• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.119-122
• /
• 2010

본 논문에서는 틸팅열차의 안전성 확보 및 운행효율 향상을 위해 "한국형 틸팅열차 신뢰성 평가 및 운용기술개발" 연구과제의 한 분야로 추진된 ATP 차상장치의 설치 및 시운전시험에 대한 내용 및 결과를 제시하고 있다. 한국철도기술연구원에서는 기존선의 속도 향상과 KTX 비수혜지역의 여객 서비스 향상을 위해 틸팅열차를 개발하였으며 개발된 틸팅열차의 신뢰성 평가를 위해 기존에 사용되고 있는 ATS 장치에 의한 10km 주행 시운전 시험을 진행하였다. 국토해양부에서는 KTX가 운행되지 않는 지역인 중앙선 및 충북선을 비롯한 7개 기존 노선을 200km/h 이상으로 고속화하기로 하였으며, 이에 따라 열차제어시스템은 기존의 ATS 장치에서 ATP 장치로 개량하여야 한다. 따라서 틸팅열차에도 ATP 차상장치를 설치하여 운행 적합성을 확인하여야 하기 때문에 한국철도공사의 경부선 및 호남선 ATP 구축사업에 사용된 것과 동일한 ATP 차상장치를 틸팅열차에 설치하여 시험하였다.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.852-858
• /
• 2009

This paper is a study on the reliability management of onboard signaling equipment for the Koran Tilting Train (TTX) to run the existing railway to express railway. For safe running of tilting train which operates at Automatic Train Protection (ATP) and Automatic Train Stop (ATS), a reliability management plan for TTX onboard is proposed for preventing train safety from driver oversight and malfunction by establishing braking curves based on movement authority and speed limit, according to preceding train location and rail conditions. Also, reliability of TTX onboard equipment on the basis of proposed plan was estimated, and actual case studies based on the international requirements IEC 62278 (EN 50126) were provided to verify its reliability.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.127-129
• /
• 2010

본 논문에서는 틸팅열차의 안전성 확보 및 운행효율 향상을 위해 "한국형 틸팅열차 신뢰성 평가 및 운용기술개발" 연구과제의 한 분야로 추진된 ATP 차상장치의 중앙선 시험운행 중 우천시 발생한 이상 속도 현시 현상에 대한 원인 분석 및 조치사항을 제시하고 있다. 현재 한국철도기술연구원에서는 기존선의 속도 향상과 KTX 비 수혜지역의 여객 서비스 향상을 위해 틸팅열차를 개발하였으며, 개발된 틸팅열차의 신뢰성 평가를 위해 약 13만 km 주행 시험운행을 진행하였다. 틸팅열차 중앙선 시험운행 중 실제 약 143km/h로 운행 중이던 열차의 속도는 MMI 상에 최고 167km/h까지 현시 되었다. 이러한 현상은 기관사로 하여금 규정 속도를 준수하여 안전운행을 하는데 어려움을 줄 수 있다. 따라서 이러한 현상의 원인을 찾고 조치하였으며 시험운행을 통해 정상상태로 동작함을 확인하였다.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.520-526
• /
• 2007

본 논문에서는 한국형 틸팅열차의 유지보수 활동을 위해 신뢰성기반유지보수체계를 제안하였다. 열차시스템을 3단계의 교체 부품 단위로 분류하고, 각 단위에 대해 기능블록도를 작성한 후 고장모드 영향 분석을 실시하였다. 각 단위의 심각도를 결정한 후 유지보수 정책을 제안하였으며, 틸팅열차를 위한 유지보수 기준을 정하고, 실제 사례를 제시하였다. 제안된 신뢰성기반유지보수체계는 기존 유지보수 체계와도 호환성을 갖고 있으며, 안전성 향상과 유지보수 활동 효율화에 기여할 수 있다.In this paper, a reliability centered maintenance (RCM) system is proposed to perform maintenance action for Korean Tilting Train. The train system was divided into line replaceable units up to three steps. Functional block diagrams were drawn and failure mode effect analysis for the units was carried out. The criticality of each unit was determined and a maintenance policy was proposed. Maintenance and repair criteria for the tilting train were determined and an example was presented. The proposed RCM system is compatible with the previous maintenance system and contributes to improvement of safety and efficiency of maintenance action.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2534-2540
• /
• 2010

