• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.646-651
• /
• 2018

This paper reports that the electronic properties at a $P3HT/TiO_2$ interface associated with exciton dissociation and transport can be tailored by the insertion of a graphene quantum dot (GQD) layer. For donor/acceptor interface modification in an $ITO/TiO_2/P3HT/Al$ photovoltaic (PV) device, a continuous GQD film was prepared by a sonication treatment in solution that simplifies the conventional processes, including laser fragmentation and hydrothermal treatment, which limits a variety of component layers and involves low cost processing. The high conductivity and favorable energy alignment for exciton dissociation of the GQD layer increased the fill factor and short circuit current. The origin of the improved parameters is discussed in terms of the broad light absorption and enhanced interfacial carrier transport.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.389.1-389.1
• /
• 2014

최근의 환경 및 에너지에 대한 관심으로 수요가 증가하고 있는 하이브리드 및 전기 자동차나 태양광발전, 풍력발전용의 인버터기기에는 고에너지밀도 커패시터가 필수적이 되었다. 높은 에너지 밀도를 요구하는 전력전자, 펄스파워 등의 응용분야에 사용되는 고에너지밀도 커패시터는 PET (Polyethylene terephtalate)와 PP (Polypropylene)와 같은 폴리머 유전체를 사용하는 범용 필름 커패시터가 사용되었으나 사용 요구 조건의 한계에 도달하여, 새로운 유전체를 적용하는 커패시터가 절실히 필요한 상황이다. PET와 PP와 같은 유전체는 유전상수가 2~3의 낮은 값을 가지고 있어 고에너지밀도를 구현하기가 어렵다. 본 연구에서는 새롭게 요구되고 있는 고에너지 밀도 커패시터의의 성능을 만족시키기 위하여 $20{\sim}50{\mu}m$ 두께의 PET 필름상에 세라믹 유전체인 $ZrO_2$ 박막을 스퍼터(Sputter) 증착법에 의해 코팅하여 종래의 필름 커패시터와 세라믹 커패시터의 장점을 갖는 커패시터를 제조하기 위한 박막 유전재료의 개발을 목표로 하였다. 수백 nm~수 ${\mu}m$ 두께의 $ZrO_2$ 박막을 스퍼터링 공정조건에 따라 증착한 후 박막의 결정성, 기판과의 부착성, 증착속도, 유전상수, 절연파괴강도, 온도안정성 등을 XRD, SEM, AFM, EDS, XPS, Impedance analyzer 등에 의해 평가하였다. $ZrO_2$ 유전체막은 상온에서 증착하였음에도 정방정(tetragonal)구조의 결정질로 성장하였고 증착압력이 증가함에 따라 주피크의 세기가 감소하였다. 증착 중 산소가스를 주입하였을 경우에도 결정질막으로 성장하였다. 증착막들은 산소가스의 양이 증가함에 따라 짙은 흰색으로 변하였으며 PET 기판과의 접착력도 약해졌다. 또한 거칠기는 Ar가스만으로 증착한 경우보다 증가하였으며 24~66 nm의 평균 거칠기값을 보였다. PET위에 Ar가스만으로 증착한 $ZrO_2$의 비유전율은 1kHz에서 116~87의 비유전율을 보여 PET에 비해 매우 우수한 특성을 보였다. $ZrO_2$ 막들은 300kV/cm의 전계에서 대략 10-8A 이하의 누설전류를 보였다. 증착가스비를 달리하여 제조된 시편에서도 유사한 누설전류값을 나타내었다. 300 kV/cm 전후의 전계까지 측정한 $ZrO_2$ 막의 P-E (polarization-electric field) 특성을 확인하였는데, 5 mTorr의 압력에서 증착한 막은 253 kV/cm에서 $5.5{\mu}C/cm^2$의 분극값을 보였다. P-E커브의 기울기와 분극량에 따라 에너지밀도가 달라지므로 공정조건에 따라 에너지밀도가 변화됨을 예측할 수 있었다. PET위에 스퍼터 증착한 $ZrO_2$ 유전체막은 5mTorr의 Ar가스분위기에서 제조할 때 가장 안정적인 구조를 보였으며, 고에너지밀도 커패시터에의 적용가능성을 보였다.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.14-21
• /
• 2006

