• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.593-596
• /
• 2021

본 논문에서는 지형의 고도와 기울기를 고려하여 사운드의 확산과 회절을 인터렉티브하게 표현할 수 있는 사운드 합성 기법을 제안한다. 우리의 접근 방식은 광선 추적법(Raytracing)을 기반으로 소리의 크기를 보여줄 수 있는 사운드 강도 맵을 빠르게 계산한다. 지형의 고도와 기울기 값을 고려하여 소리의 강도 맵에 가중치를 적용하여, 결과적으로 지형의 지오메트리 분석인 큰 계산 과정을 피하고 지형을 고려한 소리의 크기를 인터렉티브하게 업데이트한다. 이 과정에서 소리의 근원지에 따른 고도 간의 격차를 계산하여 소리의 크기를 자동으로 감쇠시키며, 주변 지형의 공간 기울기를 기반으로 기울기의 차에 따라 소리의 크기를 자동으로 감쇠시킨다. 본 논문에서 제안하는 방법을 이용한 소리는 실제 높낮이가 있는 현실의 지형에서 듣는 소리의 전파 및 감쇠와 유사한 형태를 보여주며, 소리의 위치에 따라서 소리 감소 패턴이 변경되고, 또한, 지형에 따라서 소리의 크기가 제어되는 결과를 보여준다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.317-325
• /
• 2011

In this paper a robust voltage controller for a single-phase UPS inverter is newly presented. The voltage controller is designed using ${\mu}$-based robust control scheme to simultaneously guarantee robust stability and robust tracking performance in the presence of load variations. Firstly the robust performance of the resulting controller is theoretically confirmed via ${\mu}$-analysis. Then simulations and experiments for the single-phase inverter system with linear and nonlinear loads demonstrate feasibility of the proposed control method providing improved performance - good regulation and fast dynamic response.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.209-212
• /
• 2000

This paper describes the design and implementation of a hard- wired AGV controller using CPLD(Complex Programmable Logic Device). The proposed controller manages a guidance equipment, motor and I/O sequence controller for a self-control traveling. Compared with a conventional $\mu$-processor, the CPLD controller using a hard-wired control method can reduce a difficult programming process. Also, the total costs of production are reduced, such as development time, product's size and difficulty because memory, combinational logic and sequential logics are implemented by CPLD. The Controller designed using behavioral description method with VHDL and was synthesized by MAX＋Plus II of the ALTERA co. We implemented controller using EPF10K10LC84-4 device.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.842-850
• /
• 2004

We have investigated on the preparation of BaTiO$_3$ powder at the system of BaO$_2$-TiO$_2$-Reduction ag.-PSCA by SHS. C and Mg were used as reduction agent, and NaCl was used as PSCA (Particle Size Control Agent). The effects of the various reduction agent and its concentration, particle size control agent, reaction mixture mass on the product in the preparation of BaTiO$_3$ powder at the optimum system by SHS were investigated. The optimum conditions for reaction system and composition were BaO$_2$+TiO$_2$+0.11 Mg +0.2C+0.75NaCl in the As atmosphere. NaCl as PSCA showed the effect of controlling the particle size of product as well as the combustion temperature. The particle size of BaTiO$_3$ synthesized at the optimum condition was about 0.5 ${\mu}{\textrm}{m}$. And as the mixture mass for the reaction was increased, the more stable combustion wave appeared. We have conducted the sintering experiment at the temperature of 130$0^{\circ}C$, the time of 2 h and the atmosphere of air to measure the dielectric properties of BaTiO$_3$ synthesised in this work, and the sample sintered in this condition showed 2,290 of dielectric constant at 10$0^{\circ}C$ and 13,890 at curie point (129$^{\circ}C$).

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2023

Microfluidic reactors have been made to achieve significant development for the generation of new functional materials to apply in a variety of fields. Over the last decade, microfluidic reactors have attracted attention as a user-friendly approach that is enabled to control physicochemical parameters such as size, shape, composition, and surface property. Here, we develop a centrifugal microfluidic reactor that can control the flow of fluid based on centrifugal force and generate multifunctional particles of various sizes and compositions. A centrifugal microfluidic reactor is fabricated by combining microneedles, micro- centrifuge tubes, and conical tubes, which are easily obtained in the laboratory. Depending on the experimental control param- eters, including centrifuge rotation speed, alginate concentration, calcium ion concentration, and distance from the needle to the calcium aqueous solution, this strategy not only enables the generation of size-controlled microparticles in a simple and reproducible manner but also achieves scalable production without the use of complicated skills or advanced equipment. Therefore, we believe that this simple strategy could serve as an on-demand platform for a wide range of industrial and academic applications, particularly for the development of advanced smart materials with new functionalities in biomedical engineering.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.101-111
• /
• 2006