In this paper we propose contents and results on installation and commissioning test for ATP on-board unit, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. In KRRI, we have developed tilting trains for the speed-up of existing lines and for the passenger service improvement where the KTX is not available. And we also make progress the operation trial test at the speed of 10km with the use of ATS units, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. In MLTM, they have decided to accelerate the speed at more than 200km/h for the 7 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should install an ATP on-board unit in tilting trains and verify the operational suitability. Therefore, we have installed and tested the same ATP on-board unit on tilting trains that used in the ATP construction project on Gyeongbu-line and Honam-line.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.329-333
• /
• 2012

In this paper, By the time that the tilting technology is adopted in railway rolling stock, we analyzed quantitatively energy saving by reducing the power consumption with the reduction of the operation time through the speed improvement and suggested the necessity to introduce tilting technology in the domestic rail vehicles. To achieve this purpose, the effect of energy saving by comparing and analyzing the power consumption during the operation by TTX HANVIT 200 and 8200 electric locomotives to pull the trains on the same line was suggested and the efficiency of the main devices was compared and analyzed by measuring the power consumption by a single unit. As the energy saving is the world topic, the studies on reducing energy usage goes on constantly in many areas. In addition, as of the time to improve the conventional tracks to speed up and change the signals, Tilting technology will be contributed to the management environment by enlarging the passengers' demand through the reduction of the operation time and saving energy using the existing infrastructure.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.735-741
• /
• 2007

A turnout system which permits trains to pass from one track to another is a combination of the switch, the crossing, lead rails which are necessary to connect the switch and the crossing, two guard rails and a switch machine for operating the switch. In Korea, it has been planned to adopt the high speed tilting train which is suitable for the circumstance of Korea and operates at the maximum speed of 180 km/h, at conventional lines by the year of 2010. For the present, the prototype of the tilting train has been fabricated, and has undergoing a trial run. In this study, evaluation of noise around the turnout system induced by the tilting train has been implemented through the field measurements.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.692-700
• /
• 2007

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. In the area of wayside structure, the stability of track structure and train run shall be evaluated through the review of impact by increased speed by developed train on track structure. The study thus was intended to evaluate the impact on track while a tilting train is running the curve section, which is vulnerable to accelerated train speed. The analysis of tilting train test running the part of Chungbuk line and Honam line was conducted to identify the impact on existing track performance by tilting train. To identify the movement behavior of each part of track while tilting train, high speed train and traditional train (Mugunghwa and freight train) were running the existing line, wheel load, lateral wheel load, rail bending stress, vertical and lateral displacement of rail and vertical displacement of sleeper were compared and analyzed so as to evaluate the expected impact by tilting train for improving the train speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3911-3916
• /
• 2010

In this paper we describe contents and results on running test for ATP on-board equipment, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. We developed tilting trains for the speed-up of conventional lines and for the passenger service improvement where the KTX is not available. And we made progress the operation trial test in the 120,000 km distance with the use of ATS equipment, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. We decided to accelerate the speed for more than 200km/h with respect to the 6 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should have installed an ATP on-board unit in tilting trains and verified the operational suitability, therefore we installed the same ATP on-board unit on tilting trains as that used in the ATP construction project on Gyeongbu-line and Honam-line, and verified that the function and performance of the installed ATP on-board unit conformed to the tilting trains operation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1696-1697
• /
• 2007

한국형 틸팅열차의 시험평가를 실시하기 위한 상시계측시스템은 크게 두 부분으로 이루어져있다. 하드웨어는 센서 계측용 랙, 계측용 콘솔 Desk, 전원공급 랙, 센서부 및 케이블부로 이루어지며, 소프트웨어는 계측프로그램, 후처리 프로그램, 분석 프로그램 등으로 구성되어있다. 이 중에서 차량 네트워크 신호를 입력받기 위한 TMS 신호 검지시스템은 기존에 개발되어 운용중인 타 시스템과 구별되는 틸팅열차 종합계측시스템만의 장점이라고 할 수 있다.