• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_2
• /
• pp.307-313
• /
• 2023

This study conducts the flow analysis on the basis of the impeller RPM of water metering valve. The software used for the flow analysis is STAR-CCM+. In terms of the structure of the metering valve, it has an impeller installed inside, and a metering chamber has inlet and outlet holes. The flow analysis on the water metering valve drew the following conclusions: Regarding the flow field in the valve, the impeller had the highest velocity distribution, and complex flow field was generated in the metering chamber. In particular, since the path between the inlet and outlet holes in the metering chamber and the valve body was narrow, there was a section that had flow field interference. The flow rate and flow coefficient distribution according to the impeller RPM were on the linear increase. Given that, it showed the feature of the valve used for water metering on the basis of the impeller RPM.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.3
• /
• pp.381-387
• /
• 2023

This study conducts the flow analysis on the basis of the impeller RPM of water measuring valve and differential pressure at valve inlet and outlet. The software used for the flow analysis is STAR-CCM+. In terms of the structure of the measuring valve, it has an impeller installed inside, and a metering chamber has inlet and outlet holes. The flow analysis on the water measuring valve drew the following conclusions: The flow rate and flow coefficient distribution according to the impeller RPM and differential pressure were on the linear increase. Regarding the flow field in the valve, the increased differential pressure had the highest velocity distribution, and complex flow field was generated in the measuring chamber. In particular, since the path between the inlet and outlet holes in the measuring chamber and the valve body was narrow, there was a section that had flow field interference. Given that, it showed the feature of the valve used for water measuring on the basis of the impeller RPM.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.81-86
• /
• 2011

Without a special mineral resources in Korea, such as petrochemical industries, electronics and automotive industries to supply the basic material, but remains a key industry locations. Gongjeongsang dealing with hazardous materials, such as a fire or explosion hazard, and from this site sangjonhae safety regulations to protect human and material disaster prevention activities are focused. However, depending on the actual implementation of standardized safety regulations as necessary if not originally intended, proper objectivity and reliability of safety regulations, as well as impaired resulting in a waste of public and private administrative power and petrochemical industries and the competitiveness of the entire drop factor will. Accordingly, this study petrochemical plant is applied to a representative safety regulations, items for their safety are needed and these regulations as being implemented that was identified, according to a study, some of the need for regulation and implementation both in terms of reliability was low.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.383-394
• /
• 2006

In 2005, Giorgetto Giugiaro unveiled the Ferrari GG50 at the 50th anniversary celebration of his design career. Beginning his career at the age of 17, he is a master designer who has achieved design revolution by uniting creativity, design methodology, and technology. He has been awarded a number of international prizes for his exquisite achievements and reputation for car design. Carrozzeria of ITAL DESIGN, founded by Giugiaro, is a company whose ideas combine cutting-edge technology and high quality craftsmanship. Beginning in car design, ITAL DESIGN achieved a positive reputation internationally and, since 1999, has expanded even more rapidly under its new name, ITAL DESIGN-GIUGIARO. The owner of 12 affiliates worldwide, all service systems are buyer-oriented, ensuring the highest level of technical consulting. Beginning with the 1971 Alfa Romeo Alfasud, the 1st major project, more than 100 cars have been designed in the past 35 years, leading to the production or in million cars by major motor companies around the world. Giugiaro has focused on practical performance as well as external beauty in his car design, the best of which enter the mass market. With his philosophy of "I want to be the 1st customer of my design" Giugiaro design invites customer participation and input to meet their needs and demands. Free from the routine, typical image, Giugiaro design has raised the bar for creativity and thinking beyond traditional values and ideologies.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.25-40
• /
• 2001

In order to investigate the degree of heavy metal pollution, 280 urban gully-pot sediments were collected from 13 localities in eastern part of Seoul. The uncontaminated stream sediments were also studied for comparison. A series of studies have carried out concerning the physicochemical characteristics of the sediments and the distribution of Cd, Co, Cr, Cu, Ni, Pb, and Zn. Total metal concentrations of gully-pot sediments and uncontaminated stream sediments were analyzed using acid extraction. After predigestion with $NHO_3$, the sample was digested with mixed acid ($NHO_3$-$HClO_4$). The gully-pot sediments were characterized by very high concentrations of Zn, Cu, Pb and Cr, indicating an anthropogenic contribution of these metals to the sediment chemistry Heavy metal concentrations in the gully-pot sediments were 1-329 times higher than the mean content of metals in the uncontaminated stream sediments, depending on the metals. In particular, the highest mean concentrations of Zn, Cu, Pb and Cr were noticed in the gully-pot sediments from Yeouido, Junggu, Junggu, and Dongdaemungu, respectively. The mean value of total Zn concentration in the business and commercial areas is 2-3.5 times higher than that in industrial areas. This suggests that Zn is mainly derived from automobiles (rubber of automobile tires). The mean concentrations of Cu and Cr are significantly high in the commercial and industrial areas, indicating that industrial activities may cause the accumulation of Cu and Cr in the sediments. The Pb level in gully-pot sediments is comparatively low, due to the use of unleaded gasoline in automobiles since 1987.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.4
• /
• pp.97-115
• /
• 2017

