The purposes of this study are to improve the ultrasound resolution of various nylon and metallic mono-filament wires, therefore, it was tested that it analyze on nylon mono-filament wire of 0.1 mm in A Co.'s ultrasonic phantom and synthesis of C15 g tissue mimicking materials(TMM), analyze resolution of nylon and metallic mono-filament wires in water and TMM. The results obtained were summarized as follows: 1. Metallic mono-filament wire of 0.1 mm and nylon mono-filament wire of 0.12 mm, 180 denier showed that it cleared dot echo pattern. 2. Metallic and nylon mono-filament wire of 0.2 mm showed that it cleared comet tail echo by reverberation artifact. 3. Nylon and metallic mono-filament wire of 0.1 mm showed that it can used for dead zone and axial resolution test. 4. Nylon mono-filament wire compared with metallic mono-filament wire showed that it satisfy elasticity and construction. 5. Degree of hardness of na not changed mono-filament's echo textures.
The CT can accurately present the anatomical structure of an organ in the human body, and the resolution of the image is excellent. On Brain CT examination, the radiation sensitivity of the orbit is high and it is subject to many exposure effects. To reduce exposure dose of lens, this study compares change of exposure dose and shielding rate about non-shielding and shielding in a way of using two shielding materials, bismuth and tungsten. In this study, we used bismuth and tungsten filament as shielding materials made by 3D printing to measure the exposure dose according to the materials thickness and each of slices. To compare each shielding rate, 1 mm to 5 mm of two materials was measured with the head phantom fixed and the Magicmax universal dosimeter placed on the eye when the shielding material is not placed, and the shielding material is placed on it. In the 1 mm thick filament, the bismuth filament showed 26.8% and the tungsten filament showed 43.1% shielding rate. Therefore, tungsten presents much greater shielding effect than bismuth.
Proceedings of the Korean Society of Dyers and Finishers Conference
/
2011.03a
/
pp.52-52
/
2011
나노필라멘트는 단면직경이 수백 나노미터에서 수십 나노미터 수준인 초극세 장섬유를 말하며, 해도형 복합방사로 얻어진 섬유를 알칼리 감량을 통해 해성분을 용출하여 도성분에 해당하는 나노필라멘트를 얻는다. 이러한 나노필라멘트사는 초극세와 마찬가지로 단위중량당 표면적이 크고, 작은 굴곡반경 및 낮은 굴곡 반발성으로 인하여 일반 합성섬유에 비하여 고가성 및 새로운 기능성을 부여하는 제품에 응용 될 수 있다. 특히 나노필라멘트를 이용한 편물제품으로 경편물은 wiping cloth 등 산업용도에 적용되며, 환편물은 인조피혁 등 의류용으로 사용된다. 나노필라멘트 편물은 원사섬도, 편물의 조직, 밀도 및 중량 등에 따라 분할율과 용출 특성이 상이하므로 후가공 공정에 있어서 감량공정은 매우 중요하다. 또한 나노필라멘트와 같은 세사의 경우 일반사보다 비표면적이 증가하여 동일한 염색조건에서 옅은 색상을 나타낸다. 이로 인해 같은 색상을 위하여 보다 많은 염료를 투입해야 하며, 결과적으로 견뢰도 문제가 발생할 우려가 있다. 이 연구에서는 해도형 나노필라멘트 PET 원사와 일반 PET사를 복합한 2종의 편물을 이용하여 알칼리감량특성 및 3가지 분산염료에 대한 염색성과 견뢰도를 조사하였다. 알칼리 처리조건에 따른 감량률을 측정함으로써 각 편물의 이론 감량률에 도달하는 지점을 확인하고, SEM사진 분석을 통하여 해도사의 감량정도 및 분할특성을 확인하였다. 나노필라멘트 편성물은 염료농도가 증가함에 따라 지속적으로 K/S 값이 증가하였으나, 전체적으로 낮은 K/S값을 얻었다. 또한 염색온도가 110에서 $100^{\circ}C$로 증가함에 따라 K/S값이 감소하였는데, 이는 고온에서 분산염료가 나노필라멘트로부터 일반 PET사로 이염이 더 많이 발생하였기 때문이라고 생각된다. 세탁견뢰도의 경우 양호 또는 우수하였으나, 일광견뢰도의 경우 1등급으로 매우 낮아 이를 개선하기 위한 노력이 향후 진행되어야 할 것이다.
