• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.327-337
• /
• 2016

The purpose of this study is for size suitability and fitness improvement for Korean 20's women. This study has classified hip types of 20's women by the 6th Korean Anthropometric Survey(Size Korean), then compared their lower body-type by hip types each other. The results are as follows. Factor analysis in sorting hip types can be explained 77.72% by nine factors. And cluster analysis can be divided into three types. Type 1 is referred to as a general type which has the largest size in the 'Hip circumference', but the buttocks's horizontal sizes are in the middle size besides the hip line. Type 2 is referred to as a protruding type in upper buttocks which is large in protruding volume of upper buttocks, but the buttock's horizontal sizes are small including 'Hip circumference', and buttock's horizontal section form close to circle. Type 3 is referred to as a type which is contrary to Type 2. Type 3 is small in protruding volume of upper buttocks, but large in lower buttocks, and the protrusions in whole buttocks are small, so the side view of Type 3 made gentle fit shape. By these results, the study could classify lower body of 20's women, and it can be basic data for new sizing systems and pattern development of bottoms.

• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.835-845
• /
• 2015

This study aims to suggest the proper ease for slim-fit jackets according to the number of buttons from a one-button jacket to four-button jackets for men in their 30's. The researchers carried out both an appearance evaluation and movement functionality evaluation. The results are as follows: When conducting the appearance evaluations, meaningful differences were found. The one-button jacket showed high scores for the 7.5 cm ease. The two-button jacket and the three-button jacket showed high scores for the 10.5 cm ease. The four-button jacket showed a high score for the 13.5 cm ease. Next, the results of the movement functionality evaluation showed the same trend; as the ease was increased from 7.5 cm to 13.5 cm, the scores increased. This is because if the garments offer more ease, this gives room for actions. Additionally, it showed that if there were fewer jacket buttons, then the results showed a high score. The researchers believe that if the number of jacket buttons is lower, then the area of the V-zone increases, so that there is more room for movement. The study suggests a proper chest ease of 7.5 cm for the one-button jacket, 10.5 cm for the two-button jacket and three-button jacket, and 13.5 cm for the four-button jacket, respectively.

• Fashion & Textile Research Journal
• /
• v.18 no.1
• /
• pp.71-79
• /
• 2016

This study aims to suggest the proper neck-width of slim-fit jackets according to numbers of jacket buttons from an one-button jacket to a four button jacket for men in their 30's. The researchers carried out both an appearance evaluation and a movement functionality evaluation. When analyzing the appearance evaluation, there were meaningful differences. The one-button jacket showed a high score on the back-neck width of +2.4cm. The two-button jacket and the three button jacket showed a high score on the back-neck width of +1.4cm. The four-button jacket showed a high score on the back-neck width of +0.4cm. The result of movement functionality evaluation was not related to the appearance evaluation, and showed no meaningful difference. The one-button jacket and two button jacket showed high scores on the back-neck width of +2.4cm. The three button jacket showed a high score on the back-neck width of +1.4cm. The four-button jacket showed a high score on the back-neck width of +0.4cm. In analyzing both results, the study suggests that the proper front neck-width and that of the back-neck width of +2.4cm be for the one-button jacket, the back-neck width of +1.4cm be for the two-button jacket and the three-button jacket, while the back-neck width of +0.4cm be for the four-button jacket.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.21-28
• /
• 2017

Indirect evaporative cooling, which utilizes a cooling effect obtained by the evaporation of water, is energy-effective compared to the conventional vapor compression method. It is also eco-friendly, due to the non-usage of CFC refrigerant. In this study, three indirect evaporative cooler samples of the cross flow type(size: $300mm{\times}300mm{\times}300mm$, channel pitch: $5mm{\times}5mm$, $5mm{\times}7mm$, $7mm{\times}7mm$) were made using plastic/paper composites. Tests were conducted to measure indirect evaporative efficiencies and pressure drops. Results showed that the efficiency was the highest for the $5mm{\times}5mm$ sample, owing to the largest surface area. The saved electrical energy was also the greatest for that sample. The pressure drop of the wet channel was larger than that of the dry channel as expected. A theoretical model was proposed, which underestimated both the indirect evaporation efficiency and the pressure drop.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.706-713
• /
• 2015

Graphite foams (GFs) were prepared by adding different amounts of mesophase pitch (MP) into polyvinyl alcohol-acrylic acid (PVA-AAc) solution followed by the heat treatment. It was confirmed that the pore diameters of GFs were controlled by the slurry concentration, which was the mesophase content added in polymer solution, and their thermal conductivity and compressive strength were also controlled by porosities of GFs formed at different conditions. The resulting GFs in this study had the highest thermal conductivity of $53.414{\pm}0.002W/mK$ and compressive strength of $1.348{\pm}0.864MPa$ at 0.69 in porosity. The thermal conductivity of MP based GFs increased approximately 23 times higher than that of using isotropic pitch based GFs due to the developed graphitic structure.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.275-284
• /
• 2014

