• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.231-240
• /
• 2017

Recently, there have been frequent occurrences of ground sink in the urban area, which have resulted in human and material damage and are accompanied by economic losses. This is caused by artificial factors such as soil loss, poor compaction, horizontal excavation due to the breakage of the aged sewage pipe, and lack of water proof at vertical excavation. The ground sink can be prevented by preliminary restoration and reinforcement through exploration, but it can be considered that it is not suitable for urgent restoration by the existing method. In this study, a model experiment was carried out to simulate the in-ground cavities caused by groundwater flow for developing non-excavation urgent restoration in underground cavity and the range of the relaxation zone was estimated by detecting the around the cavity using a relaxation zone detector. In addition, disturbance region and relaxation region were separated by injecting gypsum into cavity formed in simulated ground. The shape of the underground cavity due to the groundwater flow was similar to that of the failure mode III formed in the dense relative density ground due to water pipe breakage in the previous study. It was confirmed that the relaxed region detected using the relaxation zone detector is formed in an arch shape in the cavity top. The length ratio of the relaxation region to the disturbance region in the upper part of the cavity center is 2: 1, and it can be distinguished by the difference in the decrease of the shear resistance against the external force. In other words, it was confirmed that the secondary damage should not occur in consideration of the expandability of the material used as the injecting material in the pre-repair and reinforcement, and various ground deformation states will be additionally performed through additional experiments.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.243-248
• /
• 2010

Two suspicious events, which were claimed as underground nuclear tests by North Korea, were detected in the northern Korean Peninsula on October 9, 2006 and May 25, 2009. The KIGAM and Korea-China Joint seismic stations are distributed uniformly along the boundaries between North Korea and adjacent countries. In this study, the data from broadband stations with the distance of 200 to 550 km from the test site are used to analyze and compare two nuclear tests of North Korea. By comparing the time differences of the Pn-wave arrival times of 1st and 2nd tests at multiple stations, the relative locations of two test sites could be calculated precisely. From the geometrical calculation with the velocity of Pn wave $V_{Pn}$ = 8 km/s, the 2nd test site is estimated to move in the WNW direction from 1st one with the distance of 2 km. Body wave magnitude, mb of the 2nd test, which was announced officially as the network average of 4.5, varies widely with the directional location of stations from 4.1 to 5.2. The magnitude obtained from Lg wave, $m_b$(Lg), shows less variation between 4.3 to 4.7 with the average of 4.6. The moving-window spectra of time traces of 1st and 2nd tests show very similar pattern with different scale level. In addition, the corner frequencies of P wave of 1st and 2nd tests at each station show no or negligible difference. This indicates the burial depths of two tests might be very similar. The relative yield amount of the 2nd test is estimated 8 times larger than that of the 1st from the weighted average of ground-velocity amplitude ratios.

• Journal of Korea Port Economic Association
• /
• v.34 no.1
• /
• pp.111-132
• /
• 2018

As China continues to evolve as a major economic power and the Free Trade Agreement (FTA) between the Republic of Korea and China was ratified on June 1, 2015, market volume between the two countries is expected to grow more rapidly. This study aims on improving the efficiency of car-ferry lines. We conducted two surveys- for shippers and forwarders of car-ferry companies, and container liners. The study analyzes the decision factors for delivery companies and their importance for shippers and forwarders of car-ferry companies and container liners. Based on analysis of prior studies on the competition for car-ferry companies and liners, three primary variables are selected-promptness, economics, and safety. The promptness variable consists of shipping time, loading/unloading time, and customs clearing time. The economic variable consists of marine transportation cost from a domestic harbor to China, loading/unloading cost in the harbor, and overland transport cost from the harbor to shippers inland. Finally, the safety variable consists of cargo damage rates, safety facilities, such as lashing and shoring, and punctuality of transportation time. The survey and AHP results show that the promptness, safety, and economics factors are 0.549, 0.309, and 0.142 in the shipper groups of car-ferry companies' category, respectively. It indicates that there is considerable difference in the importance of each factor. In contrast, the factors are 0.350, 0.348, and 0.302 in the forwarders category, which suggests that there is little difference in each factor's importance. As for shippers and forwarders of liners, the importance of each factor is found to be in the following order: economics, safety, and promptness.

• Management & Information Systems Review
• /
• v.33 no.5
• /
• pp.97-115
• /
• 2014

