• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.543-550
• /
• 2011

The gravity anomaly is a basic geophysical data applied in various fields such as geophysics, geodesy and national defense. In general, the gravity anomaly is used through a interpolation process based on the constructed database. The gravity variation, however, is appeared in various shapes depending on the topography and the density of the underground structures. Therefore, the interpolation could lead to a large differences if the gravity fields do not satisfy the assumptions on the signal behavior like linear or a certain degree polynomials. Furthermore, the interpolation does not reflect the physical characteristics of the gravity such as the harmonic condition. In this study, the gravity modeling using the plane Fourier series and radial basis functions are performed to overcome the problems in the usual interpolation. The results of the modeling is analyzed for the case of the gravity referenced navigation focused on the signal characteristics. Based on the study, it was found that the results from modeling are not much different to that from the interpolation in a smoothly varied area. In case of the highly varied area, however, a large differences are appeared among the three methods. Especially, the Fourier series shows the most smooth variations in the modeled gravity values while the highest variations appeared in the interpolation. Applying to the gravity referenced navigation, it was found that the modeling is more effective in calculation cost. It is considered that the results from this study provides a basis on effective modeling of the gravity fields in terms of the signal characteristics and resolution for various application fields.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.1
• /
• pp.35-42
• /
• 2012

In this study, a feature-points-tracking algorithm is suggested using a particle filter for vision based navigation system. By applying a dynamic model of the feature point, the tracking performance is increased in high dynamic condition, whereas a conventional KLT (Kanade-Lucas-Tomasi) cannot give a solution. Futhermore, the particle filter is introduced to cope with irregular characteristics of vision data. Post-processing of recorded vision data shows that the tracking performance of suggested algorithm is more robust than that of KLT in high dynamic condition.

• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.191-203
• /
• 2009

Simulation is the work that identifies the characteristics of some problem through the simulated experiments. During the experiments it is frequently required to change or replace the simulation models, algorithms, or input/output data. Especially, in the case of the simulation works performed by replacing algorithms, if a replaceable component that implements a specific algorithm is not correct with respect to its functionality it is very difficult to carry out the simulation works successfully. In this paper, we suggest a test framework that verifies functional correctness of the replaceable component in the software-based GNSS (Global Navigation Satellite System) simulation environments. When a component is replaced, this framework enables us to properly execute the functional test for the component according to its context.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.430-448
• /
• 2001

In navigation system, a primary task is to compute the minimum cost route from the current location to the destination. One of major problems for navigation systems is that a significant amount of computation time is required when the digital road map is large. Since navigation systems are real time systems, it is critical that the path be computed while satisfying a time constraint. In this paper, we have developed a HiTi(Hierarchical MulTi) graph model for hierarchically structuring large digital road maps to speedup the minimum cost path computation. We propose a new shortest path algorithm named SPAH, which utilizes HiTi graph model of a digital road map for its computation. We prove that the shortest path computed by SPAH is the optimal. Our performance analysis of SPAH also showed that it significantly reduces the computation time over exiting methods. We present an in-depth experimental analysis of HiTi graph method by comparing it with other similar works.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.101-110
• /
• 2000

This study focuses on examination of the availability and effectiveness about application of the differential GPS methods for navigation and acquisition of the geo-spatial information. For this, the algorithms related to a navigation solution and differential GPS were implemented in MATLAB code, a number of software simulations on test model were carried out to assess its performance, comparing the results with those obtained from the commercial software. Expecially, the results coming from tracking test on test model of the OO's WADGPS which is the commercial real-time satellite-based augmentation system via geostationary satellite (GEOs), which has been investigated with those from the above GPS methods. And also, the accuracy of absolute positioning by Navigation solution and WADGPS before and after SA-off has been compared. The above results show that DGPS methods are very reliable and efficient methods for acquisition of the geo-spatial information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.101-105
• /
• 2004

The purpose of the study is to develop ship's bearing sensor using CPS receiver which can play a role as a ship's secondary compass. In this research, two GPS receivers are used to determine the bearing in real time. Then we investigated the bearing accuracy associated with the error pattern of two GPS receivers. Especially, the results are as follows ; - The investigation on the system design of GPS-Compass - The modeling to compute heading of sailing - The analysis on bearing accuracy with the error pattern - The defining possibility to play a role as a ship's secondary compass

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.163-170
• /
• 2016

Tropospheric delay is one of the largest error source in pseudolite navigation system. Because a pseudolite is installed on the ground and transmits its signal to a user in the air or on the ground, the conventional tropospheric delay model developed for a satellite navigation doesn't work properly. In this paper, performance analysis of several pseudolite tropospheric delay models has been done using meteorological data. Based on the result, a new compensation method for Hopfield model has been proposed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.332-340
• /
• 2013

This paper reports a programming toolkit for implementing localization and navigation of a mobile robot both in real world and simulation. Many of the previous function libraries are difficult to use because of their complexity or lack of usability. The proposed toolkit consist of functions for dead reckoning, motion model, measurement model, and operations on directions or heading angles. The dead reckoning and motion model deals with differential drive robot and bicycle type robot driven by front wheel or rear wheel. The functions can be used for navigation in both real environment and simulation. To prove the feasibility of the toolkit, simulation results are shown along with the results in real environment. It is expected the proposed toolkit is used for test of algorithms for mobile robot navigation such as localization, map building, and obstacle avoidance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.410-416
• /
• 2012

In recent years, unmanned underwater vehicles(UUVs) have emerged as viable technical solution for conducting underwater search, surveillance, and clearance operations in support of mine countermeasure missions(MCMs) because of her autonomy and long time endurance capability. It is necessary for UUV for MCM system design to define system specification from various configuration alternatives. This paper introduces a simulation model for mine countermeasure mission effectiveness analysis and presents some simulation results under various tide conditions for validation of the proposed simulation model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.219-229
• /
• 2018

This paper proposes Kalman Filter-based relative navigation algorithms for proximity tasks such as rendezvous/docking/cluster-operation of spacecraft using PSD Sensors and Infrared Beacon Modules. Numerical simulations are performed for comparative analysis of the performance of each relative-navigation technique. Based on the operation principle and optical modeling of the PSD Sensor and the Infrared Beacon Module used in the relative navigation algorithm, a measurement model for the Kalman filter is constructed. The Extended Kalman Filter(EKF) and the Unscented Kalman Filter(UKF) are used as probabilistic relative navigation based on measurement fusion to utilize kinematics and dynamics information on translational and rotation motions of satellites. Relative position and relative attitude estimation performance of two filters is compared. Especially, through the simulation of various scenarios, performance changes are also investigated depending on the number of PSD Sensors and IR Beacons in target and chaser satellites.