• Archives of design research
• /
• v.17 no.4
• /
• pp.61-68
• /
• 2004

A great variety of handheld device are coming onto the market. Some have advanced features compacted into very small sized hardware. In order to maximize the capability of these devices, we need to understand the characteristics of different input methods and utilize them in a sufficient way. Our study aims to understand characteristics of each device, so that we can design user interfaces more effectively. Two experiments were conducted to compare target pointing performance with a pen and with a hardware key on small displays. In experiment 1, we examined participants' performance of target pointing with both input methods at different target sizes. It was found that pen operation is more erroneous than key based operation when target size is smaller than 5mm, but at a target size of 5mm, the error rate decreased to the same level as for key input. In experiment 2, we examined the effect of the number of targets. The results showed, with a target size of 5mm, the pen could point to targets quicker than with key input, when the distance to the target exeeds a path length of 3 steps.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.3
• /
• pp.75-82
• /
• 2009

This paper investigates the variation of post-buckling behaviours of spatial structures after sizing optimization with linear assumptions. The mathematical programming technique is used to produce the optimum member size of spatial structures against external load. Total weight of structure is considered as the objective function to be minimized and the displacement occurred at loading point and member stresses of structures are used as the constraint functions. The finite difference method is used to calculate the design sensitivity of objective function with respect to design variables. The post-buckling analysis carried out by using the geometrically nonlinear finite element analysis code ISADO-GN. It is found to be that there is a huge difference between the post buckling behaviours of the initial and optimized structures. Therefore, the stability of optimized spatial structures with linear assumption should be throughly checked by appropriate nonlinear analysis techniques. Finally, the present numerical results are provided as benchmark test suite for future study of large spatial structures.

• Management & Information Systems Review
• /
• v.30 no.3
• /
• pp.217-239
• /
• 2011

The paper explores how corporate payout polish depends on managers' stock-option value. Specifically, this paper examine the relationship between managers' stock-option value and the ratio of stock repurchase, and analyze the relationship between price-incentive intensity of managers' stock-option and the ratio of stock repurchase. The hypotheses mentioned above are empirically tested using 137 firms listed on the Korean Exchange(KRX). OLS and Tobit regression method are used to above hypotheses. The results of this paper are as follows: First, as managers' stock option value increases, future the ratio of stock repurchase increase. Second, as the price-incentives intensity of managers' stock option increases, the patio of stock repurchase also increase. Overall, The above results imply that managers with stock option prefer stock repurchase over cash dividends to increase private benefits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.557-562
• /
• 2018

High molecular weight sodium alginate (HMWSA)/low molecular weight sodium alginate (LMWSA) microcapsules containing phytoncide oil were prepared with different LMWSA contents. The effects of the stirring rate and ratio of HMWSA/LMWSA on the diameter and morphology of the phytoncide/alginate beads were investigated by optical microscopy and the release behaviors of phytoncide oil from the phytoncide/alginate beads were characterized by UV/Vis. spectrophotometry. The mean particle size of the phytoncide/alginate beads decreased with increasing stirring rate and concentration of the calcium chloride solution. The surface morphology of the phytoncide/alginate beads changed from smooth surfaces to skin-like rough surfaces with increasing LMWSA content. These results were due mainly to the increased hydrophilic groups at the bead surface, resulting in an increase in the release rate of phytoncide oil in the phytoncide/alginate beads.

• Journal of Aquaculture
• /
• v.17 no.3
• /
• pp.197-208
• /
• 2004

Five commercially valuable Korean Veneroid, Protothaca jedoensis, Ruditapes philippinarum, Saxidomus purpuratus, Cyclina sinensis and Meretrix lusoria were recognized by comparing internal and external morphological characters. As length of the primary tooth was directly grown proportional to shell size but all other characters were not measured according to size of shell. Hence, the morphological characters of these Veneroids may be estimated from the size of the unique primary tooth and it might be enough to be a good criterion for identification of species among Veneriods. Numerical index of hinge plate length of these species was assessed systematically, irrespective of measuring the length, height and width of the shell. The highest internal and external morphological similarity was observed between P. jedoensis and R. philippinarum and the lowest similarity was observed between P. jedoensis and M. lusoria. These similarities may be affected by multiple environmental factors as well as genetic characters. For artificial seed production of P. jedoensis, R. philppinarum, a closest relative among the five species, must be focussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.119-124
• /
• 2014

In this paper, A GSm/WCDMA band antenna which can be confirmed positioning information of a container by using the GPS/GLONASS bands on one board and can be sent the positioning information to the mobile communication network in real time is designed. A microstrip patch antennas which supports dual-band (GPS and GLONASS) was optimized. The antenna size is $25{\times}25{\times}5[mm]$. A chip monopole antennas which supports dual-band (GSM and WCDMA) was optimized. The antenna size is $27{\times}8{\times}3.2[mm]$. To amplify the Satellite reception signal level, two-stage low noise amplifier(LNA) was designed. The LNA gain is 27[dB]. The size of Jig for antennas measuring is $100{\times}30{\times}1[mm]$.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.11-18
• /
• 2011

