• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.73-84
• /
• 2003

In this study, the economic pile design procedure using the proof test results was proposed. In order to improve the inappropriate pile design routine, the proof test for 6 pile cases were performed and the construction saving effect were analyzed. The saving rate of construction cost with the small diameter piles and the large diameter drilled shafts were 34 - 47 and 0 - 55 %, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.452-457
• /
• 2008

In this paper, the vibrations of floor systems of which buildings are under construction are studied by experimental and analysis method. The first step is to measure the operational response data and FRF at the supporting points of the utility and the second step is to calculate the dynamic load by TPA Method which provided by LMS VirtualLab System Analysis Module. The dynamics we used to identify is expressed by below equation; $$\{F_{oper}\}=[H]^{-1}\;{\cdot}\;\{{.. \atop x_{oper}}\}$$ Where, H(Transfer function between position of the force and response) and x(response) are measured by vibration test.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.43-55
• /
• 1999

This study evaluated Yasufuku's constitutive model in terms of its capability to accurately consider the observed behavior of Iksan compacted weathered granite soil for various stress-paths. The strains calculated from the model are in reasonable agreement with those measured, but some discrepancies occur. The largest differences between measured and calculated strains occur for axial strain of proportional loading with increasing stress. Yasufuku's constitutive model can consider the observed behavior of Iksan compacted weathered granite soil with accuracy for conventional triaxial compression and for p'-constant loading with increasing stress ratio.

• Journal of the KSME
• /
• v.35 no.6
• /
• pp.468-480
• /
• 1995

항공기구조는 항상 피로하중에 노출되어 있고 조류충돌과 같은 불시의 상황에 의해 손상을 입을 가능성을 가지고 있어서 이에 대한 대비책을 마련하지 않으면 인명과 재산상에 막대한 손실을 초래할 가능성이 있다. 따라서 항공기가 개발되는 초기의 설계단계부터 항공기의 안전성확보가 중요하며, 이를 위해서는 적절한 피로수명예측과 손상허용설계를 해나아가는 것이 중요하며, 그 내용을 정리하면 다음과 같다. (1) 항상 손상의 가능성을 인정하고, 이 손상이 존재하는 경우에도 항공기의 안전이 보장 되도록 설계한다. (2) 손상이 발생하면 쉽게 발견되도록 설계한다. (3) 한 부재의 손상이 전 구조물의 파괴로 이루어지지 않도록 다중하중 경로로 설계한다. (4) 손상의 가능성이 있는 부품은 특별관리한다. (5) 안전균열성장 및 잔류강도 요구조건이 충족되도록 검사계획을 수립하며, 이 검사계획에 따라 검사를 수행한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.46-50
• /
• 1993

The sensitivity study to evaluate the effects of parameters on the fatigue crack propagation life under the constant loadings is executed in the previous study of the authors. It is shown that the effect of the crack opening ratio is large comparatively. The purpose of this paper is to evaluate the effects of parameters on the fatigue crack propagation life under the random loadings. A new method of evaluation of the effective stress under the random loadings is developed. The sensitivity study of parameters on the fatigue crack propagation life under the random loadings is executed by using it.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.1-7
• /
• 2019

Jaw crusher is a device that breaks rock collected from mines or quarries to produce aggregates of the size desired by user. A representative method for measuring load is to measure them by attaching force sensors directly to the part where the load is generated. However, the direct method has many limitations such as high-impact loads generation in equipment or space constraints, sensor capacities and costs. Therefore, Transfer Path Analysis (TPA) was used to indirectly measure impact loads by attaching acceleration sensors. In this study, both direct and TPA methods were used to measure the impact load of Jaw crusher. This study finally quantifies the impact of the load generated by the Jaw crusher using direct method and TPA method, and comparing the impact load measured calculated the derive the error rate.

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.77-84
• /
• 2022

The aims of this study was to estimate transfer force delivered to cone crusher housing and contribution of force transmission. The rock crushing condition caused vibrations in the cone crusher housing, which were experimentally measured, and frequency response functions (FRF) were also found through modal impact tests. Vibration data and frequency response functions were applied to the transfer path analysis (TPA) model. Next, transfer forces delivered to the cone crusher housing were quantified via the TPA method. Contribution of force transfer was also analyzed based on force estimation results. Finally, this study describes basic concepts and components of the TPA method and reviews its applicability to rotating machinery that experiences impact vibrations and forces.

• Geotechnical Engineering
• /
• v.5 no.2
• /
• pp.45-56
• /
• 1989

The influence of stress path on the deformation characteristics of clay has been studied through a series of stress-path controlled triaxial tests on artificially sedimented and normally con- solidated Kaolinite. It has been found that there exists a critical stress increment ratio, Kc, in which stress·strain characteristics possesses a linear relationships and beyond Kc, strain hardening. A modified hyperbolic constitutive model for the strain hardening behavior has been formulated based on the Drnevich's hyperbolic function. And, a method of settlement analyses has been Proposed wherein the effect of stress path during consolidation is taken into account.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.225-233
• /
• 2003

Even though a lot of advanced researches on analysis, design, and performance evaluation of reinforced concrete (RC) under seismic action have been carried out, there has been only a few study on seismic analysis of underground RC structures surrounding soil medium. Since the underground RC structures interact with surrounding soil medium, a path-dependent soil model which can predict the soil response is necessary for analyzing behavior of the structure inside soil medium. The behavior of interfacial zone between the RC structure and the surrounding medium should be also considered for more accurate seismic analysis of the RC structure. In this paper, an averaged constitutive model of concrete and reinforcing bars for RC structure and path-dependent Ohsaki's model for soil are applied, and an elasto-plastic interface model having thickness is proposed for seismic analysis of underground RC structures. A finite element analysis technique is developed by applying aforementioned constitutive equations and is verified by predicting both static and dynamic behaviors of RC structures. Then, failure mechanisms of underground RC structure under seismic action are numerically derived through seismic analysis of underground RC station structure under different seismic forces. Finally, the changes of failure mode and the damage level of the structures are also analytically derived for different design cases of underground RC structures.