Proceedings of the Korean Society of Dyers and Finishers Conference
/
2012.03a
/
pp.27-27
/
2012
나노필라멘트는 단면직경이 수백 나노미터에서 수십 나노미터 수준인 초극세 장섬유를 말하며, 해도형 복합방사로 얻어진 섬유를 알칼리 감량을 통해 해성분을 용출하여 도성분에 해당하는 나노필라멘트를 얻는다. 이러한 나노필라멘트사는 극세사와 마찬가지로 단위중량당 표면적이 크고, 작은 굴곡반경 및 낮은 굴곡 반발성으로 인하여 일반 합성섬유에 비하여 고가성 및 새로운 기능성을 부여하는 제품에 응용될 수 있다. 나노필라멘트 편물은 원사섬도, 편물의 조직, 밀도 및 중량 등에 따라 분할율과 용출 특성이 상이하므로 후가공 공정에 있어서 감량공정은 매우 중요하다. 또한 나노필라멘트와 같은 세사의 경우 일반사보다 비표면적이 증가하여 동일한 염색조건에서 옅은 색상을 나타낸다. 이로 인해 같은 색상을 위하여 보다 많은 염료를 투입해야 하며, 결과적으로 견뢰도 문제가 발생할 우려가 있다. 이 연구에서는 800nm급 해도형 나노필라멘트 PET 100% 또는 나노필라멘트와 일반 PET사를 복합한 편물을 이용하여 알칼리 감량거동 및 분산염료에 대한 염색성과 견뢰도를 연구하였다. 알칼리 감량이 진행됨에 따라 감량률이 증가하였으며, SEM분석, DSC분석, 양이온염료 염색법 등을 통하여 해성분 용출 및 도성분 분할이 진행되는 정도를 평가할 수 있었다. 나노필라멘트 편성물은 염료농도가 증가함에 따라 지속적으로 K/S값이 증가하였으나, 일반 극세사 편성물에 비해 낮은 K/S값을 얻었다. 또한 나노필라멘트/일반 PET 복합편물에 있어서 염색온도가 110에서 $130^{\circ}C$로 증가함에 따라 K/S값이 감소하였는데, 이는 고온에서 분산염료가 나노필라멘트로부터 일반 PET사로 이염이 더 많이 발생하였기 때문이라고 생각된다. 세탁견뢰도의 경우 양호하였으나, 일광견뢰도의 경우 1등급으로 매우 낮았다.
Proceedings of the Korean Vacuum Society Conference
/
2015.08a
/
pp.93.2-93.2
/
2015
플라즈마를 포함한 반응성 가스 공정 분석용 사중극자 질량분석기의 필라멘트의 파손양상을 조사하였다. 또한 유전체 증착층이 이온원 성능에 미치는 영향을 분석하기 위하여 이온원의 일반적인 가동 전압 조건에서 Poisson방정식을 이용하여 전위를 수치 해석으로 구하였다. 사용중 파손된 필라멘트의 파단면을 주사전자현미경으로 관찰결과, 수직으로 절단되는 양상과 직경이 점차 작아지면서 erosion되는 두가지 양상을 보였다. 또한 파단면은 표면균열과 패시팅(faceting) 현상을 보였다. 필라멘트 사용시 가장 큰 문제는 패시팅(faceting)이다. 대부분의 결정에서는 다른 결정면보다 에너지 준위가 낮은 결정면이 존재한다. W 원자는 고온에서 확산 또는 증발하여 표면에서 다시 응축할 때 표면 에너지를 최소화하기 위한 독특한 평형 형상이 만들어 지는데 이것이 패시팅의 구동력이다. 이때 국부적으로 단면적이 감소하는 곳이 생기는데, 이 지점이 집중적으로 가열되고 증발이 가속화하여 파손된다. 파단면을 EDS 분석결과, 산화물을 포함한 F, Fe 및 C이 검출되었다. 이 F과 C는 공정중 사용된 CF4의 분해에 의한 것으로 생각되며, 파손된 필라멘트를 Ar 유도결합 플라즈마로 처리한 결과 이 F, Fe 및 C의 양이 감소하였다.
