• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.69-74
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method sum as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kind of sensors sum as three dimensional accelerator, two dimensional tilt sensor, two displacement sensors and azimuth sensor. Using this measuring system(MMS), it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing sum as rolling, pitching, yawing, swaying, heaving, surging under the certain external forces.

• Journal of Korea Port Economic Association
• /
• v.40 no.2
• /
• pp.1-20
• /
• 2024

The purpose of this study is to clarify a safety efficiency of ports in South Korea considering port casualties. The paper conducted a vector auto regression to analyze a cause-and-effect relationship between latent factors and port casualties. Subsequently, the paper evaluated safety efficiency for the ports using an undesirable outputs model. The results implied that the number of workers in the shipping union had a statistical effect on the port casualties. In contrast, the number of workers in the operators and working hours are unrelated to the port casualties. In addition, it was found that Yeosu Gwangyang Port is the most safety efficiency port in South Korea. Based on these results, this paper may provide various policy implications for port operators, developers, and managers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.163-163
• /
• 2016

선박의 대형화 등으로 인한 세계적인 항만들이 하역능력의 제고를 위하여 선박의 대형화, 고속화, 전용선화에 있어 큰 움직임을 보이고 있다. 또한 항만의 연간 작업가능일수 확보를 위하여 신항만 건설시 항 내 정온도 향상을 위하여 최적의 방파제 배치 및 최선의 소파기술에 대한 연구지원을 아끼지 않고 있다. 이뿐 아니라 최근 파랑 수치모형의 정확성이 향상되고 계산시간이 단축됨으로써 각 격자 상에 입력된 수심정보와 입사경계에서의 입사정보 경계면에서의 경계(반사율) 정보로부터 손쉽게 천해파랑 정보를 산출할 수 있게 되었다. 본 연구에서는 스펙트럼을 통해 각각의 파고와 주기를 추출하였으며, 쌍곡선형 완경사 방정식을 수치 해석하여 불규칙파의 설계파를 산정하였다. 또한 Matlab을 사용하여 전 프로그램이 toolbox화 됨으로써 운영하는데 편리하고 특히 다양한 지형의 적용에 용이하게 되었다. Matlab은 다른 언어와 달리 전 프로그램이 vectorizing 되어 계산시간이 상당히 단축되었다. 본 연구를 통해 실무자들이 항만이나 어항 등 연안해역 개발시 유의파고를 사전에 예측하여 연안해역 개발하는 데 큰 도움이 되리라 기대한다.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.87-94
• /
• 2021

The IMO has adopted emission standards that strictly restrict the use of bunker C oil for vessels. Accordingly, research and bunkering pilot projects for LNG fueled ships are being actively carried out, which is expected to substantially reduce environmental pollution. In this study, we have adopted the turret moored Floating LNG Bunkering Terminal (FLBT) designed to receive the LNG from LNGCs and to transfer LNG to LNG bunkering shuttles in ship to ship moored condition. Numerical simulations have been performed with a 1-year return period of wind, wave, and current. Damping values of numerical model were adjusted from the results of model tests to obtain accurate simulation results. The results confirm safe berthing operation during the 1-year return period of environmental condition. Safety depends on the direction of environment, with increasingly stable operation facilitated by the application of heading-control function of FLBT to avoid beam-sea conditions.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.1-7
• /
• 2018

The Continuous Ship Unloader (CSU) is an equipment that unloads freight from the ship docked in the port to the land. And the design target life time is designed to be 30 to 50 years, and it is classified as a semi-permanent large facility. However, cracks may occur due to structural defects, abnormal loads, and corrosion, and fatigue failure may occur before the design life is reached. In this study, we predicted the remaining life time of the main component of the CSU considering crack. And also proposed inspection cycle for maintenance of CSU based on the results of the remaining life time prediction. For this purpose, the structure, operational stresses of the CSU were analyzed and main members were selected. And tensile tests and fatigue crack propagation tests were performed with SM490YA and SM570TMC, which are used as main materials for CSU.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.70-75
• /
• 1997

This paper concerns with a safe and efficient transportation method of hot-coils on cargo ship. An automatic loading and unloading system of hot-coils by cassettes, which secure the geometrically unstable cargo, hot-coil, by supporting with wedges on both sides, is considered efficient and profitable. Safety of hot-coil on cassette and subsequently safety of total cargo ship are directly affected by the wedge angle of cassette. For optimal design of the cassette wedge angle, a dynamic model of hot-coil/cassette cargo is developed with constraint of no relative motions between the coil and the cassette. Force equilibrium conditions between resultant alternating inertia forces on hot-coil due to motions of cargo ship in waves and reactions forces from cassette wedge surfaces are derived and consequently a numerical simulation code is implemented. Cassette wedge angle of 37 degree is taken as optimal by considering dynamic stability of hot-coil and strength of cassette structure. Performance of the designed cassette wedge angle is investigated by scaled bench test.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.25-33
• /
• 2011

