• Title/Summary/Keyword: 함수상태

Search Result 1,792, Processing Time 0.026 seconds

Robust Control of Input/state Asynchronous Machines with Uncertain State Transitions (불확실한 상태 천이를 가진 입력/상태 비동기 머신을 위한 견실 제어)

  • Yang, Jung-Min
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.46 no.4
    • /
    • pp.39-48
    • /
    • 2009
  • Asynchronous sequential machines, or clockless logic circuits, have several advantages over synchronous machines such as fast operation speed, low power consumption, etc. In this paper, we propose a novel robust controller for input/output asynchronous sequential machines with uncertain state transitions. Due to model uncertainties or inner failures, the state transition function of the considered asynchronous machine is not completely known. In this study, we present a formulation to model this kind of asynchronous machines ana using generalized reachability matrices, we address the condition for the existence of an appropriate controller such that the closed-loop behavior matches that of a prescribed model. Based on the previous research results, we sketch design procedure of the proposed controller and analyze the stable-state operation of the closed-loop system.

Evaluation of the Filling Sodium States Inside the Fuel rod of Sodium-Cooled Fast Reactor by Optimized Spatial Resolution in Medical Digital Radiographic Images (의료용 디지털방사선영상의 공간분해능 최적화에 의한 소듐냉각고속로 연료봉 내부의 소듐 충전상태 평가)

  • Seoung, Youl-Hun
    • Journal of the Korean Society of Radiology
    • /
    • v.10 no.2
    • /
    • pp.117-124
    • /
    • 2016
  • The purpose of this study was tried to evaluate the filling sodium states inside the fuel rod of sodium-cooled fast reactor by digital medical X-ray. We used the diagnostic X-ray generators in digital radiography (DR). This study have found the optimal conditions by changing the effective focal spot size of X-ray tube and post-processing of the DR method with a tungsten edge plate in order to ensure excellent sharpness At this time, the sharpness and resolution were evaluated using the MTF (modulation transfer function). As a result, this study obtained a spatial resolution of 3.871 lp/mm (0.1 MTF), 3.290 lp/mm (0.5 MTF) when implemented the contrast strengthen post-processing in small focal spot. In this research, the result is able to evaluate the level of sodium inside the fuel rod by using the diagnostic X-ray generators in medical digital radiographic images.

Resonant Formation Rates of Muonic Molecular ion in Muon-Catalyzed Fusion (뮤온 촉매 핵융합에서 뮤온 분자 이온의 공명 형성율)

  • Im, Ki-Hak;Hong, Sang-Hee
    • Nuclear Engineering and Technology
    • /
    • v.24 no.1
    • /
    • pp.63-74
    • /
    • 1992
  • The resonant formation rates of muonic molecular ion dtr in the muon-catalyzed fusion are calculated in various fuel temperatures and densities. The elastic scattering cross sections between t$\mu$ and deuterons are obtained by making use of the partial wave method. The transition property of the excited compound molecule [(dt$\mu$)dee]* derived by the impulse approximation in the form of a bound-state form factor. The radiative, Auger, and collisional deexcitations are considered as the deexcitation mechanisms of the excited dt$\mu$, and each deexcitation width is calculated as well as back decay width. The resultant reaction widths are used to calculate the formation cross sections of resonant dt$\mu$. The resonant formation rates for dt$\mu$-d and dt$\mu$-t collisions are computed as functions of fuel temperature and density. The calculations show that the resonant formation rates increase with fuel densities and have the maximum values at the particular temperatures where the relative collision energies are equal to the resonant ones.

