• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1032-1036
• /
• 1999

The electron emission and degradation of the ferroelectric Pb($\textrm{Zr}_{0.5}\textrm{Ti}_{0.5}$)$\textrm{O}_3$ ceramics by the pulse electric field have been investigated as a function of the upper electrode diameter. Polarization increased with the decrease of the upper electrode diameter due to the increase of the volume fraction participated in the polarization reversal near the electrode edge. Simulation using ANSYS 5.3 for the electric field distribution showed that the electric field increased near the upper electrode edge of the asymmetric electrode structure. The ferroelectric volume near the upper electrode edge which contributed to the increase of the polarization and the emission charge per electrode diameter were independent on the upper electrode diameter. Polarization and dielectric constant were decreased due to the erosion of the upper electrode with repeating the emission cycles, but they were recovered by the electrode regeneration. The degradation of the ferroelectric surface resulted in the increase of the coercive field and dielectric loss.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.51-61
• /
• 1999

$SrBi_2Ta_2O_9$ thin films were prepared on $Pt/SiO_2$/Si p-tyPp (100) substrate by r.f. magnetron sputtering method. The films were annealed at $800^{\circ}C$ and characterized in terms of micro-structures and electrical properties depending on film deposition conditions. XRD patterns of SBT films annealed at $800^{\circ}C$ indicated the typical SBT phase of (006), (111), and (200) with BiPt additional peaks. SEM images show that crystal gram become to grow with increasing the substrate temperature and decreasing the gas pressure. The remanant polarization(2Pr) and the coercive field(Ec) of 200nm thickness SBT film which was deposited at 10$0^{\circ}C$ under 50mtorr gas pressure and annealed at $800^{\circ}C$ were 20.07$\mu$C/$\textrm {cm}^2$ and 79kV/cm, respectively.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1051-1057
• /
• 2000

TiO$_2$와 CeO$_2$박막을 Si 위에 증착한 후 MOCVD법에 의해 PbTiO$_3$박막을 증착하여 MFIS 구조를 형성하였다. 절연층의 후열처리가 절연층 및 MFIS 구조의 전기적 특성에 미치는 영향을 관찰하기 위해 산소분위기와 $600^{\circ}C$~90$0^{\circ}C$의 온도범위에서 후 열처리를 행하였고, C-V 특성 및 누설전류 특성을 분석하였다. CeO$_2$와 TiO$_2$박막의 유전상수는 증착 직후 6.9와 15였으며, 90$0^{\circ}C$ 열처리를 행한 후 약 4.9와 8.8로 감소하였다. 누설전류밀도 역시 증착 직후 각각 7$\times$$10^{-5}$ A/$ extrm{cm}^2$와 2.5$\times$$10^{-5}$ A/$\textrm{cm}^2$에서 90$0^{\circ}C$ 열처리를 거친 후에 약 4$\times$$10^{-8}$ A/$\textrm{cm}^2$와 4$\times$$10^{-9}$ A/$\textrm{cm}^2$로 감소하였다. Ellipsometry 시뮬레이션을 통해 계산된 계면층의 두께는 90$0^{\circ}C$에서 약 115$\AA$(CeO$_2$) 및 140$\AA$(TiO$_2$)까지 증가하였다. 계면층은 MFIS 구조에서 강유전층에 인가되는 전계를 감소시켜 항전계를 증가시켰고, charge injection을 방지하여 Al/PbTiO$_3$/CeO$_2$(90$0^{\circ}C$, $O_2$)/Si 구조의 경우 $\pm$2 V~$\pm$10 V의 측정범위에서 memory window가 계속 증가하는 것을 보여주었다.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.392-399
• /
• 1997

In this study, the effect of the sintering temperature on the dielectric and piezoelectric properties of 0.5 wt% $MnO_{2}$-doped $0.125Pb(Mg_{1/2}Nb_{2/3})O_{3}-0.435PbTiO_{3}-0.44PbZrO_{3}$ ceramics were investigated aiming at ultrasonic motor applications. From experimental result, it was found that the optimal sintering temperature condition was at $1270^{\circ}C$. The sample sintered at $1270^{\circ}C$ had density of $7.72\;g/cm^{3}$, dielectric constant of 570, dielectric loss of 0.82%, remanent polarization of $19.18{\mu}C/cm^{2}$, coercive field of 9.63 kV/cm, electromechanical coupling factor of radial mode of 55.1%, mechanical quality factor of 886. Temperature and frequency dependence of dielectric constant and dielectric loss of the sintered sample at $1270^{\circ}C$ was also investigated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.48-55
• /
• 2024