Tissue engineering techniques require the use of a porous biodegradable/bioresorbable scaffold, which server as a three-dimensional template for initial cell attachment and subsequent tissue formation in both in vitro and in vivo. Small intestinal submucosa (SIS) has been investigated as a source of collagenous tissue with the potential to be used as biomaterials because of its inherent strength and biocompatibility. SIS-loaded poly(L-lactide-co-glicolide)(PLGA) scaffolds were prepared by solvent casting/particle leaching. Characterizations of SIS/PLGA scaffold were carried out by SEM, mercury porosimeter, and so on. Muscle-derived stem cells can be differentiated in culture into osteoblasts, chondrocytes, and even myoblasts by the controlling the culture environment. Cellular viability and proliferation were assayed by 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium-bromide(MTT) test. Osteogenic differential cells were analyzed by alkaline phosphatase(ALP) activity. SIS/PLGA scaffolds were implanted into the back of athymic nude mouse to observe the effect of SIS on the osteoinduction compared with controlled PLGA scaffolds. Thin sections were cut from paraffin embedded tissues and histological sections were conducted hematoxylin and eosin (H&E), Trichrome, and von Kossa. We observed that bone formatioin of SIS/PLGA hybrid scaffold as natural/synthetic scaffold was better thean that of only PLGA scaffold. It canb be explained that SIS contains various kinds of bioactive molecules for osteoinduction.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.46-48
• /
• 2005

이동 컴퓨팅 환경에서 다수의 이동 클라이언트들에게 데이터를 전달할 때는 클라이언트들의 동시 데이터 접근을 지원하는 브로드캐스트 기법을 사용하면 무선 채널 대역폭의 협소함과 클라이언트 측의 에너지 제약과 같은 단점을 해결할 수 있다. 기존 기법들은 클라이언트의 데이터에 대한 접근빈도(access frequencies)와 클라이언트의 에너지 효율(energy efficiency)을 동시에 고려하지 않았다. 따라서 원하는 데이터가 올 때까지 계속해서 채널을 들어야 함으로 인해 에너지 소비를 많이 하거나, 데이터를 얻을 때까지 추가한 많은 양의 정보에 따른 지연이 발생하는 단점이 있다. 본 논문에서는 클라이언트의 에너지 절약을 위한 tuning time을 최소화하고 실제 데이터를 얻을 때까지 소요되는 access time의 효율을 높이기 위해 데이터의 접근빈도와 에너지 효율을 동시에 고려하는 HIDAF: Hybrid Index considering Data Access Frequencies 기법을 제한한다. 제안하는 기법은 트리기반 기법과 해싱기반 기법을 함께 적용하여 구성한 인덱스를 브로드캐스트 주기에 배치한다. HIDAF 기법은 데이터 접근빈도를 고려한 트리기반 인덱스를 배치함으로써 데이터를 얻기 위한 클라이언트들의 평균 access time을 줄일 수 있고, 이러한 인덱스에 해싱기반 기법을 추가함으로써 클라이언트의 에너지 효율을 최소화하는 새로운 브로드캐스팅 기법이다. HIDAF 기법은 브로드캐스트 추기에 데이터의 접근빈도를 고려한 인덱스를 교차로 추가하여 핫 데이터에 대한 클라이언트들의 access time을 줄임으로써 전체 사용자에 대한 평균 access time을 최소화하는 동시에 클라이언트들의 제한된 에너지 소비를 최소화하는데 목적이 있다. 제안기법에 대한 평가는 수학적 분석을 통해 HIDAF 기법과 기존의 브로드캐스트 기법의 성능을 비교 분석한다.하였으나 사료효율은 증진시켰으며, 후자(사양, 사료)와의 상호작용은 나타나지 않았다. 이상의 결과는 거세비육돈에서 1) androgen과 estrogen은 공히 자발적인 사료섭취와 등지방 침적을 억제하고 IGF-I 분비를 증가시키며, 2) 성선스테로이드호르몬의 이 같은 성장에 미치는 효과의 일부는 IGF-I을 통해 매개될 수도 있을을 시사한다. 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다. 첨가하여 제조한 curd yoghurt는 저장성과 관능적인 면에서 우수한 상품적 가치가 인정되는 새로운 기능성 신제품의 개발에 기여할 수 있을 것으로 사료되었다. 여자의 경우 0.8이상이 되어서 심혈관계 질환의 위험 범위에 속하는 수준이었다. 삼두근의 두겹 두께는 남녀 각각 $20.2\pm8.58cm,\;22.2\pm4.40mm$으로 남녀간에 유의한 차이는 없었다. 조사대상자의 식습관 상태는 전체 대상자의 $84.4\%$가 대부분이 하루 세끼 식사를 규칙적으로 하고 있었으며 식사속도는 허겁지겁 빨리 섭취하는 경우가 남자는 $31.0\%$, 여자는 $21.4\%$로 나타났고 이들을 제외한 나머지 사람들은 보통 속도 혹은 충분한 시간을 가지고 식사를 하였다. 평소 식사량은 조금 적게 혹은 적당하게 섭취하는 사람이 대부분이었으며 남자가 여자보다는 배부르게 먹는 경 향이 유의적으로 높았다(p<0.05). 식사는 혼자 하는 경우가 남자