  • PDF

Optimal Design of Linear Quadratic Regulator Restrict Maximum Responses of Building Structures Subject to Stochastic Excitation (확률적 가진입력을 받는 건축구조물의 최대응답 제한을 위한 선형이차안정기의 최적설계)

  • 박지훈;황재승;민경원
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.5 no.6
    • /
    • pp.37-46
    • /
    • 2001
  • In this research, a controller design method based on optimization is proposed that can satisfy constraints on maximum responses of building structures subject to around excitation modeled by partially stochastic process. The class of controllers to be optimized is restricted to LQR. Weighting matrix on controlled outputs is used as design variable. Objective function, constraint functions and their gradients are computed by the parameterization of control gain with Riccati matrix. Full state feedback controllers designed by proposed optimization method satisfy various design objectives and their necessary maximum control forces are computed for the production of actuator. LQG controllers composed of Kalman filter and LQR designed by proposed method perform well with little deterioration. So it is possible to design output feedback controllers satisfying constraints on various maximum responses of structures.

  • PDF

Input Current Ripple Improvement on Interleaved Boost Power Factor Corrector Operating in Discontinuous Current Mode (불연속 전류모드로 동작하는 Interleaved 승압형 역률보상 컨버터의 입력전류 리플개선)

  • 허태원;박지호;노태균;김동완;박한석;우정인
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.17 no.1
    • /
    • pp.116-123
    • /
    • 2003
  • In this paper, interleaved boost converter is applied as a pre-regulator in switched mode power supply. The pre-regulator plays a role to improve power factor. Interleaved Boost Power Factor Corrector(IBPFC) can reduce input current ripple as a single voltage control loop only without inner current loop, because input current is divided each 50% by two switching devices. Each converter cell is also operated in discontinuous current mode and inductor current of each converter is discontinuous. Total input current which is composed by each converter cell is continuous current. Thus, IBPFC is able to improve input current ripple. IBPFC operating in discontinuous current mode can be classified as six modes from switching state and be carried out state space averaging small signal modeling. A control transfer function is obtained according to the modeling. Single voltage control loop is also constructed by the control transfer function. From experimental result, improvement of power factor and input current ripple are verified.

A Comparison of the Density Functional Theory Based Methodologies for the Triplet Excited State of 𝛑-Conjugated Molecules: Time-Dependent DFT (TD-DFT), TD-DFT within Tamm-Dancoff Approximation (TDA-DFT), and Spin-Unrestricted DFT (UDFT) (𝛑-공액계 분자의 삼중항 여기 상태에 대한 Density Functional Theory (DFT)에 기반한 계산 방법들의 비교: 시간-의존 DFT (TD-DFT), Tamm-Dancoff 근사법을 적용한 DFT (TDA-DFT), 스핀-비제한 DFT (UDFT))

  • Ahn, Chang Hwan;Kim, Dongwook
    • Journal of the Korean Chemical Society
    • /
    • v.63 no.2
    • /
    • pp.73-77
    • /
    • 2019
  • We compared methodologies based on the density functional theory (DFT), e.g., time-dependent DFT (TD-DFT), TD-DFT within Tamm-Dancoff approximation (TDA-DFT), and spin-unrestricted DFT (UDFT), that are usually employed to optimize the geometries of ${\pi}$-conjugated molecules in their lowest lying triplet excited ($T_1$) state. As a model system for ${\pi}$-conjugated molecules, we employed 1,2,3,4,5-pentacyano-6-phenyl-benzene. In conjunction with 6-31G(d) basis sets, we made use of gap-tuned range-separated ${\omega}B97X$ functional which is often employed recently in the calculations of molecular excited states. Near the equilibrium geometries, we found that the important difference between the geometries derived at UDFT level and those at TD-DFT or TDA-DFT methods: more stable ground-state energies but higher triplet excitation energies for UDFT derived geometries. In the studies, we discuss such differences in more detail.

