• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.69-78
• /
• 2017

This study was conducted to investigate the effects of waterlogging on the net photosynthetic rate, root activity and fruit yield of hot pepper. Plants were grown in two greenhouses: extractor fans and side ventilators began to operate when the inside temperature reached $25^{\circ}C$ in one greenhouse and $35^{\circ}C$ in the other. Waterlogging treatments were performed 54 days after transplanting (when fruit setting at the second flower truss was complete). The plot in each greenhouse was divided into five sections, and each section was watered for 0, 12, 24, 48 or 72 h using drip irrigation. Plants under $25^{\circ}C$ and non - waterlogging treatment exhibited in the greatest growth among treatments. Plant growth generally decreased as the waterlogging period increased. The net photosynthetic rate was highest under non - waterlogging and $25^{\circ}C$ treatment and lowest under 72 h waterlogging and $25^{\circ}C$ treatment. The root activity decreased as the waterlogging period increased, except for plants under 72 h waterlogging treatment at $35^{\circ}C$. The number and weight of red pepper fruits per plant were highest under non - waterlogging treatment at $35^{\circ}C$. The greatest fruit yield was also observed under non - waterlogging treatment at $35^{\circ}C$, with production reaching 3,697 kg / 10a. At the appropriate temperature for hot pepper ($25^{\circ}C$), yields were reduced by 25 - 30% under 12, 24 and 48 h waterlogging treatment compared to non - waterlogging treatment. These results indicate that longer waterlogging periods reduce the growth, net photosynthetic rate, root activity and yields of hot pepper. However, the net photosynthetic rate and stomatal conductance of hot pepper plants grown under 72 h waterlogging treatment recovered nine days after growth under normal growth conditions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.43-52
• /
• 2016

Due to the characteristics of microwave signals, Radar satellite image has been used for flood detection without weather and time influence. The more methods of flood detection were developed, the more detection rate of flood area has been increased. Since flood causes a lot of damages, flooded area should be distinguished from non flooded area. Also, the detection of flood area should be accurate. Therefore, not only image resolution but also the filtering process is critical to minimize resolution degradation. Although a resolution of radar images become better as technology develops, there were a limited focused on a highly suitable filtering methods for flood detection. Thus, the purpose of this study is to find out the most appropriate filtering method for flood detection by comparing three filtering methods: Lee filter, Frost filter and NL-means filter. Therefore, to compare the filters to detect floods, each filters are applied to the radar image. Comparison was drawn among filtered images. Then, the flood map, results of filtered images are compared in that order. As a result, Frost and NL-means filter are more effective in removing the speckle noise compared to Lee filter. In case of Frost filter, resolution degradation occurred severly during removal of the noise. In case of NL-means filter, shadow effect which could be one of the main reasons that causes false detection were not eliminated comparing to other filters. Nevertheless, result of NL-means filter shows the best detection rate because the number of shadow pixels is relatively low in entire image. Kappa coefficient is scored 0.81 for NL-means filtered image and 0.55, 0.64 and 0.74 follows for non filtered image, Lee filtered image and Frost filtered image respectively. Also, in the process of NL-means filter, speckle noise could be removed without resolution degradation. Accordingly, flooded area could be distinguished effectively from other area in NL-means filtered image.

• Korean journal of applied entomology
• /
• v.20 no.3 s.48
• /
• pp.135-145
• /
• 1981

Vegetables including Chinese cabbage and radish have been grown in alpine areas such as Muju, Namweon, Jinan and Jangsu during the shortage period of vegetables. The incidence of various diseases, environmental factors such as temperatures and rainfalls, and aphid populations as virus vector were observed at 10-day intervals from July to September in those areas. Disease incidence showed no significant difference among locations. Major diseases in Chin ese cabbage were bacterial soft rot, white spot, downy mildew, mosaic virus, Alternaria leaf spot and Fusarium seedling blight. Major diseases in radish were virus, white rust, black rot, root rot, leaf spot and Fusarium seedling blight. Disease incidence reached peak on Aug. 20 with $27\%$ infection in radish and with $20\%$ infection in Chinese cabbage during the growing season, and declined thereafter. Percentage of infection in each growth stage showed $25\%$ at root thickening stage and $26\%$ at the harvest time in radish; and the head formation stage, $24\%$ at the harvest time. The data indicate that disease incidence in radish increased rapidly at late growing stage and progressively increased in Chinese cabbage Seedling blight caused by Fusarium sp. and root rot caused by Aphanomyces sp. were also observed in those areas. Cool and wet weather appeared to be favorable for disease incidences during the rainy period of growing season although average temperature was about $25^{\circ}C$. Populations of aphids were lower in the alpine vegetable growing area than that of flat areas. Aphids as virus vectors from total aphids collected were $73.5\%$ or 289 virus vectors /993 total aphids in Namweon and $18.1\%$ or 31 virus vectors/171 total aphids in Muju. The most prerevalent species of aphids was Myzus persicae Sulz.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.293-303
• /
• 2012

