• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.1
• /
• pp.14-20
• /
• 2003

Piezoelectric ultrasonic transducers for high temperature contact measurement were developed. These high temperature ultrasonic transducers (HTUT) consisted of bismuth titanate piezoceramic element whose Curie temperature is higher than $600^{\circ}C$, a backing material of the mixture of tungsten powder and inorganic binder, an inner alumina tube, a wear Plate and a housing. The operational frequencies or the HTUT were 1.04 and 2.08 MHz, respectively. Various commercially available couplants for high temperature were evaluated and compared. As a couplant for high temperature ultrasonic testing between HTUT and test specimen, gold epoxy was selected. The peak amplitude of pulse-echo signals from steel test specimen decreased with increasing temperature. The operational temperature of the HTUT reached up to $500^{\circ}C$ at which the continuous contact measurement was possible.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.30-36
• /
• 2009

Various types of ultra-wideband components with 10's of GHz bandwidth have been developed utilizing a uniplanar ultra-wideband balun, which is a simple microstrip-to-coplanar stripline (CPS) transition structure with the operating frequency range from near DC to over 40 GHz. Developed ultra-wideband components include antennas, mixers, doublers, and detectors in a carrier type and in a surface mountable type. One of surface mountable components, for example, single balanced doubler has output frequency 8 ~ 28 GHz. These high-Performance, low-cost ultra-wideband components may replace expensive conventional components, and also can be used to develop new multi-GHz OWE application areas.

• Journal of the Korean housing association
• /
• v.19 no.5
• /
• pp.93-102
• /
• 2008

In Korea, a movement for forming intentional communities is gathering people's interests to improve individualistic living environment, and to create a humanistic lifestyle. However, it is difficult to say if its management is successful or not, because intentional community is just in the experimental stage in Korea. The purpose of this study is to identify actual condition of residents' participation in forming process, shared activities in their daily lives, residents' regulation, common facilities and its management in order to offer basic information for revitalization of intentional communities in Korea. 7 intentional communities including eco-friendly villages, religious communities and a cooperative housing community were collected as the study objects. Upon analysis, those communities were divided into two groups according to their purpose of establishment; "HC (Housing-life focused Community includes cooperative housing community and eco-friendly community)" and "IC (Ideology focused Community includes ideology community and religious community)" in order to identify difference in residents' participation between the two groups. In-dept interviews with representatives of 7 intentional communities by a structured questionnaire were used as study method. The findings of this study are as follows; In general, more active residents' participation is identified in ICs than in HCs. There is no common house, which is considered as essential in intentional community, in HCs, while it was facilitated in all ICs. Role of leader seems more important in ICs than in HCs. About the ownership of housing and land, private owned is common in HCs, while community owned is common in ICs. Shared activities and residents' regulations are evidently less in most HCs than in ICs. Furthermore, in order to run a community sustainable, it is crucial to encourage sense of community among residents, and developing common house and activity programs. Common house design, which can promote proactive residents' participation in shared activity should be studied fitted to Korean circumstances. Above all, proactive participation in the shared activities is one of the most important factors in intentional community.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.135-140
• /
• 2020

An experimental study was conducted using the tracking wheel test (IEC 62217) method for evaluating the performance of insulator materials, in particular ethylene propylene diene monomer (EPDM) and silicone rubber. In addition, we studied the tracking characteristics resulting from applying the same method for the shape of the insulator housing, that is, the performance of regular and alternating sheds. The evaluation parameters were leakage current, surface characteristics, SEM, EDX, hydrophobicity, and temperature distribution; likewise, we applied the commercial frequency dry (and wet) flashover voltage test. We found that the regular shed had a greater leakage current than the alternating shed and that the recovery of the hydrophobicity in terms of rest time was greater than that of the EPDM in terms of leakage current. All of the regular-shed insulators of silicone rubber had tracking traces and choking on the sheath parting line, while the alternating shed showed only choking at the interface but no tracking traces. Therefore, it can be concluded that the commercial frequency wet flashover voltage of the silicone rubber with regular shed before and after the tracking wheel test is higher than that of the alternating shed.

