• 제목/요약/키워드: 한국자동차안전기준

검색결과 154건 처리시간 0.023초

교통사고 정보를 이용한 과실비율 산정 모델 개발 (Development of a Model for Calculating the Negligence Ratio Using Traffic Accident Information)

  • 한음;박기옥;강희진;이요셉;윤일수
    • 한국ITS학회 논문지
    • /
    • 제21권6호
    • /
    • pp.36-56
    • /
    • 2022
  • 국내에서 발생하는 교통사고는 손해보험협회에서 작성한 「자동차사고 과실비율 인정기준」에 따라 과실비율을 산정하며, 이를 통해 보험사의 합의나 판결이 내려진다. 하지만, 과실비율 산정에 있어 분쟁이 빈번하게 일어나고 있다. 따라서, 교통사고 발생 시 경찰공무원에 의해 작성되는 교통사고 정보를 이용하여 「자동차사고 과실비율 인정기준」 상의 교통사고 유형을 신속하게 확인할 수 있다면, 보다 효과적인 대응이 가능할 것으로 사료된다. 이에 본 연구에서는 경찰에 의해 작성된 교통사고 정보를 학습시켜 「자동차사고 과실비율 인정기준」 에서 제시하는 교통사고 유형으로 분류하는 모델을 개발하고자 한다. 특히, 데이터마이닝을 통해 경찰청 교통사고 데이터에서 「자동차사고 과실비율 인정기준」 의 교통사고 유형으로 분류하는 데 필요한 핵심어들을 추출하였다. 그리고, 키워드를 의사결정나무 및 랜덤 포레스트 모델을 통해 학습시켜 교통사고 유형을 도출하는 모델을 개발하였다.

국내 자동차관리법 시행규칙상 제원통보 규정의 효율성 제고를 위한 정비방안 연구 (A Research on Efficient Legislation of the Enforcement Regulation of Management Law of Vehicles focused on Notice Procedure of Specification)

  • 유민상;김재부;편무송;안정학
    • 자동차안전학회지
    • /
    • 제12권1호
    • /
    • pp.46-51
    • /
    • 2020
  • Korea is the only country in the world where the regulation of vehicle homologation has been changed from "Type Approval" to "Self-Certification". But there are some regulations that have not been fully changed, so they became double-regulations. In this research, we find out double-regulations in Self-Certification systems focused on "Specification Notice Procedure", and suggest a proposal of amendment to avoid duplication. Through the research, we can reduce unnecessary requirements about homologation, management of vehicle and administrative procedure significantly.

수소연료전지차량 고압수소용기의 국제기준 동향 및 국내기준 개발방향 (The International Code Trend of High Pressure Hydrogen Cylinder and Establishing Domestic Code for the Hydrogen Fuel Cell Vehicle)

  • 김창종;이승훈;김영규
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.225.2-225.2
    • /
    • 2010
  • 전 세계는 온실 가스의 방출을 줄이기 위하여 기존의 화석연료를 대체할 수 있는 에너지를 찾기 위해 연구개발에 박차를 가하고 있다. 이러한 계속적인 연구에서, 전 세계의 국가들은 태양열, 풍력, 지열 및 수소에너지와 같이 화석연료를 대체할 다양한 가스를 조사해왔다. 대체에너지 중 수소 연료는 실제로 배출가스가 없기 때문에 가장 유망한 대안이라고 할 수 있다. 연료전지자동차용 연료로 수소를 사용하기 위해서는 저장합금, 액체 및 압축 상태로 저장할 수 있다. 이 중 세계 대부분의 자동차 메이커 들은 수소를 압축하는 방식을 채택하고 있으며, 주행거리를 확보하기 위하여 고압상태로 수소가스를 저장하는 방식을 사용한다. 수소연료전지 자동차용으로 고압의 수소를 저장할 수 있고, 자동차에 탑재할 수 있도록 가벼운 용기의 개발이 진행되고 있다. 이 중 Type3와 Type4 형태의 용기가 시범적으로 적용되고 있으며, 이러한 용기의 안전성을 확보하기 위한 기준들이 국 내외에서 개발되고 있다. 현재 국제기준 중 UN ECE의 WG.29에서 선진국들을 중심으로 수소연료전지 자동차용 용기의 안전성 평가를 위한 기준을 개발하고 있다. 본 연구에서는 ISO. 15869의 기술기준에 대한 안전성 분석과 미국의 SAE J2579의 기술 보고서에서 제시한 새로운 개념의 안전성 평가 기법을 기준으로 제정되고 있는 UN ECE WG.29의 draft초안을 비교하고, 향후 수소연료전지 자동차용 용기를 위한 국내기준의 방향을 제시하고자 한다.