Recently, as construction technology improved, concrete structures not only became larger, taller and longer but were able to perform various functions. However, if extreme loads such as impact, blast, and fire are applied to those structures, it would cause severe property damages and human casualties. Especially, the structural responses from extreme loading are totally different than that from quasi-static loading, because large pressure is applied to structures from mass acceleration effect of impact and blast loads. Therefore, the strain rate effect and damage levels should be considered when concrete structure is designed. In this study, the low velocity impact loading test of steel fiber reinforced concrete (SFRC) slabs including 0%~1.5% (by volume) of steel fibers, and strengthened with two types of FRP sheets was performed to develop an impact resistant structural member. From the test results, the maximum impact load, dissipated energy and the number of drop to failure increased, whereas the maximum displacement and support rotation were reduced by strengthening SFRC slab with FRP sheets in tensile zone. The test results showed that the impact resistance of concrete slab can be substantially improved by externally strengthening using FRP sheets. This result can be used in designing of primary facilities exposed to such extreme loads. The dynamic responses of SFRC slab strengthened with FRP sheets under low velocity impact load were also analyzed using LS-DYNA, a finite element analysis program with an explicit time integration scheme. The comparison of test and analytical results showed that they were within 5% of error with respect to maximum displacements.

• Korean Journal of Environment and Ecology
• /
• v.31 no.1
• /
• pp.42-53
• /
• 2017

One of the negative ecological effects following road construction is roadkill; animals die on the roads after being struck by vehicles. Roadkills have been a major concern in South Korea due to the large mountain areas in the country and have been mentioned as a causal factor for the decline in wildlife. Although snake roadkills frequently occur, as with mammals, birds, and amphibians, there are not many related studies done on snake roadkills. In this study, we determined snake roadkill patterns in the northeast part of South Korea including most of the Gangwon-do areas and parts of Gyeonggi-do, Chungcheongbuk-do, and Gyeongsangbuk-do by analyzing the snake roadkills found between May 2007 and Aug 2012. We identified a total of 155 roadkilled snakes from 10 different species. Red-sided water snake (Rhabdophis tigrinus), Red-tongue viper snake (Gloydius ussuriensis), Cat snake (Elaphe dione), Red-banded snake (Dinodon rufozonatus), and Viper snake (Gloydius brevicaudus) accounted for more than 90% of the total cases. It was found that more active forager snakes were killed than sit-and-wait foragers, more male snakes were killed than female snakes, and more adult snakes were killed than subadult snakes. The snake roadkill frequency was the highest in September between the altitudes of 200 and 400 m, and on roads between either a mountain and a body of water or between a mountain and a crop field. Our results are expected to enhance the understanding of snake roadkills in general and to determine the areas, specific sites and species for planning projects for snake roadkill reduction in the northeast of South Korea.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.120-129
• /
• 2020

In Yesan-gun, Korea's main apple-producing region, the area of apple cultivation and yield are declining. In particular, the worsening quality of fruits due to unusually high temperatures amid recent climate change has also become a major challenge for apple orchards located on flatlands. The objective of this research is to investigate quality changes of apples according to different growing environments, depending on the shade of the sun, by covering the trees with different colors of wind nets. A white and blue wind nets with a hole size of 2 × 2 mm is installed on two experimental trees, 17-year-old 'Fuji' and 'Hongro', which are planted 1.5 m × 3.5 m in the north-south direction. Treatment of wind nets effectively lowered fruit surface temperature regardless of apple variety. When measuring the temperature of the fruit surface at 2 pm, the temperature of the air was 34.8℃, but the 'Fuji' of the untreated blocks was the highest at 40.0℃, while the blue wind net and the white wind net were significantly lower at 34.9℃ and 36.6℃, respectively. In 'Hongro', the results showed that the surface temperature was effectively lowered by recording 38.3℃ for the blue wind net and 38.5℃ for the white wind net treatment when the untreated one was 44.2℃. According to the color difference in 'Fuji', the skin redness (a^⁎) was the lowest with untreated control at 16.5, but the blue and white wind net treatment higher at 18.0 and 19.3, respectively. In 'Hongro', the white wind net treated fruit also showed a much higher skin redness than the untreated control of 28.1, showing much higher a^⁎ of 34.9. Sunburn damage in 'Fuji' apples amounted to 9.4% in untreated control. However, the blue and white wind net treatment revealed to 3.8% and 4.2%, respectively. In 'Hongro', those damage in the fruits treated with blue or white wind net, accounted for only 8.8% and 12.4%, respectively, significantly lower than 28.8% occurrence of untreated one. And, these results were understood to be the result of low UV radiation being blocked by the treatment of wind nets.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.60-67
• /
• 2010

Although several studies have reported that Cr, Cu and As can leach from CCA-treated woods, few studies have been conducted on this topic in Korea. Therefore, this study was conducted to monitor Cr, Cu and As leaching from CCA-treated wood products and to develop a rapid identification method for CCA-treated wood products by using indicators such as PAN stain. Soil samples were collected at depths of 0-70 cm and wood samples were collected by thickness of wood layer. The soil and wood samples were then digested and analyzed for Cr, Cu and As concentrations using an atomic absorption spectrometer. The As and Cu concentrations decreased sharply with depth from 34.38 and 33.65 mg $kg^{-1}$ at 0-1 cm to 1.72 and 7.84 mg $kg^{-1}$ at 70 cm, respectively. In general, As was more mobile than Cr and Cu in the soil. For wood samples, the Cr, Cu and As concentrations were higher in the outer layer (0-0.5cm) than the inner layers (0.6-4.5cm). Evaluation of rapid identification methods revealed that 100% acetone with 0.1% PAN indicator was the best combination for detection of CCA-treated wood in the field.