열 필라멘트 화학증착(CVD) 다이아몬드 제조에서 bias인가에 따른 다이아몬드 생성양상의 변화를 조사하였다. 기존의 bias실험에서는 기판과 필라멘트 사이에 bias를 인가시켰으나, 본 연구에서는 이 방법 외에 필라멘트 상 하에 텅스텐 망을 설치하여 bias를 인가시켰다. 실험결과 bias 전압을 인가하는 방법에 관계없이 필라멘트의 전자방출을 촉진시키는 방향으로 bias가 인가될 겨우 다이아몬드의 생성밀도 및 증착속도에 유리하게 작용하였다. 본 결과로부터 다이아몬드 증착시 필라멘트에서 방출되는 전자가 중요한 영향을 미치고 있음을 확인하였다. 전자의 기판표면과의 충돌에 의하여 다이아몬드의 생성에 미치는 효과는 적어도 본 실험에서는 중요하지 않음을 알 수 있었다.
Park, Sang-Ho;Yang, Kwy-Sang;Byun, Sang-Beom;Kim, Woo-Seok;Lee, Ji-Kwang;Park, Chan;Choi, Kyeong-Dal
Proceedings of the KIEE Conference
/
2008.07a
/
pp.810-811
/
2008
현재 고온 초전도전력기기를 실용화하는데 교류손실이 문제가 되고 있다. 이러한 교류손실을 저감하기위해서 선재를 분할하는 방법에 대한 연구가 진행중이다. 분할된 초전도선재의 각 필라멘트의 전류분류가 일정하지 않을 경우 필라멘트의 임계전류 이상이 인가될 수 있다. 따라서 각 필라멘트에 흐르는 전류를 측정하여야 한다. 그러나 초전도선재의 필라멘트 각각의 전류를 측정하기는 어렵다. 본 연구에서는 초전도선재의 필라멘트의 각각의 전류를 비접촉 방식으로 측정할 수 있는 서치코일을 이용한 방법을 제안하였고 실험을 통해 이를 확인하였다.
Journal of the Korean Society of Propulsion Engineers
/
v.3
no.2
/
pp.56-65
/
1999
The relationship of the winding process variables and the mechanical properties of filament wound composites is investigated experimentally. The winding process variables considered are the fiber tensions and the fiber ends. The filament wound ring specimens are fabricated using 3-axis controlled filament winding machine. Two types of carbon fibers, TZ-507 and IZ-40, are used as reinforcements and epoxy for filament winding is used as resin. During the winding process, the fiber tensions are varied from 0.5kgf to 3.0kgf, and the number of the fiber ends are varied from 1 to 6. The fiber volume fractions and the void contents for the ring specimens are measured through the resin digestion. The mechanical properties of the ring specimens are also evaluated by the split disk test. The test results show that the winding process variables affect the fiber volume fractions and the void contents of the ring specimens, which result in the variation of the tensile properties of the ring specimens. Therefore, suitable winding process variables should be applied to maximize the structural performance and the productivity for filament wound structures.
Journal of the Computational Structural Engineering Institute of Korea
/
v.18
no.2
/
pp.191-200
/
2005
To develop composite bridge deck, comparative study on the flexural characteristics of deck fabricated with filament winding and pultrusion was performed. In this study, composite deck of triangular shape was fabricated with filament winding process and flexural tests were conducted along with pultruded 'Duraspan' deck. Failure load, maximum deflection and strains were compared with each other. Also finite element analysis for filament winding deck was carried out and the results were compared with those from experiments.
This paper explores developing sustainable 3D printing filaments using organic soybean hulls mixed with polylactic acid (PLA). The study experiments with various particle sizes and mixing ratios, examining the physical and mechanical properties of the resulting filaments. Results show that smaller soybean hull particles and specific mixing ratios enhance the filament's quality while maintaining PLA's characteristics. This research signifies a step towards environmentally friendly 3D printing materials, offering a viable alternative to conventional filaments and addressing ecological concerns in the industry.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.