The changes in threshold voltage and DIBL were investigated for changes in remanent polarization P_r and coercive field E_c, which determine the characteristics of the P-E hysteresis curve of ferroelectric in NCFET (negative capacitance FET). The threshold voltage and DIBL (drain-induced barrier lowering) were observed for a junctionless double gate MOSFET using a gate oxide structure of MFMIS (metal-ferroelectric-metal-insulator-semiconductor). To obtain the threshold voltage, series-type potential distribution and second derivative method were used. As a result, it can be seen that the threshold voltage increases when P_r decreases and E_c increases, and the threshold voltage is also maintained constant when the P_r/E_c is constant. However, as the drain voltage increases, the threshold voltage changes significantly according to P_r/E_c, so the DIBL greatly changes for P_r/E_c. In other words, when P_r/E_c=15 pF/cm, DIBL showed a negative value regardless of the channel length under the conditions of ferroelectric thickness of 10 nm and SiO₂ thickness of 1 nm. The DIBL value was in the negative or positive range for the channel length when the P_r/E_c is 25 pF/cm or more under the same conditions, so the condition of DIBL=0 could be obtained. As such, the optimal condition to reduce short channel effects can be obtained since the threshold voltage and DIBL can be adjusted according to the device dimension of NCFET and the P_r and E_c of ferroelectric.

• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.152-159
• /
• 2019

To characterize new physiologically active components in Korean apple vinegar, a crude polysaccharide (KAV-0) was prepared by precipitation with 80% (v/v) ethanol. KAV-0 mainly comprises 38.2% mannose, 19.1% galactose and 14.3% glucose. In an in vitro cytotoxicity analysis, KAV-0 promoted the proliferation of peritoneal macrophages and RAW 264.7 cells in a dose-dependent manner, and showed no cytotoxicity in B16-BL6 melanoma cells. Murine peritoneal macrophages and RAW 264.7 cells stimulated by KAV-0 produced various cytokines such as interleukin (IL)-6, IL-12, and tumor necrosis factor $(TNF)-{\alpha}$, and nitric oxide (NO). Intravenous (i.v.) administration of KAV-0 significantly augmented NK cell cytotoxicity against Yac-1 tumor cells. In experimental lung metastasis caused by B16-BL6 melanomas, prophylactic i.v. administration of KAV-0 at a dosage of $1,000{\mu}g/mouse$ inhibited lung metastasis by 53.0%. These results suggest that the crude polysaccharide (KAV-0) isolated from Korean apple vinegar has a considerably high anti-metastatic activity and immunomodulatory activities beneficial to human health.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.29-37
• /
• 1999

In this study, we have prepared PLT thin films having various La concentrations by using sol-gel method and studied on the effect of La concentration on the electrical properties of PLT thin films. As the La concentration increases from 5mol% to 28mol%, the dielectric constant at 10kHz increases from 428 to 761, while the loss tangent decreases from 0.063 to 0.024. Also, the leakage current density at 150kV/cm has a tendency to decrease from 6.96${\mu}A/cm^2$ to 0.79${\mu}A/cm^2$. In the result of hysteresis loops of PLT thin films, the remanent polariation and the coercive field decrease from 9.55${\mu}C/cm^2$ to 1.10${\mu}C/cm^2$ and from 46.4kV/cm to 13.7kV/cm, respectively. With the result of the fatigue test on the PLT thin films, we have found that the fatigue properties are improved remarkably as the La concentration increases from 5 mol% to 28mol%. In particular, the PLT28) has paraelectric phase and its charge storage clensity and leakage current density at 5V are 134fC/${\mu}cm^2$ and 1.01${\mu}A/cm^2$, respectively. The remanent polarization and coercive field of the PLT(10) film are 6.96${\mu}C/cm^2$ and 40.2kV/cm, respectively. After applying of $10^9$ square pulses with ${\pm}5V$, the remanent polarilzation of the PLT(10) film decreases about 20% from the initial state. In the results, we conclude that the 10mol% and the 28mol% La doped PLT thin films are very suitable for the capacitor dielectrics of new generation of DRAM and NVFRAM respecitively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.7-14
• /
• 2000