태양계의 물: 기원과 진화

  • Choe, Byeon-Gak;Choe, Hye-Rim
    • 한국지구과학회:학술대회논문집
    • /
    • 2005.09a
    • /
    • pp.3-8
    • /
    • 2005
  • 지구는 현재 태양계에서 액체 상태의 물이 표면에 존재하는 유일한 천체이다. 하지만, 고체 또는 기체 상태의 물은 태양계의 다른 행성이나, 위성, 소행성, 혜성 등에도 풍부하게 존재하고 있다. 풍부한 액체 상태의 물은 지구 표면에서 일어나고 있는 기후의 변화, 해류의 이동, 퇴적 및 침식 작용, 화산활동과 같은 여러 지구과학적 현상에 밀접하게 관여하고 있을 뿐 아니라 생명의 탄생과 진화에도 매우 중요한 역할을 하였다. 현재 지구 표면에 액체 상태의 물이 존재할 수 있는 이유는 태양으로부터의 거리, 지구의 조성 및 크기 등과 관련된 지구 표면의 물리-화학적 조건이 액체 상태의 물이 존재할 수 있는 조건과 일치하고 있기 때문이다. 이와는 달리 지구보다 태양에 더 가깝게 위치하고 있고, 두터운 이산화탄소 대기를 갖고 있어 표면의 온도가 매우 높은 금성의 경우 H2O는 기체 상태로 존재하며, 지구보다 더 멀리 떨어져 있고 희박한 대기를 갖고 있는 화성의 경우에는 현재 H2O가 고체 즉 얼음의 형태로 존재한다. 태양계를 탄생시킨 태양계 성운에서는 압력이 너무 낮아 액체 상태의 물이 존재할 수 없으며, 고온에서는 기체 상태로 매우 낮은 저온에서는 얼음의 형태, 또는 함수 광물 내에 포함되어 존재할 수 있다. 지구와 같은 규모의 행성은 비교적 중력이 작아 태양계 성운의 기체를 거의 끌어들이지 못했다. 따라서 현재 지구에 존재하는 물은 대부분은 고체 상태로 지구에 집적되었을 것이다. 하지만 지구가 탄생한 위치에서 초기 태양계의 온도는 얼음이 형성되기에는 너무 높았기 때문에 좀 더 먼 곳에서(현재의 목성 위치보다 바깥쪽)에서 생성된 얼음 즉, 혜성이 태양계 안쪽으로 들어와 지구에 물을 공급했거나 함수광물을 포함하고 있는 소행성(예를 들어 CI chondrites와 같은 조성의)이 물을 가져왔을 것으로 생각되고 있다.서의 활성화는 어미 변환과 관련된 영역이라기보다는 산출시 관련되는 articulation, motor coordinate관련 영역으로 추정되고, 측두엽의 활성화는 형태소, 의미 관련 지식의 data base로 추정된다. 또한 우반구 전두엽 부분에서 관찰된 활성화는 억제관련 영역으로 짐작된다.러한 동물실험이 그 기초를 제공해 줄 수 있을 것이다. 또한 행동성향 및 기억의 종류에 따른 약물효과의 차이는 기억과 관련된 질병인 알츠하이머 환자에 있어 개개인에게 맞는 적절한 특징적인 치료약물이 존재할 것이라는 가능성을 제공해줄 뿐만 아니라 학습과 기억력 증진 효과를 기대해 볼 수 있을 것이라고 생각된다. 및 지역산업발전의 기획${\sim}$조정기구로서, 선진국의 지역발전기구(Regional Development Agency : RDA)인 지역전략산업기획단이 2002년도부터 산업자원부와 9개 시도에 의해 설립되어 지역네트워크의 활성화와 클러스터의 형성 촉진을 하게 되었고 2004년도에는 13개시도로 확대${\sim}$운영되고 있고, 지역특화사업(H/W)과 지역산업기술개발과제(S/W)와 함께 패케지 형태로 지원되며, 주요역할은 크게 지역산업의 정책기획 분야와 평가관리, 지역혁신역량 조사 및 DB구축 등으로 구분된다. 그중에서도 권역별, 지역별, 지역산업진흥사업 육성과 중장기 산업발전계획을 수립하기 위하여 지역혁신역량을 바탕으로 한 지역 Technology Road Map(TRM)작성사업은 전국공통의 1단계 사업으로 실시 ?榮쨉?, 2005년 3월 기준으로 9개 지역(강원, 대전, 충남, 충북, 경북, 울산, 전남, 전북, 제주) 26개 산업분야를 대상으로 23개가 완료된 상황이다. 이를 근거로 한 지역정책과 R&D 과제 및 필요 인프라의 도출이 체계적으로 구축되어 지역산업 발전을 위한