• Journal of Korean Academy of Nursing Administration
• /
• v.11 no.4
• /
• pp.401-414
• /
• 2005

Purpose: This study was to evaluate the utilization of health care service and to provide supportive data for health care policy making in one urban area in Korea. Method: This study tested the significance of public health service using the database of an university hospital and public health center from Feb. 2000 to Dec. 2004. Data were analyzed by multidimensional analysis and data mining technique and produced the information on the classification of utilization characteristics by main disease and the total cost of use and disease association with the users of the public health center. Results: The Results were as follows: 1) Top 10 diseases in the area accounted for 22.4% of total frequency for the most recent 5 years in university hospital, while 59.0% in public health center. 2) There were significant correlations between university hospital and public health center user's insurance type and place of residence: It showed higher use of public health center for free service beneficiaries residing in Seoul than residents in nearby or local area. The medical insurance types for hospital users were more various than those for public health center users. 3) The use of hospital for patients of hypertension, diabetes mellitus and hyperlipidemia was tended to concentrate in mostly autumn and winter since August 2000, while the cost of using public health center for those patients has been steadily reduced since July 2000. 4) As a result of cluster analysis, there were classified into three homogeneous groups according to the total cost of using public health service, age, and the frequency of use. 5) The association analysis on patients with chronic disease in public health center produced a detailed information on accompanying diseases related to the incidence rate of disease of high frequency due to aging, information on drug abuse and immune disease. Conclusion: The health care policy for local community should be evaluated continuously. And the policy to build an integrated data warehousing by public health indicator system and to enhance the faithfulness of data is required.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.820-826
• /
• 2013

In this paper, a compact and wideband CLAS(Conformal Load bearing Antenna Structure) was studied using smart skin technique. In order to satisfy the electrical performance of the CLAS antenna, the proposed CLAS antenna is composed of conductive mesh, face-sheet, radiator, honeycomb, housing. Especially, radiator is composed of composite magneto-dielectric material and radiating element etched on the PCB (Printed Circuit Board). The radiating element is inserted into the composite magneto-dielectric material and has sloted Folded LP(Log Periodic) structure. By fabricated composite magneto-dielectric, the resonance frequency is decreased and the impedance matching characteristics is improved. We verified that the antenna has wideband characteristics and compact size using the antenna test results.

• Journal of KIISE:Software and Applications
• /
• v.26 no.10
• /
• pp.1156-1166
• /
• 1999

의사결정 시스템은 전사적인 의사결정과 전략적 정보수집을 위해 거대한 량의 정보를 빠른 시간내에 제공할 것을 요구한다. 데이타 웨어하우스는 이러한 정보를 신속히 제공하기 위해 여러 지역 데이타베이스로부터 필요한 정보를 사전에 추출하고 가공 및 통합하여 별도의 저장공간에 저장한다. 일반적으로, 웨어하우스 내의 정보는 지역 데이타베이스에 저장된 정보에 대한 실체화된 뷰로서 간주하며 지역 데이타의 변경에 따라 일관성을 유지하도록 반영해야 한다. 본 논문에서는 일관성을 유지하기 위해 정보 공유가 가능한 데이타 웨어하우스 시스템의 구조와 비-보상 실체 뷰 관리 기법을 제안한다. 본 논문에서 제안한 데이타 웨어하우스 시스템의 구조는 지역 데이타베이스에서 추출된 정보를 관리하는 별도의 지역 정보 관리자를 두어 뷰 관리자들 간의 정보 공유가 가능하게 한다. 비-보상 실체 뷰 관리 기법은 지역 데이타 변경 사건에 따른 뷰 관리 시 다른 사건에 의해 영향을 받지 않도록 하기 때문에 기본의 사전 보상이나 나중 보상 기법과는 달리 추가적인 질의 처리를 요구하지 않는 기법이다.Abstract A decision support system(DSS) commonly requires fast access to tremendous volume of information. A data warehouse is a database storing the information that is extracted, filtered and integrated from several relevant local databases to reply upon aggregated queries. The information stored in the data warehouse can be regarded as materialized views. The materialized view has to be modified according to the change of the corresponding local databases to preserve the data consistency. In this paper, we propose a data warehousing system architecture allowing information sharing (DAWINS), and a non-compensating materialized view maintenance algorithm(NCA). DAWINS architecture allows relevant information to be shared by individual view managers with local data manager for each local database. Unlikely to the pre- or post-compensating algorithms, which are required to remove the effects of some events to other view in the process of view maintenance, NCA does not require any additional query processing, since a local data manager in DAWINS already maintains the effects of update events occurring in local systems.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.84-90
• /
• 2010

