• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.95-101
• /
• 2017

In this paper, the sizing removal condition for the pretreatment of composite materials is obtained numerically by applying an image processing algorithm and nickel-plated carbon fiber is fabricated by a dry process method to enhance its electromagnetic shielding performance. Sizings that are wrapped in a polymer type material during the manufacturing of carbon fiber should be removed for dry coating. A numerical value, that is the correlation, can be obtained by determining the regular pattern of the carbon fiber in the image taken by a scanning electron microscope (SEM) after the sizing is removed. The application of the proposed numerical method to the SEM image of the fiber after the sizing is removed with solution, compressed air, solution and compressed air (hybrid), showed that this method of eliminating the sizing is superior to the hybrid method. Then, by spreading the carbon fiber roll with the sizing removed, we were able to produce nickel plated carbon fiber by the roll-to-roll sputtering method. The electromagnetic shielding performance of the fabricated 30, 40 and 100 nickel coated carbon fibers was measured. The Korea Advanced Institute of Science and Technology evaluated the electromagnetic shielding performance of the 100 nickel-coated carbon fiber to have a maximum value of 73.2 (dB) and a minimum value of 66.7 (dB). This is similar to the electromagnetic shielding rate of copper and shows that this material can be used as a cable for EV / HEV automobiles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.628-637
• /
• 2017

The automobile industry has developed Advanced Driver Assistance Systems (ADASs) to prevent traffic accidents and reduce the burden for drivers. One example is the Lane Keeping Assistance System (LKAS), which was developed for automotive vehicle systems for safety and better driving. The main system of the LKAS supports the driver while maintaining the vehicle within a lane. LKAS uses a radar sensor and camera sensor to collect information about the vehicle's position in the lane and send commands to the actuator to influence the lateral movement of the vehicle if necessary. Recently, vehicles equipped with LKAS have become commercially available. Test procedures for international LKAS evaluation are being discussed and developed by international committees, such as the International Organization for Standardization and United Nations Economic Commission for Europe. In Korea, an evaluation of LKASs for car safety is being planned by the Korean New Car Assessment Program. Therefore, test procedures should be developed for LKASs that are suitable for the domestic road environment while accommodating international standards. We developed a test scenario for LKASs and propose a formula for obtaining the target relative distance. To validate the methods, a series of experiments were conducted using commercially available vehicles equipped with LKAS.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.38-43
• /
• 2010

The purpose of this study is to secure the basis for judgment on the cause of an accident by analyzing the melting characteristics of a blade type fuse used for vehicles due to overload. In order to increase the reliability of the test, it was conducted by connecting the electrical system with conditions similar to those of an actual vehicle to apply the load. Carbonization pattern experiment of fuse by outside flame applied Korean Standard (KS). The fuse melted by the overcurrent showed a smooth cross-section while the test terminals, clear plastic body, etc., burnt out by the external flame was badly deformed. When 185% of the rated current (27.8A) was applied to a cable of 15A rated current onto which an over-capacity fuse (20A) was installed, the fuse melting time was 217 seconds. In addition, when a load current of 28.8[A] (139%) was applied, the fuse's test terminal and terminal blade were not burnt out although foam was observed on some parts of the plastic body. When a load capacity of 28.2[A] (141%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melting time was approximately 10 seconds. When a load current of 35.8[A] (119%) was applied, the fuse's test terminal and terminal blade were not burnt out, although some parts of the plastic body was swelled. However, it was observed that the switch terminal melted if approximately six minutes lapsed under such conditions. When a load capacity of 39.4[A] (131%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melted in approximately 69 seconds, and the test terminal and terminal blade were not burnt.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.41-47
• /
• 2000

In modern dynamic management environment, there is growing recognition that information & knowledge management systems are essential for CEO's efficient/effective decision making. As a key component to cope with this current, we suggest the management performance data-mining system based on IT(Information Technology). This system measures management performance that is considered with both VA(Value-Added), which represents stakeholder's point of view and EVA(Economic Value-Added), which represents shareholder's point of view. The relationship between management performance and 85 financial ratios is analyzed, and then important financial ratios are drawn out. In analyzing the relationship, we applied the explanation-based Gas(Genetic Algorithms) that consider predictability, understanability (lucidity) and reasonability factors simultaneously. To demonstrate the performance of the system, we conducted a case study using financial data over the 16-years from 1981 to 1996 of Korean automobile industry which is taken from database of KISFAS(Korea Investors Services Financial Analysis System).