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.347-357
• /
• 2019

The usefulness of processing and analysis systems of GIS-based agricultural climate data is affected by the reliability and availability of computing infrastructures such as cloud, on-premises, and hybrid. Cloud technology has grown in popularity. However, various reference cases accumulated over the years of operational experiences point out important features that make on-premises technology compatible with cloud technology. Both cloud and on-premises technologies have their advantages and disadvantages in terms of operational time and cost, reliability, and security depending on cases of applications. In this study, we have described characteristics of four general computing platforms including cloud, on-premises with hardware-level virtualization, on-premises with operating system-level virtualization and hybrid environments, and compared them in terms of advantages and disadvantages when a huge amount of GIS-based agricultural climate data were stored and processed to provide public services of agro-meteorological and climate information at high spatial and temporal resolutions. It was found that migrating high-resolution agricultural climate data to public cloud would not be reasonable due to high cost for storing a large amount data that may be of no use in the future. Therefore, we recommended hybrid systems that the on-premises and the cloud environments are combined for data storage and backup systems that incur a major cost, and data analysis, processing and presentation that need operational flexibility, respectively.

• Clean Technology
• /
• v.20 no.4
• /
• pp.433-438
• /
• 2014

There is an increasing interest in the development of rechargeable batteries suitable for use in both hybrid electric vehicles and energy storage systems that require higher charge & discharge rates, bigger battery sizes and increased safety of the batteries. Spinel-type lithium titanium oxide ($Li_4Ti_5O_{12}$) as a potential anode for lithium ion batteries has many advantages. It is a zero-strain materials and it experiences no structural change during the charge/discharge precess. Thus, it has long cycle life due to its structural integrity. It also offers a stable operation voltage of approximately 1.55 V versus $Li^+/Li$, above the reduction potential of most organic electrolyte. In this study, Ru added $Li_4Ti_5O_{12}$ composites were synthesized by solid state process. The characteristics of active material were investigated with TGA-DTA, XRD, SEM and charge/discharge test. The capacity was reduced when Ru was added, however, the polarization decreased. The capacity rate of $Li_4Ti_5O_{12}$ with Ru (3%, 4%) addition was reduced during the charge/discharge precess with 10 C-rate as a high current density.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.4
• /
• pp.145-152
• /
• 2018