DBMS is used for a range of applications from data warehousing through on-line transaction processing. As a result of this demand, DBMS has continued to grow in terms of its size. This growth invokes the most important issue of manually tuning the performance of DBMS. The DBMS tuning should be adaptive to the type of the workload put upon it. But, identifying workloads in mixed database applications might be quite difficult. Therefore, a method is necessary for identifying workloads in the mixed database environment. In this paper, we propose a SVM workload classifier to automatically identify a DBMS workload. Database workloads are collected in TPC-C and TPC-W benchmark while changing the resource parameters. Parameters for SVM workload classifier, C and kernel parameter, were chosen experimentally. The experiments revealed that the accuracy of the proposed SVM workload classifier is about 9% higher than that of Decision tree, Naive Bayes, Multilayer perceptron and K-NN classifier.

• Journal of the Korea Convergence Society
• /
• v.2 no.2
• /
• pp.27-34
• /
• 2011

This study is making a product for the development of one process worm wheel of making a shape for gear for worm wheel without hobbing manufacturing process. Because of removing a hobbing process, plastic worm wheel for increased productivity and equivalent quality is produced in the result. As the result, this product is selling to Hyundai Mobis, Mando, TRW, KOYO/NSK/Showa(Japan), Delphai(America). The core technology and different strategy are as follows. The technology protection for molding of worm whee is currently patent process "Molding process of helical gear(No. 10-2008-0105908). Further patent procedure for "molding system for positioning decision of inserting boss is currently prepared. As gear molding procedure in hobbing machine without gear machining procedure, most of all, core development technology which is making a gear tooth is main topic. So that, in case of currently developed worm wheel, because core and mold base are not developed in the first procedure, gear is machining in hobbing M/C as the second procedure. In the later, patent for mold base structure will be prepared in this study results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.221-221
• /
• 2012

최근 진공 산업은 반도체 산업의 급속한 발전과 더불어 진공 산업이 핵심기술로 부각되고 있으며, 진공 산업의 발전이 고부가가치를 창출하는 산업으로 발전하고 있는 추세이다. 이에 (유)우성진공 기술연구소에서는 국내에서 개발이 전무한 소형급 600l/min. 급의 배기속도를 가지는 공랭식 건식진공펌프 개발과 더불어 중소기업 혁신기술 개발사업의 성공적인 수행으로 인해 상용화 단계에 있다. 본 연구에서는 소형(600l/min. 급) 공랭식 건식진공펌프에 개발 과정 및 성능에 대해 소개하고자 한다. 우선, 여타 건식진공펌프와는 달리 냉각방식이 수냉식이 아니라 공랭식 이라는 점에서 에너지 절감 및 설치 공간 제약이 없으며, 유지 비용을 절감할 수 있는 장점을 가지며, 국내에서는 소형급의 건식진공펌프가 없는 관계로 시장성을 높게 평가하고 있다. 소형급 공랭식 건신진공펌프의 냉각효율을 고려하여 하우징을 알루미늄 합금으로 제작을 하였으며, 냉각핀을 적절하게 배치하여 압축열을 효과적으로 방출하기 위한 구조가 될 수 있도록 설계하였고, 냉각팬에 의한 공랭효과를 극대화하기 위해 펌프 스킨을 사용하여 공기 유로를 형성토록 하였다. 또한, 루츠의 형상 및 각 단의 압축효율을 고려한 최적의 로터를 설계하기 위해 Involute Curve를 이용한 3-Lobe형 로터를 설계하였으며, 로터와 로터간의 Clearance를 유지 할 수 있도록 설계하였다. 향후 최적화된 로터 설계기술과 이형재질(알루미늄과 주철)간 열팽창이 고려된 적절한 clearance 유지기술을 적용하여 안정적인 배기속도 600l/min.와 도달진공도 0.005 torr를 가지는 소형 공랭식 건식드라이펌프를 상용화 하고자 한다. 또한 성공적인 과제 종료 및 기술 개발에 따라 건식진공펌프 시장에 신기술 개발 확산에 따른 기업들 간의 기술 경쟁력 촉진을 통한 국가 기술력 향상을 기대해 볼 수 있다.