• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.682-688
• /
• 2006

In this paper, a soft-decision method for initial PN code acquisition in pilot-channel aided Direct Sequence Code Division Multiple Access (DS-CDMA) systems is proposed in order to improve the acquisition performance. We apply this technique to the conventional hybrid search algorithm and analyze it in terms of mean code acquisition time. For the analysis, we present mathematical model of proposed algorithm and also perform the simulation under IMT-2000 channel models. Numerical results show that our proposed scheme outperforms the conventional one by 0.2 - 0.4 sec with respect to the mean code acquisition time because the soft decision technique can mitigate the possible decline in search performance caused by the use of a hard-decision technique.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.11
• /
• pp.1255-1266
• /
• 2014

This thesis presents MPU module, Base board and sensor module which are efficient industrial control through design and manufacture as developing S5PV210 CPU of SAMSUNG used by ARM Cortex-A8 based on Android which is Open mobile platform is installed to embedded system. Data for temperature and humidity which are received by sensor module proved the suitability and validity for the real time framework design as implementing application program employed the smart phone App with hybrid application based on DB of web server.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.08a
• /
• pp.67-72
• /
• 2008

본 논문에서는 하이브리드 차량 내부 전기모터의 등판 마력값과 회전 RPM, 흡기온도 센서의 온도 변화와 공기 및 연료의 혼합비율인 공연비에 대해 퍼지 제어 기법을 적용하여 차량의 연료 소비를 제어하는 방법을 제안한다. 제안된 기법에서는 초기 가속부분에서 등판 마력간과 회전 RPM을 퍼지제어 규칙에 의해 전기모터와 엔진의 사용비율을 제어하고, 엔진이 가동될 때 각각의 공기유입량과 연료 분사량을 이용하여 공연비 수치를 구한 후, 공연비, 흡기온도, 최종 연료 보정량에 대해 설정된 피지 소속 함수와 퍼지 추론 규칙에 따라 차량 연료를 제어한다. 시뮬레이션을 통하여 실험한 결과, 제안된 퍼지 제어 기법을 이용한 엔진 및 연료 제어 방법이 퍼지기법을 적용하지 않은 제어방법보다 평균연비가 개선되어 제안된 연료 제어 방법이 효율적임을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1133-1139
• /
• 2012

In this paper, hybrid mode beamforming (HMB) which allows simultaneous transmission of joint beamforming and disjoint beamforming is proposed. HMB is proven to be asymptotically optimal beamforming for sum rate growth. Extensive simulations show that HMB achieves nearly the same performance as joint encoding (JE) in symmetric interference channel. It is also shown that it outperforms JE in a more realistic asymmetric interference channel environment, though it still experiences some performance degradation due to power inefficiency of joint beamforming in asymmetric channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.305-310
• /
• 2012

This paper proposes a selection combined hybrid sequential deconvolution and single carrier modulation with a zero forcing frequency domain equalizer for single carrier transmission system in order to enhance performance. Selection combining method is an algorithm of antenna space diversities, the receiver can choose the best channel environment only with the increase of the number of antennas, but a baseband structure is the same as the traditional receiver architecture. Simulation results show that the proposed algorithm has a better performance rather than the traditional single carrier transmission with a frequency domain equalizer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.9-12
• /
• 2007

In this paper, we propose and analyze a scheme for wireless channels, which is a combination of a type I hybrid-automatic repeat request (H-ARQ) scheme and a power ramping. The power ramping is considered for more reliable downlink data transmission, in which the transmission power is gradually changed from a small level to a large level when the number of retransmissions increases. The simulation results demonstrate that, when the power ramping step size is 0.5dB, the average throughput gain may be as high as 2% to 5% with properly selected parameters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2247-2252
• /
• 2008

The SiOC films as the carbon doped silicon oxide film were prepared with the variation of flow rater ratios by plasma enhanced chemical vapor deposition. The samples were analyzed by the fourier transform infrared spectroscopy, I-V measurement and scanning electron microscopy. The samples were shown the chemical shift according to the flow rate ratios, and the grain did not formed at the sample with hybrid properties. The leakage currents decreased according to the increasing of the substrate temperature at the sample with hybrid properties, but the potential barrier increased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.677-684
• /
• 2008

We propose an grid-based research system that replays the experiment by storing and reusing the previous experiment result data in performing remote experiment from a distance. The proposed system was designed for the real-time hybrid test facility which is being built in Korea Construction Engineering Development(KOCED) Project. To provide users with various data, the experiment result data are maintained by the distributed streaming servers based on the publish/subscribe paradigm. Based on the data characteristics of our project, we compared analyzed the performance of the one-streaming-server case and the distributed-multiple-streaming-server case.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.11
• /
• pp.874-880
• /
• 2006

The power density and heat dissipation rate per unit area of the telecommunication equipment have been increased with the technology development in the footprint of telecommunication hardware. A proper heat dissipation method from the PCB module is very important to allow reliable operation of its electronic component. In this study, a hybrid air-conditioner for the telecommunication equipment room was designed to save energy and obtain system reliability. For high outdoor temperatures, the hybrid system operates in the vapor compression cycle, while, for low outdoor temperatures, the hybrid system works in the secondary fluid cooling cycle with no operation of the compressor. The performance of the hybrid air-conditioner was measured by varying outdoor and indoor temperatures. The hybrid air-conditioner yielded 50% energy saving compared with the conventional refrigeration system when the mode switch temperature was $8.3^{\circ}C$.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.109-116
• /
• 2021

Since RDF (Resource Description Framework) triples are modeled as graph, we cannot directly adopt existing solutions in relational databases and XML technology. In order to store, index, and query Linked Data more efficiently, we propose a convergence indexing method combined R*-tree and K-dimensional trees. This method uses a hybrid storage system based on HDD (Hard Disk Drive) and SSD (Solid State Drive) devices, and a separated filter and refinement index structure to filter unnecessary data and further refine the immediate result. We perform performance comparisons based on three standard join retrieval algorithms. The experimental results demonstrate that our method has achieved remarkable performance compared to other existing methods such as Quad and Darq.