라 판단되고 있는 초고속선 개발 연구를 수행하고 있는 선박·해양공학연구센터에서도 초고속선용 추진 장치로서 워터제트 추진기를 선택하였었 다[2]. 이러한 대표적인 이유로서는 종래의 일반적인 선박용 스크류 프로펠러로서는 고속 추진에 한계를 가지고 있는 반면, 워터제트 추진방식은 각 요소들의 최적 설계를 통해 고속에서의 추 진효율 향상을 꾀할 수 있기 때문이었다. 선진국에서는 이미 이러한 워터제트 추진에 대한 성 능해석 기법이 정립되어 있고[3], 중.소형 워터제트 추진기 제작을 통한 경험을 바탕으로 대출력 워터제트 추진기 개발도 가능한 단계이다[4]. 그러나 국내에서는 이에 대한 연구가 거의 없어 외국의 기술에 의존하고 있는 실정이다. 본 고에서는 워터제트 추진기의 기본적인 개념과 당 연구센타에서 수행하고 있는 모형시험법 개발 연구의 일부를 소개하고자 한다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.3
• /
• pp.195-202
• /
• 2007

The normalized difference in incident solar energy between a target surface and a level surface (overheating index, OHI) is useful in eliminating estimation error of site-specific maximum temperature in complex terrain. Due to the complexity in its calculation, however, an empirical proxy variable called northern exposure index (NEI) which combines slope and aspect has been used to estimate OHI based on empirical relationships between the two. An experiment with real-world landscape and temperature data was carried out to evaluate performance of the NEI - derived OHI (N-OHI) in reduction of spatial interpolation error for daily maximum temperature compared with that by the original OHI. We collected daily maximum temperature data from 7 sites in a mountainous watershed with a $149 km^2$ area and a 795m elevation range ($651{\sim}1,445m$) in Pyongchang, Kangwon province. Northern exposure index was calculated for the entire 166,050 grid cells constituting the watershed based on a 30-m digital elevation model. Daily OHI was calculated for the same watershed ana regressed to the variation of NEI. The regression equations were used to estimate N-OHI for 15th of each month. Deviations in daily maximum temperature at 7 sites from those measured at the nearby synoptic station were calculated from June 2006 to February 2007 and regressed to the N-OHI. The same procedure was repeated with the original OHI values. The ratio sum of square errors contributable by the N-OHI were 0.46 (winter), 0.24 (fall), and 0.01 (summer), while those by the original OHI were 0.52, 0.37 and 0.15, respectively.