A Bi$_{4}$Ti$_{3}$O$_{12}$ (BIT) thin film is prepared by sol-gel method using acetate precursors and evaluated whether it could be applied to NVFRAM (Non-Volatile Ferroelectric RAM). The drying and the annealing temperature are 40$0^{\circ}C$ and $650^{\circ}C$, respectively and they are determined from the DT-TG (Differential Thermal-Thermal Gravimetric) analysis. The BIT thin film deposited on Pt/Ta/SiO$_{2}$/Si substrate shows orthorhombic perovskite phase. The grain size and the surface roughness are about 100 nm and 70.2$\AA$, respectively. The dielectric constant and the loss tangent at 10 KHz are 176 and 0.038, respectively, and the leakage current density at 100 ㎸/cm is 4.71 $mutextrm{A}$/$\textrm{cm}^2$. In the results of hysteresis loops measured at $\pm$250 ㎸/cm, the remanent polarization (Pt) and the coercive field (Ec) are 5.92 $\mu$C/$\textrm{cm}^2$ and 86.3 ㎸/cm, respectively. After applying 10$^{9}$ square pulses of $\pm$5V, the remanent polarization of the BIT thin film decreases as much as about 33% from 5.92 $\mu$C/$\textrm{cm}^2$ of initial state to 3.95 $\mu$C/$\textrm{cm}^2$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.1-8
• /
• 2002

In order to study electric properties of (Pb$\_$0.9/La$\_$0.1/)Ti$\_$0.975/O$_3$(PLT (10)) films with varying excess lead concentration (7.5, 10, 12.5, 15 ㏖% excess lead), the PLT films were deposited by sol-gel process. DTA analyses reveal that the crystallization temperature of the precursor powers decreased with increasing amount of excess lead. XRD patterns of PLT reveal pure perovskite structure and the preferred orientation increased with increasing Pb content in the films. With increasing amount of excess P$\_$b/, the relative permittivity ($\xi$$\_$r/) increased and leakage current density at 100 ㎸/cm transformed 4.01$\times$10$\^$-5/, 2.42$\times$10$\^$-6/, 1.27$\times$10$\^$-6/, 1.56$\times$10$\^$-6/A/㎠ respectively. In the results of hysteresis loops measured at 166 kV/cm, the remanent polarization (P$\_$r/) and the coercive field (E$\_$c) are 6.36$\mu$C/cm and 58.7 ㎸/cm, respectively (at 12.5 ㏖% excess P$\_$b/) With increasing amount of excess Pb, the remanent polarization for PLT thin film degraded to about 44%, 27%, 15%, 16% of the initial value after 10$\^$9/ cycles./TEX>) With increasing amount of excess Pb, the remanent polarization for PLT thin film degraded to about 44%, 27%, 15%, 16% of the initial value after $10^{9}$ cycles.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.313-322
• /
• 2001

The effects of Zr/Ti concentration ratio in PLZT (10/y/z) thin films prepared by sol-gel method are investigated for the NVFRAM application. Rosette and pyrochlore phase are observed in PLZT (10/40/60) thin film and the (100) orientation, the grain size, and the surface roughness of PLZT thin films increase due to the increase of Ti amount in Zr/Ti concentration ratio. As Ti amount of Zr/Ti concentration ratio increases, the dielectric constants at 10KHz decrease from 600 to 400, while the loss tangents increase from 0.028 to 0.053 and the leakage current densities at 170 kY/cm decrease from 1.64$\times$10$^{-6}$ to 1.26$\times$10$^{-7}$ A/$\textrm{cm}^2$. In the results of hysteresis loops measured at $\pm$ 170 ㎸/cm, the remanent polarization and the coercive field increase from 6.62 to 12.86 $\mu$C/$\textrm{cm}^2$ and from 32.15 to 56.45 ㎸/cm, respectively, according to the change from 40/60 to 0/100 in Zr/Ti concentration ratio. Fatigue and retention properties also improve much as the Zr/Ti concentration ratio change from 40/60 to 0/100. After applying 10$^{9}$ square pulses with $\pm$5V, the remanent polarization of the PLZT (10/40/60) thin film decreases 50％ from the initial state while that of the PLZT (10/0/100) thin film decreases 30％. In the results of retention measurements of 10$^{5}$ s, the remanent polarization of the PLZT (10/0/100) thin film decreases only 11％ from the initial state, while that of the PLZT (10/40/60) thin film decreases 40%.