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.1
• /
• pp.29-37
• /
• 2013

The purpose of this study is to suggest the potential domestic and international market conditions vehicles for people with disabilities through a review of the literature and internet resources, and to propose a road map developing South Korean vehicles for people with disabilities taking into consideration the current state of domestic and international technology and the usage of the vehicles for people with disabilities depending on the type of disability. The results of the study are as follows: First, vehicles for people with disabilities safety standards of South Korea do not meet the safety standards of developed countries and the technology of development related vehicles for people with disabilities is not as advanced as that of developed countries. Vehicles for people with disabilities installation methods, specifications, features and safety standards should be designed to be more similar to those of Japan and the United States. Second, vehicle modifications for people with disabilities will become more common as measures directed at promoting the welfare of people with disabilities, such as travel and transportation measures, employment opportunities, education, and funding for vehicle modifications, are implemented along with laws, such as The Americans with Disabilities Act, The British Disability Discrimination Act, and Japan's barrier-free transport law, that protect people with disabilities generally. Third, through a comparative analysis of domestic and international market conditions and demands of people with disabilities in vehicle modifications, important things to pay attention by purchasing a modified vehicle for people with disabilities are the employment rate for people with disabilities and monthly income. To enable this, government agencies and industry bodies should work together through the revision of the current Disability Welfare Act or the enactment of the special law for guiding principles of Disability Welfare Act. Through the future changes in vehicles for people with disabilities-related system or society of South Korean, the annual demand of the vehicles is expected to be more than 10,000.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.60-66
• /
• 2021

Various insects live around us. Nowadays, insects are raised as a hobby at home or medicinal insects are bred in large quantities for commercial purposes. In addition, various studies have been conducted to understand the various growth characteristics of insects. In the laboratory, environmental factors were changed to do that, but only the growth characteristics could be analyzed. However, it is almost not easy to measure the skin temperature or body temperature basically needed to reveal the growth characteristics in the case of insects. In particular, the results of experiments on the skin temperature of winged insects are very insufficient. In this study, the skin temperature of insects was photographed and measured for bees and butterflies living in natural conditions under various biological activity conditions such as at rest and during flight using a thermal imaging camera, a non-contact temperature measurement method. Through quantitative analysis of the experimental results, the relationship between the biological activity characteristics of each insect and the skin temperature resulting from such biological activity was investigated. In addition, it was confirmed that honeybees maintained different skin temperatures for three important activities, such as flying, honey collection, and relocation, and that the butterflies performed a warm-up stage for flight similar to the characteristics of moths.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1024-1031
• /
• 2012

In the past, the part of development of that is used for the military aviation target or reconnaissance is being extended to the range of application not only reconnaissance but also civilian industry as the introduction of the newest IT technology and the technical evolution. The Civilian low-cost UAV that is expected growth at the market of UAV in the world is accelerated to the extended applicability in the fields. However, The UAV study is recently focused on the Link and The Data bus because the main decision of the civilian UAV system configuration is not suitable to determinate the factory of price. In this paper is analysed the UAV data bus through the simulation in same condition both the CAN Bus which used the automobile industry and the MIL-STD-1553B which is used the aviation industry. As a comparison result, we identified that the CAN Bus of conventional configuration is possible to transmit the data without the need for a separate coupler equipment against the MIL-STD-1553B data. Thus, we identified that the CAN bus is capable to apply as a low-cost UAV internal data bus to optimize configuration and weight than 1553B.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.259-260
• /
• 2012