The SCP girder, which compensates for the shortcomings of conventional girders through the effective composition of concrete, steel, and PS tendon, has recently been developed and applied on real bridges. Developed as a simple-support type, it may be applied on simple-support and continuous bridges by connecting the simple-support SCP girders to the interior supports. A continuous SCP girder, which has structural and cost advantages over the simple-support SCP girder, is proposed in this study. Likewise proposed herein is a new method of constructing a continuous SCP girder, using segments of the girder sequentially. A two-span, half-scale specimen was designed and constructed to verify the propriety of the continuous SCP girder bridge. A static load test was also carried out, using this specimen, to examine the behavior of the continuous SCP girder. Based on the results of the study, it is expected that the continuous bridge that uses the continuous SCP girder can guarantee the structural safety of the simple-support SCP girder.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.285-292
• /
• 2002

One of the problems that should be solved in Text-To-Speech (TTS) is discontinuities at unit-joining points. To cope with this problem, a smoothing method using a low-pass filter is employed in this paper, In the proposed soothing method, a filter coefficient that controls the amount of smoothing is determined according to contort information to be synthesized. This method efficiently reduces both discontinuities at unit-joining points and artifacts caused by undesired smoothing. The amount of smoothing is determined with discontinuities around unit-joins points in the current synthesized speech and discontinuities predicted from context. The discontinuity predictor is implemented by CART that has context feature variables. To evaluate the performance of the proposed method, a corpus-based concatenative TTS was used as a baseline system. More than 6075 of listeners realized that the quality of the synthesized speech through the proposed smoothing is superior to that of non-smoothing synthesized speech in both naturalness and intelligibility.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.150-154
• /
• 2016

Method for synthesizing a $K_2Ti_6O_{13}$ whisker is a solid-state method, hydrothermal synthesis method, calcination method, flux method, slow-cooling method, melting method, kneading-drying-calcination method, sol-gel method etc. $K_2Ti_6O_{13}$ whisker have been synthesized by a flux method. The average size and distribution of the synthesized $K_2Ti_6O_{13}$ whisker can be controlled by a kind of potassium precursors and reaction temperature and time. The average size of the synthesized $K_2Ti_6O_{13}$ whisker was about in the size range of 500 nm to $2{\mu}m$. The effect of synthesis parameters, such as the molar ratio of KOH to $TiO_2$, pH, reaction temperature and time, are discussed. The synthesized $K_2Ti_6O_{13}$ whisker were characterized by x-ray diffraction analysis (XRD), field emission scanning electron microscopy (FE-SEM).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.1
• /
• pp.10-14
• /
• 2008

We synthesized GaN nanowires with high quality using the vapor phase epitaxy technique. The GaN nanowires were obtained at a temperature of $950^{\circ}C$. The Ar and $NH_3$ flow rates were 1000 sccm and 50 sccm, respectively. The shape of the GaN nanowires was confirmed through FESEM analysis. We were able to conclude that the GaN nanowires synthesized via vapor-solid (VLS) mechanism when the source was closed to the substrate. On the other side, the VS mechanism changed to vapor-liquid-solid (VLS) as the source and the substrate became more distant. Therefore, we can suggest that the large amount of Ga source from initial growth interrupt the role of catalyst on the substrate.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.756-763
• /
• 2008

The aim of this work was to obtain uniform and well-dispersed spherical silver nanoparticles using statistical design-of-experiment methods. We performed the experiments using 2 k fractional factorial designs with respect to key factors of a general chemical reduction method. The nanoparticles prepared were characterized by SEM, TEM and UV-visible absorbance for particle size, distribution, aggregation and anisotropy. The data obtained were analyzed and optimized using a statistical software, Minitab. The design-of-experiment methods using quantified data enabled us to determine key factors and appreciate interactions between factors. The measured properties of nanoparticles were dominated not only by individual one or two main factors but also by interactions between factors. The appropriate combination of the factors produced small, narrow-distributed and non-aggregated silver nanoparticles of about 30 nm with approximately 10% standard deviation.