• Proceedings of the KIEE Conference
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2522-2525
• /
• 2001

Si PIN diodes are subject to be damaged from the exposure of fast neutron by displacement of Si lattice structure. The defects are effective recombination centers for carriers which migrate through the base region of the PIN diode when forward voltage is applied. It causes an increase in current and a decrease in resistivity of the diode. This paper presents the development of a neutron sensor based on displacement damage effect. PIN diodes having various structures were made bymicro-fabrication process, and neutron beam test was performed to identify neutron damage effect to the diode. From a result of the test, it was shown that the forward voltage drop of the diode, at a constant current, has good linearity for neutron dosage. Also it was found that the newton dosage can be measured by the pin diode neutron dosimeter with constant current power.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제13권5호
• /
• pp.931-936
• /
• 2018

We designed an x-band radar for motion detector using a frequency tunable hairpin ring resonator. The proposed doppler radar sensor can vary the oscillation frequency by applying a hairpin resonator using a varactor diode to the oscillator, and this can also reduce the size by transmitting and receiving a signal from Tx/Rx dual antenna. The fabricated doppler radar sensor was fabricated in $30{\times}24mm$, and it was confirmed that the pulse width difference occurred according to the distance from the object. The measurement results showed oscillation at 10.525GHz. We confirmed that it is enough to use as radar for motion detection from the measured results.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.343-344
• /
• 2010

화석연료의 고갈로 인하여 친환경 자동차에 대한 연구와 상용화가 급속도로 진행되면서 점점 대형 차종으로 그 범위가 넓어지고 있다. 대형 차종에 적용되는 전기동력 시스템의 MCU(Motor Control Unit), GCU(Generator Control Unit), DC/DC 컨버터 등과 같은 전장품도 그 용량이 커지면서 상용화를 위해 효율적인 측면도 많이 부각되지만 스위칭 소자, 변압기, 초크, 다이오드 등에서 동작으로 인해 열이 발생하고 제품의 구조상 밀폐된 공간에 장착이 되기 때문에 발열로 인한 동작의 신뢰성과 제품의 내구성에 큰 영향을 미치게 된다. 그중 가장 발열이 심한 IGBT(Insulated Gate Bipolar Transistor) 등과 같은 스위칭 소자에서 발생하는 열을 효과적으로 냉각시키기 위해 수냉구조가 필수적이며 동일한 조건의 수압, 유량에 보다 높은 방열특성을 가지기 위해 냉각구조에 대한 해석이 제품을 개발 전에 선행되어야 한다. 본 논문에서는 유로의 냉각핀 형상과 유로 구조에 따라 방열특성이 어떠한 차이가 있는지 시뮬레이션 프로그램을 통하여 비교하고, 모사발열체를 이용한 방열부의 냉각 성능 시험과 다이나모 환경의 최대 출력 시험을 통하여 방열 특성을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.352.1-352.1
• /
• 2016

양자점은 나노미터 크기의 반도체 결정으로 밴드갭에 따라 광학적, 전기적 성질이 달라지는 독특한 성질을 가지는 형광물질으로 활발히 연구되고 있다. 중금속을 기반으로 한 양자점은 높은 발광효율과 광안전성을 가지며, 가시광선 영역에서 빛을 내는 특징을 가지고 있다. 그러나 중금속을 사용하기 때문에 독성이 있어 인체나 환경에 유해하여 응용 연구에 제한적이다. 반면에, 탄소 기반의 양자점은 중금속 기반의 양자점과 비슷한 성질을 가질 뿐만 아니라, 높은 용해도와 낮은 독성으로 인해 생체적합성이 높다는 장점이 있다. 이를 이용하여 발광다이오드(LEDs), 태양전지, 광촉매 뿐만 아니라 바이오이미징, 바이오센서 등 생물학분야에도 응용 될 수 있다. 본 연구에서는 Bottom-up 합성 방법으로 유기전구체를 이용하여 질소를 함유하고 있는 양친매성 탄소 양자점(N-GQDs)을 합성하였다. 합성에 사용한 유기전구체는 기존에 보고된 유기전구체와 다르게 반응 진행 중에도 pH 측정 결과 중성을 나타내며, 반응 온도($225^{\circ}C$)와 유사한 온도에서도 pH 값은 여전히 6.0 이상의 값을 나타냈다. 중성을 띄는 특징으로 인해 추가적인 산제거 과정이나 표면안정화 과정이 필요 없다는 장점을 가지고 있다. 합성된 N-GQDs는 높은 결정성의 원형구조를 가지며, 원자힘현미경(AFM) 분석을 통해 높이가 ~ 1.5 nm 미만으로 3층 이하의 두께로 형성되었음을 확인하였다. 또한, 적외선 분광법(FT-IR) 분석을 통해 O-H기, 방향족 고리의 C = C (또는 C = N)기 및 C-N기가 각각 ~3250, ~1670과 ~1140 cm-1에서 확인할 수 있다. 합성된 양자점을 유기태양전지의 active layer에 소량(2 wt%) 첨가하여 양자점의 광학적, 전기적 성질을 확인하였다. 비교군 유기태양전지보다 N-GQDs가 첨가된 유기태양전지의 외부양자효율(PCE)이 7.3%에서 8.4%로 약 20%가 증가하는 것을 보였다. 이는 양자점이 상대적으로 흡수가 약한 단파장 영역의 빛을 흡수하고 PL을 내어 active layer로 에너지 트랜스퍼 현상이 일어나 전자전달을 원활하게 해 주기 때문이다. 앞으로 본 연구의 가능성과 추가적인 연구를 통해 더 많은 분야에 응용되기를 기대한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제53권11호
• /
• pp.99-106
• /
• 2016