In this study, the reinforcing effect of geogrids in the narrow backfill by sand was experimentally studied. In the model tests, the size of space and the slope of the cut off slope were varied out. The resultant and the distribution of lateral earth pressure were measured. Width of backfill space varied 10 cm, 20 cm, 30 cm at the lower wall level and angle of the cut off slope varied $90^{\circ}$, $75^{\circ}$, $60^{\circ}$. Geogrids were installed in the backfill. Measured results showed that the distribution of the lateral earth pressure due to the narrow backfill developed in a arching shape. And the earth pressure was reduced due to the reinforcement of the backfill by geogrid. geogrid helps reduction of lateral earth pressure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.304-304
• /
• 2011

열필라멘트 화학 기상 증착 공정(HWCVD, hot wire chemical deposition)은 낮은 기판 온도에서 다결정 실리콘 박막을 빠른 속도로 증착할 수 있는 방법이다. 이는 후처리가 없어도 전기적 특성이 우수한 박막을 저온에서 얻을 수 있기 때문에 녹는점이 낮은 기판에 증착을 할 수 있으며 공정비용 절감 효과가 있다. 이러한 박막 증착 공정 중 기상 핵생성에 의해 나노 입자가 생성되며, 새로운 관점에서는 그 농도와 크기가 박막 성장에 중요한 변수로 작용한다. 따라서 공정조건의 변화에 따라 생성되는 나노 입자의 크기 분포를 실시간으로 분석하여 박막 형성의 최적 조건을 찾는 연구가 필요하다. 하지만 이러한 입자 발생 특성에 관한 연구는 기존에 밝혀진 반응 메커니즘으로 인해 수치해석적 연구는 체계적으로 진행되었으나 실험적 연구의 경우 적합한 측정장비의 부재로 인해 제한이 있었다. 따라서 본 연구에서는 저압에서 실시간으로 나노입자 분포를 측정할 수 있는 PBMS (particle beam mass spectrometer)를 이용하여 열필라멘트 화학 기상 증착 공정 중 발생하는 입자의 존재를 확인하고 특성을 분석하였다. 실리콘 나노 입자의 측정은 PBMS 장비의 전단 부분을 HWCVD 배기 라인에 연결하여 진행하였으며 반응기 내 샘플링 위치, 필라멘트 온도, 챔버 압력, 작동기체의 비율을 변수로 하여 진행하였다. 그 결과 실리콘 나노 입자는 양 또는 음의 극성을 가진 하전된 상태임을 확인 하였고, 측정 조건에 따라 일부 단일 극성으로 존재하였다. 한편, 필라멘트 온도가 증가할수록 하전된 나노입자의 최빈값은 감소하였다. 또한 반응 가스인 SiH4 농도가 증가할수록 최빈값은 농도에 비례하여 증가하였다. 이런 결과는 기존 HWCVD 실험에서 투과 전자 현미경(TEM)을 이용하여 분석한 실리콘 나노 입자의 크기 분포 결과와 경향이 일치함을 확인하였다. 본 연구를 통하여 확인된 하전된 나노 입자의 존재를 실험적으로 확인하였으며 추후 지속적 연구에 의해 이러한 하전된 나노 입자가 박막 형성에 기여 하는 것을 규명하고 박막 형성 조건을 최적화하는데 중요한 역할을 할 것을 기대할 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.159-161
• /
• 2017

In this paper, we propose an adaptive search range allocation algorithm for high-performance HEVC encoder and a hardware architecture suitable for the proposed algorithm. In order to improve the prediction performance, the existing motion vector is configured with the motion vectors of the neighboring blocks as prediction vector candidates, and a search range of a predetermined size is allocated using one motion vector having a minimum difference from the current motion vector. The proposed algorithm reduces the computation time by reducing the size of the search range by assigning the size of the search range to the rectangle and octagon type according to the structure of the motion vectors for the surrounding four blocks. Moreover, by using all four motion vectors, it is possible to predict more precisely. By realizing it in a form suitable for hardware, hardware area and computation time are effectively reduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.305-305
• /
• 2007

SOFC용 밀봉유리$({\sim}10.0{\times}10^{-7}/K)$의 열팽창 계수를 SUS430$({\sim}12.0{\times}10^{-7}/K)$ 인터커넥터에 매칭 시키기 위하여 모유리에 비하여 열팽창계수가 큰 $CaTiO_3\;({\sim}13.5{\times}10^{-7}/K)$ 입자를 필러로서 첨가하였다. 필러입자의 첨가량이 증가함에 따라 밀봉재의 열팽창 계수가 증가하고, 동일 함량의 필러를 첨가하는 경우 필러 입자의 크기가 작을 수록 밀봉재의 연화점 상승 폭이 커서 SUS430 기판과의 접합 상태가 불량해짐을 관찰하였다. 필 테스트, 접합시험, 미세구조 분석 등을 통하여 필러 입자 크기가 증가 할 수록 SUS430과의 접합이 가능한 범위 내에서 보다 많은 양의 필러를 첨가하는 것이 가능하기 때문에 열팽창 계수 제어가 용이하다는 것을 확인 할 수 있었다.