• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.406-414
• /
• 2014

In this paper, it is introduced characteristics of FMCW-type Radar Altimeter for KUH, and its defects occurred during ground/flight test in initial product phase. In addition, it is also described 'data/control flow model' based fault analysis results of S/W and processes of verifying improvement design through flight test as well as aircraft system integration test called MEP SIL. As a result of design improvement and verification, it is validated that settling the defects and improving not only safety but also capability of the KUH.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.97-104
• /
• 2007

In this paper, we have proposed an integrated aircraft development environment which can support virtual design and development for Systems Engineering and IPPD(Integrated Product and Process Development). We have also proposed the ViMS(Virtual Mockup System) which can perform a system design review on an integrated aircraft development environment. The ViMS is an integrated virtual design support system with immersive design review functionality to make a virtual mockup instead of a physical mockup through the virtual reality technology. The functionality of the ViMS consists design data management, design technology, design verification, and design assessment. We have described the detailed development artifact, case studies and conclusions of using the ViMS functionality.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.6
• /
• pp.639-649
• /
• 2020

Air data systems measure airspeed, pressure altitude, angle of attack and angle of sideslip. These measurements are essential for operating flight control laws to ensure safe flights. Since the loss or corruption of air data measurements is considered as catastrophic, a high level of operational reliability needs to be achieved for air data systems. In the case of unmanned air vehicles, failure of any of air data sensors is more critical due to the absence of onboard pilot decision aid. This paper presents design of a dual redundancy air data system and the integration process for an unmanned air vehicle. The proposed dual-redundant architecture is based on two independent air data probes and redundancy management by central processing in two independent flight control computers. Starting from unit testing of single air data sensor, details are provided of system level tests used to meet overall requirements. Test results from system integration demonstrate the efficiency of the proposed process.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.354-358
• /
• 2009

Micro gas turbine engine is well known as a power plant of unmanned aerial vehicle and a small scale emergency generation system and also, it is significant as initial research of large gas turbine and educational purpose of gas turbine. Many sort of Micro gas turbine test set for education is produced by several manufacturers, but all of the engine control system of them is separated with data acquisition system; moreover, the engine control algorithms are inaccessible and related variables could not be collected. In this investigation, the Integrated Modifiable Test Rig which has modifiable engine start-up, drive and situational control logics is developed by LabVIEW with I/O devices and it provides wide experimental applicability to studies of dynamic characteristics of fuel system and combustion instability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.124-133
• /
• 2003

We propose an application of the Object-Oriented design methodology to develop operational flight program(OFP) for stores management computer(SMC) which manages and controls stores inventory, stores activation, launch for missiles, and release of the conventional weapons. For the development of SMC, a military version of PowerPC 603e is used as a central processing unit board and VxWorks real-time operating system is used. The Tornado software development environment(SDE) and the programming language Ada95 are used for OFP development. We design three layerd in the OFP for the independency of the software modules. An avionics system computer(ASC) simulator and a test bench are developed for the SMC integration test and verification test. And the tests are rigorously and successfully conducted.

• The KIPS Transactions:PartD
• /
• v.13D no.5 s.108
• /
• pp.749-754
• /
• 2006

Recently, many enterprises are introducing information systems for their competitive advantages. For enhancing the utilization level of enterprise information system, it is quite important to monitor the usage states of the information systems continuously. However, most enterprise information systems lack this functionality. Proposed in this paper is the framework of IAM (Information Activity Monitoring), which is defined as real-time reporting and alerting of significant information-related activities. This IAM framework provides 4 different views about the information system (data, IT system, business process, and participant) and is implemented as a part of integrated design/manufacturing information system developed by aerospace parts manufacturer. By using the IAM function, IT personnel can monitor significant information-related activities systematically and feedback to their users timely, and ultimately enhance the utilization level of information system.