When radon is staying at alveoli and bronchial tubes, the collapse of radon creates progeny nuclides (alpha ray, beta ray, gamma ray, etc.). They emit radiation causing a mutation in the chromosome of the cell, resulting in lung cancer. In other words, the main cause of lung cancer is radiation emitting as the result of radon collapse rather than radon gas. The 82% of radiation exposed to people is the natural radiation. Most of the natural radiation is radon. If we properly control the concentration of radon indoors, the probability of occurrence of lung cancer could be decreases to be 70%. Until now, to measure the indoor radon concentration, imported radon sensors are needed. So, DB construction of indoor radon emission and popular radon measuring apparatus should be developed. In this paper, we propose the radon detecting method using PIN photodiode. Also, we confirmed the PIN photodiode could be used as radon sensor module through some experimental studies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제41권7호
• /
• pp.775-782
• /
• 2016

In this paper, we presented the paper-based reconfigurable frequency selective surface(FSS) for transmitting or blocking the wireless LAN signal in indoor environments. The proposed reconfigurable FSS are designed on coated paper using a printing of conductive ink and conductive adhesive for PIN diode, which provides ON/OFF of the reconfigurable FSS for passing or blocking the 5GHz signal. The reconfigurable FSS attached on the wall can pass or block the incident wireless signal as the received signal strength in indoor. To provide the validity of the proposed FSS, we fabricated the reconfigurable FSS on the paper and confirmed the very similar results between simulations and measurements. From the measured results of the proposed spectrum control system, we know that the proposed reconfigurable FSS can block about 20dB at 5.745GHz~5.805GHz.

• Korean Journal of Optics and Photonics
• /
• 제17권1호
• /
• pp.60-67
• /
• 2006

We constructed a TEA $N_2$ laser which consists of spark gap, pulse type high voltage power supply, Blumlein transmission line circuit, laser tube with Ernst electrode. We observed the self-preionization with an optical fiber in the spark gap and laser tube. The higher voltage power supplied to the Blumlein transmission line circuit, the better preionization was. An U-type transformer yielded better stability and output power than an I-type transformer. The discharge time after triggering a spark gap for the U-type transformer was also short. We obtained the stability of $2.7\%$ and output power of $36{\mu}J$ when the optimum conditions of the laser operation were spark gap distance of 6.0 mm, electrode distance in laser tube of 5.0 mm, $N_2$ gas flow rate in spark gap of 1500 cc/min, $N_2$ gas flow rate in laser tube of 4 ${\iota}$/min, output window reflectivity of $40\%$ and repetition rate of 10 Hz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제27권9호
• /
• pp.791-799
• /
• 2016

This paper presents the design of reconfigurable frequency selective surfaces for X-band bandpass operation with improved isolation. The proposed reconfigurable FSS is composed of a four-legged loaded element, a inductive stub and a bias grid. The PIN diode is located between the four-legged loaded element and the stub, which can control the frequency response of reconfigurable FSS by ON/OFF state. By adjusting the length of the stub, the desired bandpass frequency and the improved isolation between ON and OFF state can be obtained. For validation of simulated results, we have carried out transmission characteristic measurements using rectangular waveguide of WR-90. The measured results are in good agreements with the simulated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제16권4호
• /
• pp.397-401
• /
• 2005

In this paper, a slot-coupled microstrip antenna with switchable polarization is proposed for the polarization diversity applications in the complicated communication environment. The proposed antenna is fed by a microstrip line through one of two slots located with the interval of $\lambda{g}/4$ in the ground plane. By switching the PIN diode between opened and shorted termination which is located at the tip of the microstrip line, the switching function between horizontal and vertical polarization was confirmed experimentally. The measured resonant frequencies of the fabricated antenna are $2.41\;\cal{GHz}\;2.40\;\cal{GHz}$ and the cross polarization levels are $19\;\cal{dB},\;23\;\cal{dB},\;the\;-10\;\cal{dB}$ return loss bandwidths are $95\;\cal{MHz}\;100\;\cal{MHz}$ in horizontal and vertical polarization, respectively, and the antenna gain is almost $6\;\cal{dBi}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제23권12호
• /
• pp.1337-1342
• /
• 2012

In this paper, we propose a novel reconfigurable antenna that can change the electrical shape of the matching network using RF switches of PIN diodes. The designed antenna operates at two different modes that are Mode 1 (HSDPA band, 2.1~2.2 GHz) and Mode 2(WiBro WiFi band, 2.3~2.5 GHz). The antenna is built on both sides of a polyarcylate substrate. The measured reflection coefficient shows a matching bandwidth of 547 MHz($S_{11}$ <-3 dB, 2.035~2.582 GHz) for Mode 1 and 600 MHz($S_{11}$ <-3 dB, 2.2~2.8 GHz) for Mode 2, and it shows average vertical gains of -4.4 dBi and -4.5 dBi in x-y plane, respectively.