• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.3
• /
• pp.217-225
• /
• 2001

Any fracture passing through the socket of a teeth is compounded intraorally, even if the fracture is not displaced and the tooth is firm in its socket. Before the advent of antibiotic therapy the danger of infection in a compounded fracture posed severe problems in treatment. Infection is reduced by antibiotic therapy but prolonged use of antibiotics is not justified in an attempt to save a tooth which might eventually be sacrificed. There is still controversy in the management of third molar in mandibualr angle fracture, particulary in regard to their retention or removal at the time of fracture treatment. So we surveyed the 159 patients who were treated with open reduction of mandibular angle fracture containing third molar in fracture line, and compared with the postoperative infection rate depending on time intervals between injury and operation, eruption state of third molar, non-extraction or extraction of third molar related to eruption state, non-extraction or extraction of third molar related to condiition of third molar and its surrounding periodontium and were to propose treatment guidline of third molar in mandibular angle fracture The results obtained were as follows : 1. There were no statistical significance between the time from injury to operation and postoperative infection. 2. There were no statistical significance between eruption state of third molar and postoperative infection. 3. In case of retention of the third molar, there were no statistical significance between eruption state of third molar and postoperative infection, but in case of extraction, postoperative infection was high rate in complete impacted cases. 4. There were no statistical significance between non-extraction or extraction of third molar and postoperative infection depending on condition of third molar. There are no difference in infection rate statistically according to the time from injury to operation, eruption state and condition of third molar, but retention of third molar revealed lowered infection rate in completely impacted cases. By terms of the manegement of third molar, we should extract or preserve third molar in the line of the mandibular angle fracture according to possibility of infection.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.70-81
• /
• 2009

Statement of problem: The position and length of cantilever influence on the stress distribution of implants, superstructure and bone. In edentulous mandible, implant-supported cantilever prostheses that based 4 or 6 implants between mental foramens has been attempted. Excessive bite force loaded at cantilever prosthesis causes bone resorption and breakage of superstructure prosthesis around posterior implants. To complement the cantilever length of conventional prosthesis, In 1992, (McCartney) introduced "cantilever-rest-implant" and Malo reported "All-on-Four" in 2003. Purpose: Analyze and compare the stress distribution of conventional cantilever prostheses with rest implant and All-on-$Four^{TM}$ implant prostheses. Material and method: The external loads(300 N vertically, 75 N horizontally) are applied to first molar area. The stress value, stress distribution and aspect of stress dispersion are analyzed by three-dimensional finite element analysis program, ANSYS ver. 10.0. Results: 1. The rest implant and "All-on-Four" implant system are superior to conventional cantilever prostheses to reduce stress on the bone and the superstructure around implants. 2. The rest implant was of the greatest advantage to stress distribution on bone, implant and superstructure. 3. With same number of implants, distally tilted implants are preferred to conventional cantilever prostheses for reducing the length of cantilever.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.296-305
• /
• 2013

For the purpose of evaluating the prevalence of malocclusion and self-esteem in adolescents, 1,380 middle-school students in the Yangsan area were surveyed by oral examination and questionnaires and the obtained results were as follows: The distribution of 1st molar occlusion by Angle's classification was 69.0, 19.4, 10.6% for Class I, II and III respectively. In the horizontal relationship, the prevalence of normal overjet and crossbite was 86.9% and 5.6% respectively whereas larger and extremely larger overjet was found in 6.6% and 0.8%. In the vertical relationship of anterior teeth, normal, deep overbite and openbite was shown in 94.1%, 4.7%, and 1.2%. For the midline discrepancy, the distribution of groups with 0~1 mm, 2~4 mm and over 5 mm was 98.2%, 1.4%, and 0.4%. Crowding only in the maxilla was found in 9.6%, while that only in the mandible and in both arches was 14.1% and 24.1% respectively. Spacing only in the maxilla was seen in 3.0%, while that only in the mandible and in both arches was 2.4% and 1.7% respectively. Significant difference in self-esteem was revealed in female and malocclusion groups of crossbite and openbite(p < 0.05).

• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.73-84
• /
• 2003

This study was performed to find out how much projection errors in the cephalometric measurements were made by vertical head rotation in taking posteroanterior cephalograms. 25 adults without any apparent facial asymmetry or severe sagittal skeletal discrepancy were selected and the posteroanterior cephalograms were taken with the head rotated $5^{\circ},\;10^{\circ}$ superior and inferior each to the reference $position(0^{\circ})$. The 7 height, 5 width and 6 angular measurements were taken at each 5 positions. Through the statistical analysis of all measurements taken at each rotated position, folowing results were obtained.1. The projection errors of height measurements were remarkably target than those of width or angular measure nents. f. Among the height measurements, the farther to the rotation axis the measurements were, the larger the projection errors were. 3. Among the width measurements, mandibular width and mandibular width of mandibular first molars showed significant differences between the values taken at each rotated position, while nasal width, maxillary width and intermolar width of maxillary first molars did not. 4. Among the angular measurements, the angle between horizontal reference line and the line that is connected to crista galli and antegonion or maxillare showed significant differences between the values taken at each rotated Position. The above results suggest that it is needed to the effort to keep constant head position for taking the useful posteroanterior cephalogra, because projection errors are caused by vertical head rotation.

• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.260-271
• /
• 2007

The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.539-549
• /
• 2009

The purpose of this study was to investigate the prevalence of dental caries, periodontal status, and self-perceived oral health status of students in juvenile protection education institutions. The subjects of this study were 342 adolescents aged 13-20 years detained in two juvenile protection education institutions located in Gyeonggi Province. The study involved an oral examination to record decayed, missing, filled teeth and index teeth with bleeding, calculus, or periodontal pocket, combined with a questionnaire to investigate self-perceived oral health status. The main findings are as follows. 1. When compared with the result of National oral health survey, the students detained had more decayed teeth, DMFT, and teeth with bleeding, calculus, and shallow pocket than general population of the same age. 2. Female students showed more DMFT, more teeth with healthy periodontium, and fewer teeth with shallow pocket than male students (p<0.05). 3. Female students perceived their health to be poorer than male students (p<0.05). A majority(79.2%) of detainee valued their oral health in their life. 4. A majority(71.5%) of detainee reported their dental anxiety, and more female adolescents showed dental anxiety than male adolescents(p<0.05).

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.189-195
• /
• 2004

The purpose of this research is to evaluate and compare the plaque removal ability of sonic brushing and manual brushing in order to present a method for continuous and effective oral hygiene control during orthodontic treatment. Nonextracted adolescent patients (male: 23 persons, female: 37 persons) and adult patients (male: 15 persons, female: 45 persons) outfitted with a fixed orthodontic appliance from their incisors to second molar, in both the maxilla and mandible, were divided into manual brushing and sonic brushing groups. A Philips oral healthcare HX-4401 sonic toothbrush was used, and the application of brushing for the two groups was standardized at two minutes. After brushing, the plaque score was measured with a modified Wilkin's PHP. The following results were achieved after comparing each group's plaque score. 1. In patients with a fixed orthodontic appliance when age was not accounted for, the application of sonic brushing exerted a beneficially decreased effect on the plaque score. (adolescents : p<0.01, adults: p<0.05) 2. When comparing the adolescent and adult groups in regard to plaque score, the adolescent group showed a more decreased effect. 3. When using the same toothbrush type, there was no difference between the adolescent and adult groups.

• The Journal of the Korean dental association
• /
• v.50 no.9
• /
• pp.566-573
• /
• 2012

Purpose : This study evaluated the impact of the presence and aspect of mandibular third molars to the mandible angle fracture or condyle fractures in Korean. Materials and Methods : A retrospective study was designed for patients attending the division of Oral and Maxillofacial Surgery, Kang-dong sacred heart hospital for treatment of mandibular fracture from January 2006 to September 2010. The primary variable was the presence of mandibular third molar and the secondary variable was the aspects of third molar impaction. Mandibular third molars were classified by the impaction depth and the available space as Pell & Gregory system. Outcome variables were the presence of mandibular angle fracture or condyle fracture. Also the source of trauma, age, sex were studied. Hospital charts, radiographs were used for study. Statistic analysis was done with descriptive statistics, the X2-test, linear-by-linear association. P value under 0.05 was considered significant statistically. Results : The number of involved patients was 86. The ratio of male to female patients was about 9:1 for angle fracture and 7:3 for condyle fracture. The most common source of trauma was assault for angle fracture and fall down for condyle fracture. The presence of mandibular third molar increased frequency of angle fracture and decreased condyle fracture with larger impaction depth. But available space of mandibular third molar did not show high association with angle or condyle fractures. Conclusion: Preventive extraction of mandibular third molar is recommended for patients with high risk of angle fracture. Male patients at their third decade or martial artists, police officer could be the case. But it is not recommended for patients with low risk of angle fracture and high risk of condyle fracture relatively. Elder female patients without any symptom on their third molar could be the case.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.61-68
• /
• 2007

The purpose of this study was to compare the centering abilities of four root canal instrument systems and the amounts of dentin removed after root canal shaping using them. The mesial canals of twenty extracted mandibular first molars having $10-20^{\circ}$ curvature were scanned using X-ray micro-computed tomography (XMCT)-scanner before root canals were instrumented. They were divided into four groups (n = 10 per group). In Group 1, root canals were instrumented by the step-back technique with stainless steel K-Flexofile after coronal flaring. The remainders were instrumented by the crown-down technique with Profile (Group 2), ProTaper (Group 3) or K3 system (Group 4). All canals were prepared up to size 25 at the end-point of preparation and scanned again. Scanned images were processed to reconstruct three-dimensional images using three-dimensional image software and the changes of total canal volume were measured. Pre-and post-operative cross-sectional images of 1, 3, 5, and 7 mm from the apical foramen were com pared. For each level, centering ratio were calculated using Adobe Photoshop 6.0 and image software program. ProTaper and K3 systems have a tendency to remove more dentin than the other file systems. In all groups, the lowest value of centering ratio at 3 mm level was observed. And except at 3 mm level, ProTaper system made canals less centered than the other systems (p < 0.05).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.6
• /
• pp.420-425
• /
• 2009

Purpose: The aim of this study is to analyze the correlation between incidence of mandibular angle fracture and eruption state of mandibular third molar using clinical and radiographic findings. Materials and Methods: The data were obtained from the clinical and radiographic records of 205 patients who visited the Department of Oral and Maxillofacial Surgery, Chonbuk National University Hospital for treatment of the mandibular fracture. Panoramic radiographies were taken for radiographic examination and the mandibular third molars were classified according to age, gender, position and eruption state. Data were analyzed by a chi-square statistics. Results: In this study, the incidence of mandibular angle fracture had a tendency to be greater when a mandibular third molar was present(p>0.05), but there was not a statistically significant difference. Of the 255 cases with a mandibular third molar, 67 had an angle fractures. Of the 155 cases without a mandibular third molar, 138 had not angle fracture. And the incidence of mandibular angle fracture was high at class BII(by Pell & Gregory system)(p<0.05). Conclusion: Although there was not a statistically significant difference, mandibular third molar was more susceptible to mandibular angle fracture. When the reduction of mandibular angle fracture, it was recommended that mandibular third molar should be extracted especially in case of pericoronitis, periodontitis and other infections.