  • PDF

Seepage Behavior by Artificial Rainfall in Weathered Granite Model Slope (화강풍화토 모형사면의 인공강우 침투거동 해석)

  • Lee, Kumsung;Han, Heuisoo;Chang, Donghun;Yoon, Donggu
    • Journal of the Korean GEO-environmental Society
    • /
    • v.14 no.12
    • /
    • pp.5-12
    • /
    • 2013
  • In this study, weathered granite model tests were performed to investigate the variation of volumetric water content and matric suction by the adsorption and desorption processes of artificial rainfall. It has been compared with numerical analysis in unsaturated condition. As the results, the behaviors of volumetric water content and matric suction were distinguished by the seepage distance separated into higher, middle and lower area, and the drainage layer located at the bottom of the experimental device. In the adsorption process, the instantaneously large change of matric suction and water content were related to the increase of permeability in soil. However, in the desorption process, the change of matric suction and water content were gradually small because of the decrease of permeability. The volumetric water content and matric suction showed the difference according to the seepage distance, however the typical characteristic curves were made by the adsorption and desorption processes.

A Study on the Effects of the Coefficient of Uniformity and Porosity on the Soil-Water Characteristic Curves of Sandy Soils (사질토의 함수특성곡선에 대한 균등계수와 공극율의 영향에 관한 연구)

  • Yoo, Kunsun
    • Journal of the Korean GEO-environmental Society
    • /
    • v.14 no.5
    • /
    • pp.41-47
    • /
    • 2013
  • Well-graded and dense soils have good engineering properties. Unsaturated soil properties such as shear strength, compressibility and permeability are closely related to the soil-water characteristic curve of the soil. Therefore it is important to study the effects of the coefficient of uniformity and the porosity on the soil-water characteristic curve of the sandy soils, which are also related to the grain size distribution and the density of the soil, respectively. In this study soil-water characteristic curves (SWCCs) for six sandy soil specimens were investigated using Tempe pressure cells. The test data were best-fitted to Fredlund and Xing equation. The obtained fitting parameters and the characteristic points of SWCCs were discussed and correlated with the porosity and the coefficient of uniformity of the specimens. The results show that the smaller the porosity of the specimen becomes, the larger the value of the residual matric suction becomes, whereas the larger the coefficient of uniformity of the specimen becomes, the larger the value of the residual matric suction becomes. Regardless of the coefficient of uniformity, the smaller the porosity of the specimen, the flatter the max. slope of SWCC.

Vibration Analysis of Mindlin Plates Using Polynomials Having the Property of Timoshenko Beam Functions (Timoshenko보함수 성질을 갖는 다항식을 이용한 Mindlin판유추 구조계의 진동해석)

  • J.H. Chung;T.Y. Chung;K.C. Kim
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.29 no.1
    • /
    • pp.158-172
    • /
    • 1992
  • In ships and offshore structures, there are many local structures formed of thick plates and/or having the form of double wall panels. For the vibration analysis of such a kind of structures, Mindlin plate theory which includes the effects of shear deformation and rotary inertia is usually adopted. In this paper, the vibration and dynamic sensitivity analysis of Mindlin plates having the boundary conditions elastically restrained against rotation have been accomplished using the Rayleigh-Ritz method. Polynomials having the property of the Timoshenko beam functions are introduced and used as trial functions in the spatial representation of the deflection and rotations of cross sections in two directions of the plates. The results obtained by the introduced polynomials gave nearly the same numerical results as those by the Timoshenko beam functions with the remarkable reduction of computational efforts especially in the dynamic sensitivity analysis.

  • PDF