  • PDF

국내 이륜자동차 안전기준 개발 : 후사경과 타이어 (The Development of the Korean Motor Vehicle Safety Standards for Motorcycles : Exterior Rear-View Mirror and Tire)

  • 용부중;용기중;신재호;류기현
    • 자동차안전학회지
    • /
    • 제8권3호
    • /
    • pp.16-21
    • /
    • 2016
  • As motorcycles are getting more widely used recently, motorcycle accidents are gradually increased every year. Although most accidents are caused by human factors, the importance of motor vehicle safety standards cannot be underestimated indeed. A variety of regulations related to motorcycle safety have been issued in many countries such as EU, U.S., and Australia, etc. In order to harmonize the international safety standards, it is necessary to develop or enhance the Korean Motor Vehicle Safety Standards (KMVSS) for motorcycles. In this study, motorcycle safety standards for an exterior rear-view mirror and a tire are investigated. Actual test procedures are expected in sequential studies according to the results provided herein. Also, the findings in this paper can be utilized to ensure the KMVSS for a safer driving.

자율주행 자동차 대응 교통안전시설의 정보 제공을 위한 한국형 통합 메시지 셋 설계 방안 연구 (Development of a Korean-version Integrated Message Set to Provide Information on Traffic Safety Facilities for Autonomous Vehicles )

  • 고은정;장혁준;한음;장기태
    • 한국ITS학회 논문지
    • /
    • 제21권6호
    • /
    • pp.284-298
    • /
    • 2022
  • 자율주행 자동차의 원활한 주행을 위해서는 도로상에 설치된 교통안전시설에 대한 정보 취득이 필요하다. 이에 본 연구는 자율주행 자동차에게 교통안전시설에 대한 표준화 된 정보를 제공하려는 방안으로 한국형 통합 메시지 셋 설계 방안을 마련하는 것을 목적으로 하였다. 연구에서는 자율주행 자동차의 주행을 위해 제공되어야 하는 정보에 따라 필요한 교통안전시설을 4가지 기준(법적 근거, 자율주행 자동차에 대한 정보 제공 유무, 중복된 정보 제공 유무, 기준 및 설치 형태의 모호성)에 따라 구분하였다. 주행 시 제공되는 정보의 중요도(12대 중과실, 행동 변화)에 따라 정보 전달의 우선순위를 구분하고, 전달 정보의 분류 코드 형태를 정의하였다. 마지막으로, SAE J2735 준용을 위한 교통안전시설의 정보 위치와 전달 방안을 파악하였다. 본 연구는 향후 자율주행 자동차의 실 도로 주행에 앞서, 일반 운전자 기준으로 설치된 교통안전시설이 자율주행 자동차에게 정보를 제공하는 방안을 제시함으로써 미래 도로의 운영 방안을 마련하였다는 데 의의가 있다.

수소복합재용기 TYPE3에 대한 수압반복 거동 평가 (Evaluation on Behavior of Hydraulic Cycling Test for Type3 Hydrogen Composite Cylinder)

  • 조성민;이승훈;류근준;김영규
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 추계학술대회 초록집
    • /
    • pp.98.2-98.2
    • /
    • 2011
  • 지구 온난화의 원인이 되는 이산화탄소를 저감하며 유해한 배기가스를 배출하지 않는 수소연료전지자동차(FCV)에 대한 관심이 높아지고 있다. 한국가스안전공사에서 현재 구축하고 있는 평가장비는 이러한 수소연료전지자동차용으로 사용되는 고압용기의 수압반복시험 및 밸브류로 구성된 고압수소저장시스템의 단품 및 시스템 평가를 통한 안전신뢰성 검증을 목적으로 하고 있다. 현재 수소연료전지자동차는 차량이나 부품의 시험 방법에 대한 통일된 기준/표준/시험법이 아직 완전하게 정비되어 있지 않고, 시장에서의 도입 제도, 기준 등이 만들어지고 있는 현실이다. 또한 연료로 수소를 사용하는 도입단계에 있기 때문에, 수소용기가 반복압력변동에 따라 어떤 거동을 나타내는지에 대한 실험관련 연구가 미진한 상태이다. 따라서 수소연료전지자동차용 고압수소저장시스템에 대한 내구성, 안전성 확보를 위하여 수소연료전지자동차에서 중요한 부품인 용기에 대한 반복피로시험이 필요하다. 특히 복합재 용기 분야에서 Type3용기에 대한 높은 안전성과 내구성이 보고되고 있지만 실질적으로 얼마나 다른 용기에 비해 높은 성능을 가지고 있는지 국내에서는 체계적으로 검증된바 없다. 따라서 구축된 수압반복 장비를 이용하여 Type3 용기에 대한 수압반복시험을 실시하였으며, 이를 통해 수소용기의 거동을 확인하고자 한다.

