• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.775-782
• /
• 2017

The position of existing patrol ships has been decided according to subjective judgments, not purely by any reasonable or scientific criteria, because of a lack of access to marine accident positions. In this study, the optimal location of patrol ships is quantitatively determined based on historical marine accident data. The study area used included the coastal sea of Pohang in South Korea. In this study, a k-means clustering algorithm was used to derive the location of patrol ships, and then a Voronoi diagram was used to divide the region around each patrol ship. As a result, the average navigation distance for patrol ships was improved by 4.4 nautical miles, and the average arrival time was improved by 13.2 minutes per marine accident. Moreover, if the locations of patrol ships need to be changed flexibly, it will be possible to optimally arrange limited resources using the technique developed in this study to ensure a fast rescue.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.462-469
• /
• 2023

In this study, we propose a method for evaluating the risk of collision between ships to support determination on the risk of collision in a situation in which ships encounter each other and to prevent collision accidents. Because several uncertainties are involved in the navigation of a ship, must be considered when evaluating the risk of collision. We apply the Dempster-Shafer theory to manage this uncertainty and evaluate the collision risk of each target vessel in real time. The distance at the closest point approach (DCPA), time to the closest point approach (TCPA), distance from another vessel, relative bearing, and velocity ratio are used as evaluation factors for ship collision risk. The basic probability assignments (BPAs) calculated by membership functions for each evaluation factor are fused through the combination rule of the Dempster-Shafer theory. As a result of the experiment using automatic identification system (AIS) data collected in situations where ships actually encounter each other, the suitability of evaluation was verified. By evaluating the risk of collision in real time in encounter situations between ships, collision accidents caused by human errora can be prevented. This is expected to be used for vessel traffic service systems and collision avoidance systems for autonomous ships.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.20-21
• /
• 2016

Aids to Navigation (AtoN) is marine traffic safety facility to facilitate the safe and efficient movement of shipping and enhance the protection of the marine environment by the regulation or guideline of The International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). By IALA NAVGUIDE, the term "New Danger" is defined as newly discovered hazards not yet shown in nautical documents and includes naturally occurring obstructions such as sandbanks or rocks or man-made dangers such as wrecks. 'New Dangers' should be appropriately marked using Lateral, Cardinal, Isolated Danger marks or by using the Emergency Wreck Marking Buoy. However, the Emergency Wreck Marking Buoy has difficulties with implementation conditions in terms of speed and accuracy to install the buoy. In case of sinking accidents, it is difficult immediately to install the Emergency Wreck Marking Buoy because of weather conditions, marine environments and accident position. This paper studies Auto Releasing New Danger Mark Buoy on the deck which can be automatically to release from the deck of a vessel and float in the water and quickly install the accident position in case of sinking accidents. The buoy will be to reduce the risk of navigation and prevent secondary collisions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

Waterway design should prioritize appropriate channel width to ensure preferential safe passage for the arrival and departure of vessels. To calculate the minimum channel width required for safe passage a comprehensive review of several factors is required. These factors include vessel maneuverability, determined by vessel size, type and speed; environmental factors such as wind, tide, and wave action; human factors, including personal experience and operator judgment as well as marine traffic and navigation support facilities for decision making. However, the Korean channel width design standard is based only on vessel length, and requires improvement when compared with the standards of PIANC, USA, and Japan. This study aims to estimate the appropriate channel width required for one-way traffic in a straight channel, considering various vessel and environmental factors, using Fast Time Simulation (FTS). When the wind speed is 25 knots, with a current speed of 2 knots and a normal vessel speed of 10 knots FTS shows that a 150K GT Cruise Ship requires a minimum channel width of 0.67-0.91 the vessel length (L), whereas a 120K TEU Container Ship and a 300K DWT VLCC require 0.79-1.17 and 1.02-1.59, respectively. Such results can be used to calculate the minimum channel width required for safe passage as an improved Korean design standard.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.525-532
• /
• 2022

