References
- Duan, Z., Zhan, C., Zhang, X., Mustafa, M. Zhao, X., Alimohammadisgvand, B. and Hasan, A., 2012, "Indirect Evaporative Cooling: Past, Present and Future Potentials," Renew. Sustain. Energy Rev., Vol. 16, pp. 6823-6850. https://doi.org/10.1016/j.rser.2012.07.007
- Jaber, S. and Ajib, S., 2011, "Evaporative Cooling as an Efficient System in Mediterranean Region," Appl. Therm. Eng., Vol. 31, pp. 2590-2596. https://doi.org/10.1016/j.applthermaleng.2011.04.026
- Caliskan, H., Dincer, I. and Hepbasil, A., 2012, "Exergoeconomic Enviroecomomic and Sustainability Analyses of a Novel Air Cooler," Energy Build., Vol. 55, pp. 747-756. https://doi.org/10.1016/j.enbuild.2012.03.024
- Costello, B. and Finn, D., 2007, "Thermal Effectiveness Characteristics of Low Approach Indirect Evaporative Cooling Systems in Buildings," Energy Build., Vol. 39, pp. 1235-1243. https://doi.org/10.1016/j.enbuild.2007.01.003
- Maheshwari, G. P., Al-Ragom, F. and Suri, R. K., 2001, "Energy Saving Potential of an Indirect Evaporative Cooler," Appl. Energy, Vol. 69, pp. 69-76. https://doi.org/10.1016/S0306-2619(00)00066-0
- Santamouris, M. and Kolokotsa, D., 2013, "Passive Cooling Dissipation Techniques for Buildings and Other Structures: the State of the Art," Energy Build., Vol. 57, pp. 74-94. https://doi.org/10.1016/j.enbuild.2012.11.002
- Watt, J. D. and Brown, W. K., 1997, Evaporative Air Conditioning Handbook, 3rd ed., The Fairmont Press Inc.
- Pescod, D., 1979, "A Heat Exchanger for Energy Saving in an Air Conditioning Plant," ASHRAE Trans., Vol. 85., Pt. 2, pp. 238-251.
- Maclaine-Cross, I. L. and Banks, P. J., 1981, "A General Theory of Wet Surface Heat Exchangers and Its Application to Regenerative Cooling," J. Heat Transfer, Vol. 103, pp. 578-585.
- Kettleborough, C. F. and Hsieh, C. S., 1983, "The Thermal Performance of the Wet Surface Plastic Plate Heat Exchanger Used in an Indirect Evaporative Cooler," J. Heat Transfer, Vol. 105, pp. 366-373. https://doi.org/10.1115/1.3245587
- Tejero-Gonzalez, A., Andres-Chicote, M., Velasco - Gomez, E. and Rey-Martinez, F. J., 2013, "Influence of Constructive Parameters on the Performance of Two Indirect Evaporative Cooler Prototypes," Appl. Therm. Eng., Vol, 51, pp. 1017-1025. https://doi.org/10.1016/j.applthermaleng.2012.10.054
- Parker, R. O. and Treybal, R. E., 1962, "The Heat Mass Transfer Characteristics of Evaporative Coolers," Chem. Eng. Prog. Symp. Ser. Vol 57, No. 32, pp. 138-149.
- Hasan, A. and Siren, K., 2003, "Performance Investigation of Plain and Finned Tube Evaporatively Cooled Heat Exchangers," Appl. Therm. Eng., Vol. 23, No. 3, pp. 325-340. https://doi.org/10.1016/S1359-4311(02)00194-1
- Zalewski, W. and Gryglaszewski, P. A., 1977, "Mathematical Model of Heat and Mass Transfer Processes in Evaporative Coolers," Chem. Eng. Process, Vol. 36, No. 4, pp. 271-280. https://doi.org/10.1016/S0255-2701(97)00006-8
- Ren, C. and Yang, H., 2006, "An Analytical Model for the Heat and Mass Transfer Processes in Indirect Evaporative Cooling with Parallel/Counter Flow Configurations," Int. J. Heat Mass Transfer, Vol. 49, pp. 617-627. https://doi.org/10.1016/j.ijheatmasstransfer.2005.08.019
-
Hasan, A., 2012, "Going Below the Wet-Bulb Temperature by Indirect Evaporative Cooling: Analysis Using a Modified
$\varepsilon$ -NTU Method," Appl. Energy, Vol. 89, pp. 237-245. https://doi.org/10.1016/j.apenergy.2011.07.005 - Cui, X., Chua, K. J., Islam, M. R. and Yang, W. M., 2014, "Fundamental Formulation of a Modified LMTD Method to Study Indirect Evaporative Heat Exchangers," Energy Conservation Management, Vol. 88, pp. 372-381. https://doi.org/10.1016/j.enconman.2014.08.056
- Chen, Y., Yang, H. and Luo, Y., 2016, "Indirect Evaporative Cooler Considering Condensation from Primary Air; Model Development and Parameter Analysis," Build. Env., Vol. 95, pp. 330-345. https://doi.org/10.1016/j.buildenv.2015.09.030
- Riangvilaikul, B. and Kumar, S., 2010, "An Experimental Study of a Novel Dew Point Evaporative Cooling System," Energy Build., Vol. 42, pp. 637-644. https://doi.org/10.1016/j.enbuild.2009.10.034
- Zhao, X., Liu, S. and Riffat, S. B., 2008, "Comparative Study of Heat and Mass Exchanging Materials for Indirect Evaporative Cooling Systems," Build. Environ., Vol. 43, No. 11, pp. 1902-1911. https://doi.org/10.1016/j.buildenv.2007.11.009
- KS M 896, 2013, Paper and Plate - Measurement of Water Absorption Rate in Water.
- ASHRAE Standard 41.1, 1986, Standard Method for Temperature Measurement, ASHRAE.
- ASHRAE Standard 41.2, Standard Method for Laboratory Air-Flow Measurement, ASHRAE.
- KS C 9306, 2010, Air Conditioner, Korean Standard Association.
- Kim, N.-H., 2016, "Heat and Moisture Transfer in a Counter Flow Regenerative Evaporative Cooler Made of Plastic Film/Paper Composite," J. Mech Sci. Tech., Vo. 30, pp. 1449-1457. https://doi.org/10.1007/s12206-016-0253-z
- ASHRAE Standard 143, 2007, Method of Test for Rating Indirect Evaporative Coolers, ASHRAE.
- Klein, S. J. and McClintock, F. A., 1953, "The Description of Uncertainties in a Single Sample Experiments," Mech. Eng. Vol. 75, pp. 3-9.
- Mills, A. F., 1995, Basic Heat and Mass Transfer, Irwin Pub.
- Shah, R. K. and London, A. L., 1978, Laminar Flow Forced Convection in a Duct, Academic Pub.
- Johnson, J. E., 1997, Heat and Mass Transfer Between Two Fluid Streams Separated by a Thin, Permeable Barrier, Ph.D. Thesis, University of Minnesota, Department of Mechanical Eng.
- Kays, W. M. and London, A. L., 1984, Compact Heat Exchangers, McGraw-Hill Pub..
- Personal communication with Samhwa Ace Co., 2016.