산업화가 발달됨에 따라 대기 오염 물질은 점차 증가하고 있는 추세에 있고 특히 기름 및 석탄 연소 보일러, 자동차, 제철, 시멘트 플렌트, 소각로 등은 미세 분진을 발생시키는 주원인이 되어 왔다. 최근 대기환경법은 오염 분진의 중량 규제로부터 $10{\mu}m$ 미만의 PM10에서 $2.5{\mu}m$ 미만의 PM2.5의 미세 분진에 대한 규제로 점차 심화되고 있으나, 이러한 미세분진은 고전적인 제거 방법으로는 매우 어려우며 고가의 HEPA 필터를 사용하여야 한다. 한편 코로나 방전을 이용하는 전기 집진은 미세 먼지 제거에 매우 효율적이어서 $1{\mu}m$ 미만의 미세 분지도 99%까지 제거가 가능하다는 장점이 있지만 입자크기가 클 경우에는 효율이 떨어지는 단점이 있다. 한편 사이클론 집진기는 매우 오래전부터 개발되어 사용되어 왔는데 가격이 저렴하고 운영비가 적게 들며 $10{\mu}m$ 이상의 먼지는 99% 이상 제거가 가능하여 산업현장에서 오랜 기간 사용되어 왔지만 입자크기가 $10{\mu}m$ 미만으로 가면 집진율이 급격히 떨어지는 단점을 가지고 있다. 본 연구에서는 기존의 사이클론 집진기의 구조를 기본으로하여 사이클론 집진기 내부에 플라즈마 방전을 설치하여 원심력에 의한 집진과 코로나 방전에 의한 전기 집진을 동시에 수행할 수 있도록 하이브리드 사이클론 집진기를 제작하였다. 제작된 사이클론 집진기는 직경 30 cm 높이 120 cm의 사이클론 구조를 가지고 있으며 1 hp의 터보송풍기를 장착하여 $20m^3$/min 이상의 유량을 처리할 수 있도록 설계 제작되었다. 제작된 하이브리드 사이클론 집진기의 성능을 평가하기 위하여 $10m^3$의 체적을 가지는 테스트 챔버 내부에 사이클론 집진기를 설치하고 향을 태워 미세 먼지를 발생시킨 후 다양한 조건에서 집진 성능을 측정하여 보았다. 미세 먼지의 경우 사이클론을 작동시키지 않아도 테스트 챔버 벽면에 흡착되어 초기에는 급격히 감소하는 경향을 보여주나 일정 시간이 경과한 후에는 매우 느리게 감소하는 현상이 관찰 되었다. 코로나 방전을 하지 않고 오존 파괴기에 활성탄만 충진한 상태에서 사이크론을 작동시킬 경우 지속적으로 천천히 감소하는 경향을 보여주었으며, 코로나 플라즈마를 방전시킨 경우 미세 먼지는 HEPA filter를 장착한 것보다도 조금 빠르게 미세먼지를 제거하였다. 챔버 내부의 미세먼지가 초기 값의 1/10에 도달하는 시간은 코로나 방전 전류가 증가할수록 짧아지는 경향을 보여주었으며 최적 조건에서 100초 이내에 90% 이상 제거가 가능하였다. 하이브리드 사이클론 집진기는 집진 뿐 만 아리라 VOC 성분도 분해가 가능하여 유해물질을 제거하는 능력이 있다. 유해 가스 제거 능력을 실험하기 위하여 분진제거 실험에 사용된 챔버 안에 아세톤을 증발시켜 50 ppm이 되도록 한 후 다양한 조건에서 유해물질 제거 실험을 수행하였다. 미세먼지와는 달리 장비를 작동하지 않을 경우 매우 느리게 아세톤 농도가 감소하였다. 이는 미세 먼지와는 달리 흡착이 발생하지 않고, 측정 챔버 자체가 완전한 밀폐가 이루어지지 않아 자연적으로 조금씩 외부로 누출되기 때문으로 판단된다. 코로나 플라즈마만 방전시켰을 경우 초기 농도의 80%가 제거되는데 걸리는 시간은 약 28분 정도로 코로나 플라즈마가 VOC 제거에 효과가 있음은 확인하였으나 제거율이 그리 높지 않음을 알 수 있었다. 한편 오존 파괴를 위해 활성탄으로 충진 된 오존파괴기를 통과시킨 경우는 약 12분 경과 후 80%가 제거됨을 확인할 수 있었으나 그 이후에는 VOC의 감소가 매우 느리게 진행됨을 알 수 있었다. 한편 활성탄 대신 $MnO_2$ 복합촉매로 충진 된 오존파괴기를 통과한 경우 약 3분 정도 경과 후 80%의 아세톤이 제거됨을 관찰할 수 있었으며 코로나 플라즈마를 작동시키면서 $MnO_2$ 복합촉매로 충진 된 오존파괴기를 통과시킨 경우 약 2분 정도 경과 80% 이상의 아세톤이 제거되어 코로나 플라즈마와 복합촉매를 사용할 경우 VOC 성분이 효과적으로 제거됨을 알 수 있었다.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.508-517
• /
• 2020

Servitization presents an innovative model to create business value in the automotive industries. This study set out to introduce a servitization model based on the rental business of the tire industry and identify determinants to affect the renewal of contracts around the service types of servitization and the characteristics of customers. Independent variables include the service types, demographics and regions, and inflow channels in 163,742 contracts by case companies in the nation in 2016~2019 with the renewal of contracts as a dependent variable. Correlations between variables were analyzed through cross-tabulation and binary logistic regression analysis. The findings show that the contract renewal rate had positive(+) relations with customized service and negative(-) ones with vehicle maintenance service. There were differences in the contract renewal rate according to such customer characteristics as gender and region, but no clear correlations were found in the age group and vehicle type(domestic/foreign). Of the inflow channels, offline channels tended to have a higher renewal rate than online channels. At open malls, contract renewal increased by 8.4 times due to contract switches at offline channels. Based on these findings, the study discussed directions for practical strategies with regard to the development of new service, implementation of customer-centric servitization, and management of sales channels according to the servitization of manufacturers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.252-256
• /
• 2015

Nitrogen oxides ($NO_X$) was emitted from flue gas of stationary sources and exhaust gas of mobile sources, can leads to various environments problems. Selective Catalysts Reduction (SCR) is the most effective $NO_X$ removal system. Commercial $V_2O_5-WO_3/TiO_2$ catalysts, usually containing $V_2O_5$ 0.5~3 wt%, $WO_3$ 5~10 wt%, and $V_2O_5$ is active in the reduction of $NO_X$ but also in the desired oxidation of $SO_2$ to $SO_3$. To reduce the amount of vanadium, using graphene matrix supported vanadium to synthesize nanocomposite. Then, we fabricated to 1 inch honeycomb type of SCR catalysts adding graphene-vanadium nanocomposite. The chemical-physical characteristics and the catalytic activity were performed by XRD, XRF, BET and Micro-Reactor (MR). As a result, the De-NOX performance was showed, similar to the commercial catalyst activity as 77.8 % and using nanocomposite catalyst as 77.1 % at $350^{\circ}C$.