The port of Mokpo operates the largest number of coastal passenger ships and routes in Korea. These coastal passenger ships pass through narrow channels in the south-west coast of Korea owing to the geographical effect. It is difficult to find a research for the safety of the marine traffic environment in the narrow channel used by coastal passenger ship. Therefore, in this study, the navigation safety of the target coastal passenger ship was analyzed in the narrow channel near the port of Mokpo using the Korea design standard for port and harbour facilities. As a result of the analysis, the width of the narrow channel between Maek-island and Dali-island is narrower than 1.5 times of the target ship's length over all, the degree of curvature of the narrow channel exceeds the standard value of 30°, and several fishing gears exist near the narrow channel. Finally, the following were suggested to improve the safety of navigation on the narrow channel: keeping one-way traffic during the day-time, and navigating through the designated fairway during night·visibility restriction·low tide.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2011

IMO adopt the revision of SOLAS convention on requirement systems for ECDIS and considered an ECDIS as the major system for E-Navigation strategy on marine transportation safety and environment protection. ENC(Electronic Navigational Chart) as the base map of ECDIS is considered as a principal information infrastructure that is essential for navigation tasks. Because ENCs are not easy to utilize for being encoded according to ISO/IEC 8211 file format, used for navigational purpose mainly, it's required to utilize in parts of Marine GIS and various marine application. In this paper, we developed KML conversion technology for ENC application. In details, we analyzed data model and encoding method of ENC, schema structure and data file of KML. Based on this results, we developed the program of KML conversion of ENCs.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.245-250
• /
• 2008

Recently the numerical prediction technique is applied to many fields, because numerical models are developed so much for last decades. The real-time ocean prediction system is one of them and is capable of providing the real-time marine information for users to promote the safety af maritime traffic and preservation of marine resources. The system is composed of observing system, data distribution system and modelling system. In this study authors develop the modelling system and show the results as preliminary study for establishing the real-time ocean prediction system in Busan port. The system test is performed only for M2 tidal modelling due to the lack qf observation data, thus a full-scale test is required in future if enough data are provided Also observing system and data distribution system will be constructed continuously in future, then service for real-time data for users will be initiated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.177-180
• /
• 2005

AIS needs high efficiency and safety in terms of operational management and, in the aspect of service range, it is time to minimize shadow regions through propagation evaluation of AIS transmitter. Thus this study analyzes shadow regions and the scope of propagation of waves from stations through the electric wave environment of AIS. First, this study examines the characteristics of AIS wave and draws up methods to analyze the scope of propagation of waves according to the characteristics. Second, this study finds out service regions and shadow regions of the 22 stations across the nation by analyzing the actual data based on climate and topography, Lastly, this study summarizes the results of wave conductivity evaluation and conductivity problems and proposes improvement measures.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.337-342
• /
• 2010

As AIS AtoN has worked an essential role for aids to navigation, the World-wide IALA-Net has announced plans to build the system. Systematic beacon network may offer opportunities to make an infrastructure for information service and upgrade AtoN service performance. This paper proposes Aids to Navigation information service network for e-NAV. Network based on AIS is consist of AIS AtoN channels as Real, Synthetic or Virtual AIS AtoN. And inner network is consist of Wireless networks as AIS, WCDMA, WIFI, WIBRO, USN or VSAT. Introducing of various network systems can lead to combine and design aomong land, beacon and service network infrastructures.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.4
• /
• pp.169-181
• /
• 2009

IMO adopt the revision of SOLAS convention on requirement systems for ECDIS and considered an ECDIS as the major system for E-Navigation strategy on marine transportation safety and marine environment protection. ENC(Electronic Navigational Chart) as base map of ECDIS is considered as a principal information infrastructure that is essential for navigation tasks. Though ECDIS has many advantages, it's almost impossible for the mariner to recognize the displayed information because of intense display of objects so called the clutter. In this paper, the current status and international standards on SCAMIN((Minimum Scale) attribute have been investigated. Also improvement of SCAMIN attribute of ENCs and grouping method for the sounding values was proposed.