• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.220-221
• /
• 2017

The initial light emitting diode (LED) has been used as a display device for various mechanical devices due to its low power. The development of LED technology has made it possible to express color with high power and high brightness. Therefore, it is used as a display such as a traffic signal, a large electric signboard, and an automobile display, and is also adapted as an indoor or outdoor light source such as an incandescent or a fluorescent lamp which requires the high luminance. The bulb of marine lantern, which is used for the aids to navigation, was replaced to LED. The first marine LED lantern was manufactured using multiple LEDs. However, if the optical design is renewed by the development of LED or even if a few LEDs are used, it is possible to satisfy the brightness and the light distribution required by the marine LED lantern.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.259-268
• /
• 2004

For the last years, it has become hot issue such as disposal of the treated wastewater, which caused by increment of a population and industrial development at the coastal areas. The ocean outfall system discharges primary or secondary treated effluent into coastline or at the deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the see, surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. This paper deals ocean outfall design which effects to decision-making about marine environment management and wastewater treatment. In order to make predictions of dilution of discharged water and the trajectory of a plume, CORMIX has been used considering several elements including a seasonal and tidal changes. These solutions are strung together to provide basic data and general drawings for effective management of outfall.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.34-36
• /
• 2013

Despite the fact that navigation technology and educational programs were developed and maritime law has been enforced strictly, the number of maritime accidents has not dropped significantly. In order to reduce traffic accidents at sea, the preventive index for maritime accidents is designed and measured to evaluate and visualize the activities performed. The survey module is composed of preventive domains such as education, engineering, enforcement and information. The index was abstracted from the statistics of maritime accidents causes(2010~2012). It can be evaluated by using the newly developed survey modules. It was found that there is some correlation between the index value and the accident rate of maritime traffic. It is expected that this index will become another useful tool to help prevent maritime accidents.

• Journal of Korea Port Economic Association
• /
• v.33 no.1
• /
• pp.89-110
• /
• 2017

The organization of the shipping conference -an international cartel, was approved by countries that recognized it for stabilizing routes as well as preventing excessive competition among liner shipping companies and recognized the characteristic of the liner service that is regularly repeated in the international liner shipping market. However, due to competition in bulk transportation and development of multimodal transport through new entrants, power expansion and vessel enlargement of non-aligned shipping companies; the shipping conference started collapsing, and was eventually abolished. As the shipping conference played an important role in the liner shipping market, there were changes in the competition structure of the liner shipping market, and this accordingly drove research on the effects of the abolition of the shipping conference on the liner shipping market. The effects of abolition of the shipping conference on the liner shipping market was analyzed after surveying the factors related to abolition of the shipping conference, and through the use of correlation and multiple regression analyses. Subsequent to the abolition of the shipping conference, the liner shipping companies increased global containership bottoms. Consequently, this led to fierce competition of freight charges. As a result, profitability of shipping companies diminished. However, shipping companies with a dominating cost structure recorded profits, while shipping companies with an inferior cost structure started recording a loss.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.139-145
• /
• 2002

The flow zone through propeller jets are used in evaluating the environmental and constructional effects of navigation on the waterway. It relies on the characteristics of ships and water depth. A numerical model using the momentum theory of the propeller and Shield's diagram was developed in a restricted waterway. Equations for discharge are presented based on thrust coefficients and propeller speed and are the most accurate means of defining discharge. Approximate methods for discharge are developed based on applied ship's power. Equations for discharge are as a function of applied power, propeller diameter, and ship speed. Water depth of the waterway and draft of the shop are also necessary for the calculation of the grain size of the initial motion. The velocity distribution of discharge from the propeller was simulated by the Gaussian normal distribution function. The shear velocity and shear stress were from the Sternberg's formula. Case studies to show the influence of significant factors on sediment movement induced by the ship's propeller at the channel bottom are presented.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.111-119
• /
• 2003

In order to improve navigational safety of ships, an ocean wave prediction model of high precision within a short time, dealing with multi-directional random waves from the information of the sea surface winds encountered at the planned ship's course, was introduced for construction of ocean wave forecasting system on the ship. In this paper, we investigated a sea disaster occurred by a stormy weather in the past. We analyzed the sea surface wind first and then carried out ocean wave hindercasting simulations according to the routes the sunken vessel. From the result of this study, we concluded that the sea disaster was caused by rapidly developed iou pressure system Okhotsk Sea and the predicted values by the third generation wave prediction model(WAM) was agreed well with the observed significant wave height, wave period, and directional wave spectrum. It gives a good applicability for construction of a practical on-board calculation system.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.303-308
• /
• 2009

Recently, unmanned systems have been studied and developed in various areas including aircrafts, automobiles and vessels. In addition, many researches about unmanned systems in Korea have been studying actively with the advancement of IT However, it is not satisfied with the result of the researches and developments. Bemuse of the reason we've here tried to make a very small USV which is a barge type. We applied the Great circle navigation calculation based on GPS to the autonomous navigation algorithm and used the LabVIEW 8.2 developed by NI corp. for programming The engine and rudder were controlled by pulse width modulation method. The engine system was composed of the DC motor and ESC(Electronic Speed Controller). It was also applied by the direct cooling system using DC motor pump. A very small USV was designed and made by ourself and it was verified the effectiveness of autonomous navigation algorithm through the tests at the sea.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.331-336
• /
• 2010

The free surface influenced the wake behind a circular cylinder and its effects were investigated experimentally in a circulating water channel with the variation of water depth. Instantaneous velocity fields were measured in this paper. The measured results has been compared with each other to investigate the flow characteristics of the circular cylinder's 2-dimensional section at $Re=1.0{\times}10^3$ using 2-frame grey level cross correlation PIV method. The flow around the circular cylinder with free surface affected the wake structure. Especially, in case of d=1.0D, the boundary layer was measured in the whole area. The separation point and boundary layer of the circular cylinder could be controlled by the water depth.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.221-224
• /
• 2005

According as marine leisure industry has developed and the demand of leisure culture has increased rapidly, a desire about service which supply marine safety and connect marine information is enlarging. We wish tc develop contents of download form that supply geographic information of Electronic Navigational Chart(ENC) in the marine that is digitalized to carrying along terminal of WIPI base and various informations for marine leisure. For this, DB that offer ENC and additional information should be constructed. Also, we need server (CPS; Contents provider Server) that offer required contents. In this paper, we design web retrieval component which store request information to database. When consumer required necessary information through personal mobile device, CPS can inform that. So, we wish to develop web retrieval agent component that parse informations in various World Wide Webs, and store to database.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.281-288
• /
• 2002

It might be true that both experimental and analytic techniques have been developed in the vibration analysis end engineering. It could not be said, however, that the experimental method has been also developed as much as analytic method, such as Finite Element Method One of the reason is that computation time becomes longer and that the solution often diverges depending on the choice of initial value in solving nonlinear equation. The equation in experimental modal analysis is usually composed of the nonlinear term of natural frequency and modal damping ratio, and the linear one of equivalent stiffness. In this study, the nonlinear terms were solved first, and then the linear term was obtained. The experimental modal parameters were estimated, applying the developed experimental modal analysis curve-fitting method to the super-structure model. In addition, the number of modes and modal damping ratio could be easily determined by the developed program with the application of graphical techniques and with easy handling button.