The purpose of this study is to illustrating how the store selection factors affect the customer's satisfaction about the store and the intention of revisit base on the analyzing the store selection factors. At the same time, the difference between the influence on the customer's satisfaction and revisit intention of that in Korea and in China is also compared. Accordingly, through the notional understanding of configuration variables and the investigation of previous research, the Research hypothesis was set and the relevance between the two was inspected. The survey was aimed at the Korean customers who visit the large supermarkets in Korea and Chinese customers who visit the large supermarkets in China. After that, the reliability and validity of the collected data was verified and the research hypothesis was validated by structure equation modeling. The result of this study can by concluded as follows: First, in Korea the customer's satisfaction is showed to be affected by store selection factors, product property, service property and physical environment. Second, in China the customer's satisfaction is showed to be affected by store selection factors, product property, service property and physical environment. Third, in Korea the revisit intention is showed to be affected by customer's satisfaction. Forth, in China the revisit intention is showed to be affected by customer's satisfaction. Fifth, it shows little difference between the store selection factors of the customers visiting large supermarkets in Korea and in China. According to the research results above, the implications can be drawn as the customer's satisfaction of those who visit the large supermarkets may be affected by store selection factors (store property, product property, service property and physical environment). In recent years, more and more overseas large supermarkets are opening in both Korea and China and the competition among each is become more intense day by day. Every larger supermarket is trying their best to refine their store property, product property, service property and physical environment, in order to enhance the customer's satisfaction. The biggest factor that affects the customer's satisfaction and revisit intention in Korea is service property, So that the services requires proper measures and improvement. In China, the factor that affects most on the customer's satisfaction and revisit intention is physical environment. In order to enhance the customer's positive consciousness of stores, the physical environment needs to be well constructed. Lastly, in the compared research between Korea and China, the distribution of survey responders was limited from certain areas. Therefore, the further study can be implemented by more research in various geographical areas and more development in store selection factors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.381-388
• /
• 2017

Purpose: Unpredictable shrinkage of zirconia during sintering process causes discrepancy. Therefore, there have been attempts to reduce discrepancy by milling zirconia after sintering. However, due to the hardness of sintered zirconia, milling takes longer time, causes damage to the machine and causes chip formation. With customized zirconia block using the mean dimension of prepared natural dentition, it is expected to overcome these shortcomings. Materials and methods: The mean dimension of prepared natural dentition was analyzed as STL file after scanning of prepared teeth treated at SNUDH. The transverse, frontal and sagittal planes were set using Mimics and Photoshop. 3D volume was projected on each plane, and the outer line was measured through external tangent line, and the inner line was measured through inflection point of tangent line. Results: The mean height of prepared incisal (N = 57) is $6.60{\pm}1.05mm$, mesiodistal length is $2.98{\pm}0.73mm$, buccolingual length is $2.04{\pm}0.73mm$. The mean height of prepared premolar (N = 15) is $5.37{\pm}1.49mm$, mesiodistal length is $4.10{\pm}1.78mm$, buccolingual length is $5.86{\pm}1.55mm$. And the mean height of prepared molar (N = 13) is $5.11{\pm}1.29mm$, mesiodistal length is $6.80{\pm}1.18mm$, buccolingual length is $7.34{\pm}1.40mm$. Conclusion: Using the mean dimension of prepared natural dentition, it is expected to be able to fabricate customized zirconia block.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.1-7
• /
• 2011

Purpose: The purpose of this study was to investigate the cutting efficiency of coarse grit diamond burs with air-turbine handpiece on natural tooth. Materials and methods: Four groups of coarse grit diamond bur were selected: Komet (A), Shofu (B), Premier (C), and Mani (D). The extracted maxillary central incisors were used, and ten cuts were made on each specimen, using the rotary diamond burs. The surface of each bur was measured at the upper, middle, and bottom of the bur with confocal laser scanning microscope and imaged with SEM. The data were analyzed with one-way ANOVA and t-test at the significance level of 0.05. Results: The surface roughness was measured. At the A diamond bur, the Sa values were $52.93\;{\mu}m$, $48.32\;{\mu}m$, $46.79\;{\mu}m$, $45.06\;{\mu}m$, and $43.43\;{\mu}m$ for control, test 1, 2, 3, and 4 respectively. The Sa values were $50.68\;{\mu}m$, $45.62\;{\mu}m$, $44.41\;{\mu}m$, $44.10\;{\mu}m$, and $42.46\;{\mu}m$ for B diamond bur, $58.02\;{\mu}m$, $55.53\;{\mu}m$, $52.22\;{\mu}m$, $48.26\;{\mu}m$, and $45.36\;{\mu}m$ for C diamond bur, and $50.11\;{\mu}m$, $46.73\;{\mu}m$, $45.46\;{\mu}m$, $42.58\;{\mu}m$, and $41.80\;{\mu}m$ for D diamond bur. Surface roughness after each bur use showed significant changes, but no significant difference was found in surface roughness change between bur systems. Conclusions: Surface roughness in the same bur system showed significant differences after each tooth preparation. However no statistically significant differences were found in surface roughness between bur systems. The SEM images between control and test 4 showed the abraded particles.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.82-89
• /
• 2014