• Clean Technology
• /
• v.18 no.4
• /
• pp.379-389
• /
• 2012

Environmental issues are being paid more attention due to income growth, urban overcrowding, and population growth in Korea. Among the various environmental problems, odor damage is the one of the serious factors. To take example for food waste combination treatment in Su-young wastewater treatment plant in Busan, many complaints occurred because this plant locate around residential areas. The purpose of this work is not only to analyze odorous elements and their contributions but also to evaluate odor quotient (OQ), sum of odor quotient (SOQ), and treatment efficiency of bio-filter. The results of dilution sensory test of complex odor, grinder, leachate, hopper indicated higher order complex odors happen in July and August. The main odorous elements consisted of hydrogen sulfide, ammonia, methly mercaptan and acetaldehyde, which were analyzed by instrumental detection method, and methyl mercaptan was exceeded over 3,571 times of threshold. In addition, result of contribution of odor was methyl mercaptan (49.95 to 59.08%), hydrogen sulfide (20.43 to 29.27%), trimethylamine (8.82 to 13.42%) and acetaldehyde (9.17 to 11.35%). Other facilities were compared with the contribution of the odor using OQ and SOQ during the process. Sulfur compounds, acetaldehyde, and trimethylamine are high contribution of odor using OQ as well as odor intensity of grinding process is highest. As a result, sulfur compounds (e.g., methyl mercaptan and hydrogen sulfide) are highest for OQ and SOQ of grinding process is highest as 7,067. The removal efficiency of deodorization equipment was more than 90.00% in ammonia and amines, but the average efficiency of sulfur compounds was 53.51%. Thus, this facility is more higher contribution of acetaldehyde and trimethylamine than other treatment facilities. And food waste treatment in environmental area needs to consider appropriate capacity and refers to other bio-filter operating conditions.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.199-207
• /
• 2016

This study was conducted to develop a forest fire occurrence model using meteorological characteristics for practical forecasting of forest fire danger rate by reflecting the climate change for the time period of 2000yrs. Forest fire in South Korea is highly influenced by humidity, wind speed, temperature, and precipitation. To effectively forecast forest fire occurrence, we developed a forest fire danger rating model using weather factors associated with forest fire in 2000yrs. Forest fire occurrence patterns were investigated statistically to develop a forest fire danger rating index using times series weather data sets collected from 76 meteorological observation centers. The data sets were used for 11 years from 2000 to 2010. Development of the national forest fire occurrence probability model used a logistic regression analysis with forest fire occurrence data and meteorological variables. Nine probability models for individual nine provinces including Jeju Island have been developed. The results of the statistical analysis show that the logistic models (p<0.05) strongly depends on the effective and relative humidity, temperature, wind speed, and rainfall. The results of verification showed that the probability of randomly selected fires ranges from 0.687 to 0.981, which represent a relatively high accuracy of the developed model. These findings may be beneficial to the policy makers in South Korea for the prevention of forest fires.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.33-66
• /
• 2014

While the numbers of overseas travelers has been increased rapidly each year, the numbers of passengers in the aircraft also has continued to be increased gradually. In the mist of these increasing numbers, such accidents as threatening an aircraft safety like riot, aircraft hijacking and terrorism have happened constantly. In these circumstances, South Korean government has prescribed "Aviation on Security Act" in accordance with the Convention on International Civil Aviation and other international agreements. This act aims to prevent illegal activities and illegal items on the aircraft to ensure the safety and security of civil aviation. However, this act is not sufficiently regulating all the illegal crimes and illegal items on the flight. For the worse, there is a lack of effective supervisory capacity. Likewise, the inherent problems of the current laws relating to the prevention of the illegal items on the aircraft are appearing on the surface continually. Above all, illegal items on the aircraft are directly connected to the issue of aviation safety and security as well as a safe utilization of the flight service. Thus, when there occurs a serious accident on board, it surely would be led to a huge economic loss not mentioning the loss of lives following the accident. Therefore safety of the flight passengers cannot be guaranteed without ensuring the safety of aircraft facilities and good supervisory mechanism of illegal items on the aircraft. Accordingly, establishing a safe operation order tends to influence economy and tourism of a country in no small measure. Therefore, it is an urgent issue to settle down a reasonable and adequate supervisory regulations regarding the prevention of the illegal items on the aircraft. Consequently, in this article, I studied on a reasonal and effective mechanism to control the prevention of the illegal items and illegal acts on the aircraft in order to ensure a safety and security of civil aircraft.