In electronic textbooks (or e-Textbooks) the traditional paper-based textbooks are enriched with multimedia contents and new features such as interactive multimedia-based simulation, interactive quizzes, and content sharing. It has been envisioned that e-Textbooks will gradually replace the traditional paper-based textbooks in classrooms in the near future. HTML5 is an emerging and promising standard that enables web applications (or apps) to incorporate rich multimedia contents such as video clips, flash movies and simulation-based demonstration, as well as to provide cross-platform functionality which allows the apps to run on a diverse range of platforms. To support rich multimedia contents and cross-platform functionality, with respect to HTML5, this paper presents the new features, compares the current trend of mobile apps (e.g., native, web-based and hybrid apps) for e-Textbook development. In order to investigate the suitability of these three development approaches for e-Textbooks, we present a case study on our recent work in developing e-Textbooks using HTML5 and JavaScript, as well as analyses the challenges associated with HTML5 features (e.g, compatibility with web browsers) for developing e-Textbooks.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.289-295
• /
• 2011

Biomaterials for retinal tissue engineering must demonstrate several critical features for potential utility, including mechanical integrity, biocompatibility, and slow biodegradation. Silk film biomaterials were designed and characterized to meet these functional requirements. We prepared natural/synthetic hybrid silk/PLGA films using 0, 10, 20, 40, and 80 wt% of silk by a solvent evaporation method. MIT assay was used to confirm the number of cells attached on film at 1, 2, and 3 days, respectively. The morphology of cellular adhesion on films was also confirmed by scanning electron microscope (SEM). RT-PCR was conducted to confrrm mRNA expression of retinal pigment epithelitun (RPE) using RPE65 as a RPEs marker and the expression of cytokeratin were determined by immunofluorescence staining. We confirmed that the silk/PLGA film of 20~40 wt% silk was superior for the adhesion and proliferation of RPEs.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.189-195
• /
• 2011

The design of new bioactive scaffolds offering physiologic environment for tissue formation is an important frontier in biomaterials research. In this study, we performed compressive strength, water-uptake ability, and SEM analysis for physical property assessment of 3-D silk/PLGA scaffold, and investigated the adhesion, proliferation, phenotype maintenance, and inflammatory responses of RAW 264.7 and NIH/3T3 for cell compatibility. Scaffolds were prepared by the solvent casting/salt leaching method and their compressive strength and water-uptake ability were excellent at 20 wt% silk content. Result of cell compatibility assay showed that inflammatory responses distinctly decreased, and initial adhesion and proliferation were maximized at 20 wt% silk content. In conclusion, we suggest that silk/PLGA scaffolds may be useful to tissue engineering applications.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.5
• /
• pp.43-59
• /
• 2019

The promotion of social economy is one of the Korean government's top 100 initiatives. As of August 2019, there are 2,249 certified social enterprises in Korea, showing explosive growth with a 41-fold increase from 2007 when the Social Enterprise Promotion Act was first enacted. Currently, the discussion of the sustainability of social-economic organizations is lively, including the issue of changing the certification system to the registration system. Noting the unusual management structure of social enterprise - seeking both social and economic value, this study identifies factors affecting the performance of social enterprises. The study focuses on an empirical investigation of the relationships between characteristics of entrepreneurs' experiences in social economy, strategic competency, the extent to which they seek social value, and their performance. This study is unique in social enterprise research due to its approach to the hybrid management structure of social enterprise with a focus on entrepreneurs' characteristics. Accordingly, this empirical investigation focuses on how social-value seeking mediates the relationships between strategic competency emphasized in typical for-profit enterprises, the characteristics of experiences stressed in social-economic organizations, and the performance of social enterprises. The study findings suggest that, firstly, social entrepreneurs must seek social value as a top priority and improve economic performance using strategic competency to keep pursuing social value, and secondly, social-value seeking must be founded upon entrepreneurs' understanding and experiences in social economy. Practical implications of the study findings include concrete directions for training in social enterprises offered by relevant agencies and the establishment of competency models for current and future entrepreneurs.