This study aims to suggest the patternmaking method of men's slim-fit four-panel jacket sloper in their 30's. The researcher collected four kinds of existing slopers and carried out appearance and movement evaluations twice. Then the researcher's sloper was developed by modifying and supplementing the existing sloper with high scores in the evaluations. The results are as follows: First, when comparing the existing slopers, ease on the chest varied from 13 cm to 17.8 cm. Actual measurements or formula method were used for the armhole depth, waist line, and hip line. It was one-third of armhole length for the sleeve cap height in most existing slopers. Second, the researcher's sloper had excellent scores in the appearance and movement evaluations (front neck depth, ease on the chest, front dropped length, ease on the sleeve cap, and the position that separate the two piece sleeves on the back). Third, the suggested sloper, has 13~14 cm for ease in the chest circumference and 2.5 cm for front dropped length. It sets to chest/4+2 cm for armhole depth, height/4+1 cm for waist line placement, and height/8 for hip length. The sleeve cap height is one-third of armhole length. These results will be useful when the industrial technical designers develop various jacket patterns.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.77-87
• /
• 1997

PFO(pyrolized fuel oil) and $C_{10}^{+}$ oil, which are the residual heavy oils form a NCC(naphtha cracking center), were heat-treated to produce the precursor-pitch for carbon materials. After PFO was initially distilled near $300^{\circ}C$ to separate the volatile matters recovering as high-quality fuel oil, the residuum of nonvolatile precursor-pitch was then thermally pyrolized in the temperature ranges from $350^{\circ}C$ to $450^{\circ}C$. Spinnable isotropic pitch with the softening point of $200^{\circ}C$ and the toluene insolubles of 36wt% was obtained at $365^{\circ}C$, and then was successfully spun through a spinneret(0.5mm diameter). After spinning, an isotropic carbon fiber of $25{\mu}m$ diameter was obtained via oxidation and craboniation procedures. Mesophase spherules began to be observed from the product pitch pyrolized at $400^{\circ}C$, and bulk mesophase with a flow texture was observed above $420^{\circ}C$. In the case of $C_{10}^{+}$ was the feed was polymerized in the presence $H_2SO_4$ at room temperature to increase the molecular weight and then heat-treated gradually up to $200{\sim}250^{\circ}C$. The products obtained with the softening point of $80{\sim}190^{\circ}C$ were carbonized at 500 and $1000^{\circ}C$ to examine the morphology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.310-320
• /
• 2020

BTS has established itself as a leading Korean popular music group in the global mainstream music market. In addition, BTS's fashion style is receiving so much attention that it is featured in the social networks of foreign media and the public. The purpose of this study considers BTS' fashion trends based on the analysis of their fashion styles. The methods and scope of this study have been combined with theoretical studies related to the fashion impact of BTS and BTS, as well as content analysis studies based on the image of BTS over the last five years. The results of this study are as follows. First, it was found that they pursue classic and modern styles through suits that emphasize straight silhouettes, the use of achromatic colors, and simplified decorations. Second, it has been shown that BTS prefers a casual style of free-spirited and comfortable sensibility by matching a jacket with a round shoulder line, toned-down skinny jeans, hood T-shirts, lettering patterns, and vivid colors. Third, BTS pursues a dynamic and active sporty style by utilizing the sleeveless basketball shirts, round neckline baseball shirts and shorts, training pants, and overfit sweatshirts with an emphasis on lettering patterns.

• Korean Journal of Materials Research
• /
• v.23 no.5
• /
• pp.276-280
• /
• 2013

Coal tar is the primary feedstock of premium graphitizable carbon precursor. Coal tars are residues formed as byproducts of thermal treatments of coal. Coal tar pitches were prepared through two different heat treatment schedules and their properties were characterized. One was prepared with argon and oxidation treatment with oxygen; the other was prepared with oxygen treatment at low temperature and then argon treatment at high temperature; both used coal tar to prepare coal tar pitches. To modulate the properties, different heat treatment temperatures ($300{\sim}400^{\circ}C$) were used for the coal tar pitches. The prepared coal tar pitches were investigated to determine several properties, such as softening point, C/H ratio, coke yield, and aromaticity index. The coal tar pitches were subject to considerable changes in chemical composition that arose due to polymerization after heat treatment. Coal tar pitch showed considerable increases in softening point, C/H ratio, coke yields, and aromaticity index compared to those characteristics for coal tar. The contents of gamma resin, which consists of low molecular weight compounds in the pitches and is insoluble in toluene, showed that the degree of polymerization in the pitches was proportional to C/H ratio. Using an oxidizing atmosphere like air to prepare the pitches from coal tar was an effective way to increase the aromaticity index at relatively low temperature.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.105-116
• /
• 2015

In this study, airside performance of round fin-and-tube heat exchangers are compared with that of the herringbone wave fin-and-tube heat exchangers with an aim to investigate the effect of fin shape on thermal performance. Results show that j factors of the round wave fin are 1.2~22% larger than those of herringbone wave fin. The f factors of the round wave fin are -1.0~29% smaller than those of herringbone wave fin for 1 or 2 row configuration. For 3 row configuration, f factors of the round wave fin are 8.3~23% larger. The reason may be attributed to the reduced recirculation zone in the valley of the fin for round wave fin as compared with that of the herringbone wave fin. For round wave fin, the effect of fin pitch on j and f factor is not significant. In addition, j factors decrease as the number of tube row increases. On the other hand, f factors are independent of the number of tube row. A new correlation was developed based on the present data.