Purpose: The purpose of this study was to observe the change of viscoelastic properties of dental resin cements during polymerization. Materials and methods: Six commercially available resin cement materials (Clearfil SA luting, Panavia F 2.0, Zirconite, Variolink N, RelyX Unicem clicker, RelyX U200) were investigated in this study. A dynamic oscillation-time sweep test was performed with AR1500 stress controlled rheometer at $32^{\circ}C$. The changes in shear storage modulus (G'), shear loss modulus (G"), loss tangent (tan ${\delta}$) and displacement were measured for twenty minutes and repeated three times for each material. The data were analyzed using one-way ANOVA and Tukey's post hoc test (${\alpha}$=0.05). Results: After mixing, all materials demonstrated an increase in G' with time, reaching the plateau in the end. RelyX U200 demonstrated the highest G' value, while RelyX Unicem (clicker type) and Variolink N demonstrated the lowest G' value at the end of experimental time. Tan ${\delta}$was maintained at some level and reached the zero at the starting point where G' began to increase. The tan ${\delta}$and displacement of the tested materials showed similar pattern in the graph within change of time. The displacement of all 6 materials approached to zero within 6 minutes. Conclusion: Compared to other resin cements used in this study, RelyX U200 maintained plastic property for a longer period of time. When it completed the curing process, RelyX U200 had the highest stiffness. It is convenient for clinicians to cement multiple units of dental prostheses simultaneously.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.161-167
• /
• 2015

Sweetpotato [Ipomoea batatas (L.) Lam] grows well in harsh environmental conditions, and is cultivated as one of the top seven food crops in the world. Recently, sweetpotato is drawing interest from people as a healthy food because it is high in dietary fiber, vitamins, carotenoids and overall nutrition value. However, few studies have been conducted on sweetpotato genome sequencing in spite of its importance. This review is aimed at increasing the efficiency of sweetpotato genome sequencing research as well as establishing a base for gene utilization in order to control useful traits. Recently, animal and plant genome sequencing projects increased significantly. However, sweetpotato genome sequencing has not been performed due to polyploidy and heterogeneity problems in its genome. Meanwhile research on its transcriptome has been conducted actively. Recently, a draft of the diploid sweetpotato genome was reported in 2015 by Japanese researchers. In addition, the Korea-China-Japan Trilateral Research Association of Sweetpotato (TRAS) has conducted research on gene map construction and genome sequencing of the hexaploid sweetpotato Xushu 18 since 2014. The Bill & Melinda Gates Foundation launched the 'sweetpotato genomic sequencing to develop genomic tools for Sub-Sahara Africa breeding program'. The chloroplast genome sequence acquired during sweetpotato genome sequencing is used in evolutionary analyses. In this review, the trend of research in the sweetpotato genome sequencing was analyzed. Research trend analysis like this will provide researchers working toward sweetpotato productivity and nutrient improvement with information on the status of sweetpotato genome research. This will contribute to solving world food, energy and environmental problems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.111-121
• /
• 2010

Purpose: This 3D-FEA study was performed to investigate the influence of marginal bone loss pattern around the implant to the stress distribution. Material and methods: From the right second premolar to the right second molar of the mandible was modeled according to the CT data of a dentate patient. Teeth were removed and an implant ($\Phi\;4.0{\times}10.0mm$) was placed in the first molar area. Twelve bone models were created; Studied bone loss conditions were horizontal bone loss and vertical bone loss, assumed bone loss patterns during biologic width formation, and pathologic vertical bone loss with or without cortification. Axial, buccolingual, and oblique force was applied independently to the center of the implant crown. The Maximum von Mises stress value and stress contour was observed and von Mises stresses at the measuring points were recorded. Results: The stress distribution patterns were similar in the non-resorption and horizontal resorption models, but differed from those in the vertical resorption models. Models assuming biologic width formation showed altered stress distribution, and weak bone to implant at the implant neck area seams accelerates stress generation. In case of vertical bone resorption, contact of cortical bone to the implant may positively affect the stress distribution.

• Convergence Security Journal
• /
• v.15 no.6_1
• /
• pp.79-92
• /
• 2015

It is required to expand area of inter-Korean economic cooperation, being limited to non-military field, to military field and then, to positively promote arms control in order to establish foundation for peaceful reunification in Korean peninsula. Reasons why arms control has not been promoted between South and North Korea in the meantime were such original factors as follows; (1) limit of confidence building between the South and the North, (2) functional limit of arms control itself, (3) institutional structural limit between the South and the North, (4) environmental limit at home and abroad. It is necessary to get out from existing frame and to seek a new paradigm in order to overcome above factors and to realize arms control between the South and the North. First, it is required to have prior political dialog at the South-North high-level talks in order to promote arms control and to exercise 'strategic flexibility' during negotiation and promotion process. For this, 'flexible reciprocity' has to be adopted in compliance with situation and conditions. Second, it is necessary to get out from existing principle of 'confidence building in advance and arms reduction later' but to seek the 'simultaneous driving principle of confidence building and arms reduction' as an eclectic approach. Namely, based on reasonable sufficiency, it is required to promote military confidence building and limited arms reduction in parallel, which is a lower level of arms control. Third, as an advisory body of Prime Minister's Office, it is necessary to install an organization exclusively responsible for arms control and to positively handle arms control issue from the standpoint of national policy strategy. If the South-North high-level talks take place, it is necessary to organize and operate 'South-North Joint Arms Control Promotion Board (tentative name)'. Fourth, it is required to exercise more active diplomatic competence in order to create national consensus on necessity of arms control for peaceful reunification and to form more favorable international environment. Especially, it is necessary to think about how to solve nuclear issue of North Korea together in collaboration with international society and how to maintain balance between ROK-US alliance and Sino-Korean cooperation relations.