Workers in logistics centers also are exposed to serious musculoskeletal disorders the same as workers in general manufacturing due to operating forklifts and other labor duties. The frequency of these work related injuries decreases, workers' job satisfaction In addition, it causes many employees questioning a job change, which is regarded as the primary factor which drops the productivity. In this paper, we conducted a survey ti perceive the correlation between work related injuries in the fields of distribution centers and job satisfaction. Furthermore we made statistical analysis with our findings. The results of our analysis showed that the frequency of work related injuries due to workers' repetitive loading and unloading work is the primary factor which lowers job satisfaction. In order to improve aforementioned problem we propose first of all loading and unloading on pallet basis, second of all automation and computerization of logistics systems, and third of all ensurinf sufficient break time.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.143-143
• /
• 2017

산업이 고도화됨에 따라 자동화 기계 및 로봇에 의해 대량 생산 되는 품목과 달리, 작업 절차의 비정형성, 비연속성 등으로 인해 여전히 농업에 많은 인력이 투입되고 있다. 국제노동기구에 따르면, 세계 인력의 절반이 농업 인력에 해당하고 작업 중 부상이나 사망 등으로 인해 가장 위험한 직업군 중 하나에 해당하는 것으로 나타났다. 시설 재배 농업의 경우, 노동집약적인 온실 내 작업 특성상 잘못된 자세로 작업하거나 지나친 작업량 등으로 인해 작업자에게 근골격계 질환이 발생할 수 있다. 근골격계 질환으로 인해 작업효율이 감소하거나 생산비용의 증가로 이어질 수 있으며, 농가 수익에 손실이 발생할 수 있다. 이에 본 연구에서는 현행 시설 재배 농업에서 사용되는 레일 전동 작업차를 이용하여 작업자가 토마토를 수확할 때의 신체에 대한 농작업의 부하를 평가하고자 하였다. 작업차를 이용한 주요 작업 절차는 작물로부터 과실 수확, 과실 상자에 과실 투입, 빈 과실 상자와 가득 찬 과실 상자의 교대, 작업차 위의 과실 상자를 운반용 파레트에 하역하는 순서로 이루어지는 것을 확인하였다. 비디오장비로 촬영된 일련의 농작업 과정을 OWAS, RULA, REBA와 같은 체크리스트형 인간공학적 작업 부하 평가 도구를 이용하여 평가한 결과, 기존 레일 전동 작업차를 이용한 농작업의 근골격계 질환 유발 가능성을 확인하였다. 동작별 위험성을 토대로 근골격계 질환 유발 가능성이 높아 개선이 필요한 농작업 동작을 선정하였다. 선정된 동작은 실험실 내 환경에서 피실험자를 통한 모의 동작의 생체 신호 계측을 통해 신체 부하 정도를 정량적으로 측정할 수 있으며, 보조가 필요한 신체 부위를 특정하거나 안전성 확보가 필요한 동작에 대한 증거가 될 수 있다. 본 연구를 통해 향후 토마토 온실 내 신선도 유지를 위한 레일 전동 작업차의 개발에 작업자의 안전과 효율성 향상을 위한 인간공학적 설계를 적용할 수 있을 것으로 기대한다.

• Journal of Korea Port Economic Association
• /
• v.34 no.1
• /
• pp.111-132
• /
• 2018

As China continues to evolve as a major economic power and the Free Trade Agreement (FTA) between the Republic of Korea and China was ratified on June 1, 2015, market volume between the two countries is expected to grow more rapidly. This study aims on improving the efficiency of car-ferry lines. We conducted two surveys- for shippers and forwarders of car-ferry companies, and container liners. The study analyzes the decision factors for delivery companies and their importance for shippers and forwarders of car-ferry companies and container liners. Based on analysis of prior studies on the competition for car-ferry companies and liners, three primary variables are selected-promptness, economics, and safety. The promptness variable consists of shipping time, loading/unloading time, and customs clearing time. The economic variable consists of marine transportation cost from a domestic harbor to China, loading/unloading cost in the harbor, and overland transport cost from the harbor to shippers inland. Finally, the safety variable consists of cargo damage rates, safety facilities, such as lashing and shoring, and punctuality of transportation time. The survey and AHP results show that the promptness, safety, and economics factors are 0.549, 0.309, and 0.142 in the shipper groups of car-ferry companies' category, respectively. It indicates that there is considerable difference in the importance of each factor. In contrast, the factors are 0.350, 0.348, and 0.302 in the forwarders category, which suggests that there is little difference in each factor's importance. As for shippers and forwarders of liners, the importance of each factor is found to be in the following order: economics, safety, and promptness.

• Journal of Korea Port Economic Association
• /
• v.26 no.2
• /
• pp.58-81
• /
• 2010

The economic appraisal of a port remodeling project must be transparent and persuasive to the public over the entire stage of the project. A project evaluator need to be familiar with the guidelines on evaluation, and to do his best to follow the guidelines to evaluate the given project. To make the right decision on investment, the evaluator must take into consideration not only economic efficiency, but also equity issues such as income redistribution and balanced development between regions. Port remodeling projects tend to produce externalities to the environment. However, these externalities are of qualitative nature, and hard to measure in monetary terms, so these are liable to be ignored in the process of project evaluation. Two different approaches - RP(revealed preference) and SP(stated preference) have been tried to assess the value of these non-market goods. Government authorities need to set minimum guidelines which project evaluators must follow in order to make the evaluation more reliable.