• Korean Security Journal
• /
• no.58
• /
• pp.35-58
• /
• 2019

Drone was originally developed for air force aircraft or missile exercise shooting targets, and is being considered as the entire unmanned aircraft to the public. The core concept of a drone can be divided into 'unmanned' and 'aircraft'. However, there are many questions about whether the Fourth Industrial Revolution, expressed as a convergence scientific innovation, is appropriate at a time when smart cities are proposed as a concept of new urban spatial formation, and the role of self-driving vehicles, including drones, is being emphasized within the new urban integrated transport system. In this study, the concept of the existing drones was analyzed for the development process, definitions in each country's laws, and the results of the preceding research to present a concept suitable for future society and a unified term. It is not desirable to define a drone for the purpose of a country, an institution, or an operating entity, depending on the circumstances of the era. It is more reasonable to find the concept of a drone based on human life than in the traditional way, and more reasonable considering the development of the drones in the future. Subsequent studies should be more detailed, more data and research results analyzed, and discussed areas that were not covered in this study. Based on this, research should also be conducted on a variety of topics, including legislation, preparation of operational regulations, and related industrial processes and regulations.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.333-354
• /
• 2011

After the terrorist attack of 9/11 on the USA, the security concern to global trade has been raised. In particular, the USA has actively promoted a series of initiatives and rules such as CSI, 24 hour rule, C-TPAT, and so on in the area of logistics activities, which aimed to better protect the country against the potential terrorist threats. While implementing such schemes called as a multi-layed logistics security strategy, a large number of countries trading with USA are facing with the issues of additional time and costs for inspecting cargos in their logistics facilities. As a result, most countries all over the world have sought a way to minimize the impacts from such strategy. The Korea also is preparing the several security programs operated by various ministries, which are aiming to not only improve the efficiency of trade flows but also to ensure supply chain security. However, many companies are expressing the inefficiency of operating such programs. Thus, this paper analyzed several global supply chain security programs currently adopted by international organizations(ISO, WCO, and IMO) and major countries(USA, EU, and Singapore) and suggested a guideline for developing the national logistics security system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.538-544
• /
• 2021

Technology readiness assessment is a procedure for managing defense project risk factors based on the preemptive identification of technical risks. Under current regulations, technology readiness is determined based on considerations of the ratings of factors itemized on a checklist, whether unsatisfied factors have a fatal impact on the project, and whether countermeasures for unsatisfied factors have been established. However, objective criteria for assessing the impact of unsatisfied factors have not been presented, and thus, at present, the results of technology readiness level determinations are largely subjective. In addition, the importance of questions on the checklist is dependent on individual project characteristics and this is not considered during the assessment process. In this paper, we propose an improved technology readiness assessment procedure that considers the characteristics of each project. Using the proposed procedure, we quantitatively determined the importance of each checklist item using a weighting method. We found the devised procedure improved the reliability and objectivity of technology readiness assessment results. A case analysis of a complex weapons system is presented to demonstrate these improvements.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.3-32
• /
• 2014

Safety Management System is the aviation industry policy for while operating the aircraft, to ensure the safety crew, aircraft and passengers. For operating a safe aircraft, in order to establish the international technical standards, the International Civil Aviation Organization has established the Annex 19 of the Convention on International Civil Aviation. As a result, member country was supposed to be in accordance with the policy of the International Civil Aviation Organization, to accept the international standard of domestic air law. The South Korean government announced that it would promote active safety management strategy in primary aviation policy master plan of 2012. And, by integrating and state safety programmes(ssp) and safety management system(sms) for the safe management of Annex 19 is to enforce the policy on aviation safety standards. State safety programmes(ssp) is a system of activities for the aim of strengthening the safety and integrated management of the activities of government. State safety programmes(ssp) is important on the basis of the data of the risk information. Collecting aviation hazard information is necessary for efficient operation of the state safety programmes(ssp) Korean government must implement the strategy required to comply with aviation methods and standards of the International Civil Aviation Organization. Airlines, must strive to safety features for safety culture construction and improvement of safety management is realized. It is necessary to make regulations on the basis of the aviation practice, for aviation safety regulatory requirements, aviation safety should reflect the opinion of the aviation industry.