  • PDF

SAE Level 3 자율주행자동차의 고장 안전성 정량적 평가 방법 개발에 관한 연구 (Development of Quantitative Methods for Evaluating Failure Safety of Level 3 Autonomous Vehicles)

  • 김두용;이상엽;이혁기;최인성;신재곤;박기홍
    • 한국ITS학회 논문지
    • /
    • 제18권1호
    • /
    • pp.91-102
    • /
    • 2019
  • 자율주행자동차는 고장이 발생하면 큰 위험에 노출되기 쉬우며, 이런 이유로 각국에서는 자율주행자동차가 본격적으로 양산되기 전부터 고장 안전성을 객관화된 기준으로 평가하기 위한 연구에 많은 노력을 기울이고 있다. 특히 레벨3로 불리는 조건부 자율주행자동차는 고장이 발생할 경우 제어권이 운전자에게 이전되어야 하는데 이때에 운전자의 제어 가능성이 충분히 확보되어야 한다. 따라서 본 논문에서는 조건부 자율주행자동차를 대상으로 고장 안전성을 정량적으로 평가할 수 있는 방법에 관한 연구를 수행하였으며, 개발된 방법을 시뮬레이션을 통해 검증하였다. 또한 본 논문에서 제안하는 평가 방법이 고장 안전성을 정량적으로 판단할 수 있음을 확인 하였다.

자동차보험 과실기준 기반 자동차사고유형 체계화에 관한 연구 (A Study on the Classification of the Car Accidents Types based on the Negligence Standards of Auto Insurance)

  • 박요한;박원필;김승기
    • 자동차안전학회지
    • /
    • 제13권4호
    • /
    • pp.53-59
    • /
    • 2021
  • According to the Korean Traffic Accident Analysis System (TAAS), more than 200,000 traffic accidents occur every year. Also, the statistics including auto insurance companies data show 1.3 million traffic accidents. In the case of TAAS, the types of traffic accidents are simply divided into four; frontal collision, side collision, rear collision, and rollover. However, more detailed information is needed to assess for advanced driver assist systems at intersections. For example, directional information is needed, such as whether the vehicle in the car accident way in a straight or a left turn, etc. This study intends to redefine the type of accident with the more clear driving direction and path by referring to the Negligence standards used in automobile insurance accidents. The standards largely divide five categories of car-to-car/motorcycle /pedestrian/cyclist, and highway, and the each category is classified into dozens of types by status of the traffic signal, conflict situations. In order to present more various accident types for auto insurance accidents, the standards are reclassified driving direction and path of vehicles from crash situations. In results, the car-to-car accidents are classified into 33 accident types, car-to-pedestrian accidents have 19 accident types, car-to-motorcycle accidents have 38 accident types, and car-to-cyclist accidents are derived into 26 types.

수소연료전지자동차에 대한 안전기준 고찰 (Study of KMVSS for Hydrogen Fuel Cell Vehicle)

  • 용기중;이광범;권해붕
    • 자동차안전학회지
    • /
    • 제6권2호
    • /
    • pp.72-77
    • /
    • 2014
  • In the ongoing debates over the need to identify new sources of energy and to reduce the emissions of greenhouse gases. Hydrogen has emerged as one of the most promising alternatives due to its emissions from the vehicle being virtually zero. The governments have identified the development of regulations and standards as one of the key requirements for commercialization of hydrogen-fueled vehicles. Regulations and standards will helpful in overcoming technological barriers to commercialization. Developments of a technique for safety assessment of Hydrogen Fuel Cell Vehicle(HFCV) includes four tasks, research for regulation system and policy, hydrogen safety, vehicle operation safety and protection against high-voltage. The objective is to establish a technique for safety assessment and amend safety standards for HFCV and consequently reflect research results to vehicle management policy. We devised safety standards and evaluation techniques with regard to high-pressure gas and high voltage of hydrogen fuel cell vehicle. Korean Motor Vehicle Safety Standards(KMVSS) for HFCV was amended to June 10, 2014. including the results of the safety assessment technology for high-voltage and hydrogen characteristics.