The Purpose of this is to Examine the Effects of Collaborative Relations of Supplier- Buyer, Sustainable Supply Chain Management(SCM) Sctivities, and Collaborative Performance in Automobile-part Companies. The Proposed Research Model is Tested using Structural Equation Modeling for Hypotheses based on the Data Collected from 274 Firms. The Results Indicate that Collaborative Relations of Supplier-buyer Positively Affect Sustainable SCM Activities. In Addition, Sustainable SCM Activities Positively Affects Collaborative Performance. The Results of the Study Show that Collaborative Relations of Supplier-buyer is Positively Associated with Sustainable SCM Activities in both Supplier and Buyer Firms. Sustainable SCM Activities have a Significant Impact on Collaborative Performance in both Parts. In Addition, Collaborative Relations of Supplier-buyer have a Significant Impact on Collaborative Performance of Buyer Firms but Supplier. This Study would Provide Useful Information for Collaboration between Supplier and Buyer to have a Long-term Strategic Relationship on Sustainable SCM Activities, which Impact on Collaborative Performance and Competitive Advantages.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.2
• /
• pp.443-460
• /
• 2012

Technology is closely related to industrial development and various studies have been performed to understand the linked structure for knowledge flow between the technology and industry. The research, however, wasn't carried out to flow for Korea National Research and Development projects. In this study, linked structure for technology-industry was discussed by utilizing patent data performed in actual National R&D using NTIS Information of the national research and development, and then it was analyzed how knowledge flows between the technology and industry are flowing. It should be defined that the individual applications expected by researchers at the start of the research and technology-industry applications actually applied from the research performances after research was completed. As a result, it was confirmed in most projects the flow of knowledge was occurring to predicted industries before the start of the R&D. However, the technology was applied to unexpected industry in three industries such as Y09(medical, precision and optical instruments), Y10(electrical and mechanical equipment), Y11(automotive and transportation equipment). The results of this study will be able to contribute to planning for efficient investment strategy of technology-industry by investigating the technology-industry knowledge flow relations of national R&D projects.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.3
• /
• pp.87-93
• /
• 2015

The accidents caused by drivers while driving are considered as the major causes along with other causes such as conditions of roads, weather and cars. In this study, we investigated the driver's workloads under three different driving conditions (Weather, Driving time zone, and Traffic density) through analyzing biological signals obtained from a car driving simulator system. The proposed method is able to detect R waves and R-R interval calculation in the ECG. Heart rate variability (HRV) was investigated for the time domain to determine the changes in driver's conditions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.27-33
• /
• 2007

The shear spinning has been used to produce thin angled cone of parts, with reduced forming force and enhanced mechanical and surface quality for a good finished part, compared with other method formed parts. So shear spinning technique is used widely in industrial production. Especially shear spinning and flow forming techniques are used frequently in automotive, aerial, defense industry. In this paper, finite element method analysis of shear spinning for a cone shape workpiece is carried out to study effects of forming depth and lead angle on forming force. The axial and radial forces on several forming depth and lead angle conditions are obtained.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.4
• /
• pp.301-308
• /
• 2006

Today's automobiles are changing into miniaturization and light weight for saving natural resources and energies. In order to raise the sufficiency of fuel consumption, new mechanism and components are required. Therefore, the expectations on the new materials are very high. Especially, Al materials are widely used to reduce the motors weight. Al using in automobiles is mostly casting material, and the material is developing rapidly in step with technical innovation. Al die casting has become an important field, as we are turning today's motor into light weight. One of the parts in steering system, valve housing, plays a role to reduce the operating effort of drivers. If valve housing being a part of steering system is produced by gravity casting, the space that manufacturing equipments are installed will be increased, and more energies and workers will be needed.