• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.746-752
• /
• 2016

In this study, soft carbon was prepared by carbonization of carbon precursor (pitch) obtained from PFO (pyrolysis fuel oil) heat treatment. Three carbon precursors prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3 h), 4001 (at $400^{\circ}C$ for 1 h) and 4002 (at $400^{\circ}C$ for 2 h). After the prepared soft carbon was ground to a particle size of $25{\sim}35^{\circ}C$, the soft carbon was synthesised by the chemical treatment with boric acid ($H_3BO_3$). The prepared soft carbon were analysed by XRD, FE-SEM and XPS. Also, the electrochemical performances of soft carbon were investigated by constant current charge/discharge test, cyclic voltammetry and impedance tests in the electrolyte of $LiPF_6$ dissolved inorganic solvents (EC:DMC=1:1 vol%+VC 3 wt%). The coin cell using soft carbon of $25{\sim}35^{\circ}C$ with 3903 soft carbon ($H_3BO_3$/Pitch=3:100 in weight) has better initial capacity and efficiency (330 mAh/g, 82%) than those of other coin cells. Also, it was found that the retention rate capability of 2C/0.1C was 90% after 30 cycles.

• Journal of the HCI Society of Korea
• /
• v.11 no.3
• /
• pp.13-22
• /
• 2016

Vocal and instrument apprenticeship in applied music has been accepted without significant changes since the introduction of applied music education to South Korea. Few discussions or suggestions about other types of teaching than 'one-to-one lessons' or 'education of apprentices by assigned specialists' have been made. Since the introduction of applied music education to South Korea late in the 1980s, the CAI(Computer Aided Instruction) courseware development for applied music education has not actively been under way. The area of applied music has also made rapid progress in terms of music producing or music videos using computers. Actually, the improved computer program is not positively applied to applied music education. This study aimed to present learning methods using the improved functions of music production softwares to improve the traditional apprenticeship system in the area of vocal training in applied music. In particular, it used the technique of auto tune-pitch shift developed for interval correction in sound sources. By giving real-time feedbacks concerning intervals or monitors visually after recording, it intended to present a learning method to induce improvement in accuracy of intervals in vocal training. This study is expected to present a method that allows vocal trainers to overcome temporal and spatial limitations in applied music and make their vocal training more efficient.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.24-33
• /
• 2001

this paper describes a baseline for an implementation of a corpus-based Korean TTS system. The conventional TTS systems using small-sized speech still generate machine-like synthetic speech. To overcome this problem we introduce the corpus-based TTS system which enables to generate natural synthetic speech without prosodic modifications. The corpus should be composed of a natural prosody of source speech and multiple instances of synthesis units. To make a phone level synthesis unit, we train a speech recognizer with the target speech, and then perform an automatic phoneme segmentation. We also detect the fine pitch period using Laryngo graph signals, which is used for prosodic feature extraction. For break strength allocation, 4 levels of break indices are decided as pause length and also attached to phones to reflect prosodic variations in phrase boundaries. To predict the break strength on texts, we utilize the statistical information of POS (Part-of-Speech) sequences. The best triphone sequences are selected by Viterbi search considering the minimization of accumulative Euclidean distance of concatenating distortion. To get high quality synthesis speech applicable to commercial purpose, we introduce a domain specific database. By adding domain specific database to general domain database, we can greatly improve the quality of synthetic speech on specific domain. From the subjective evaluation, the new Korean corpus-based TTS system shows better naturalness than the conventional demisyllable-based one.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.129-136
• /
• 2007

In this paper, a simple but effective Dataline Redundancy Circuit (DRC) is proposed for a dual-port 1T-SRAM embedded in Display ICs. The DRC designed in the dual-port $320{\times}120{\times}18$-bit 1T-SRAM is verified in a 0.18-um CMOS 1T-SRAM process. In the DRC, because its control logic circuit can be implemented by a simple Shift Logic Circuit (SLC) with only an inverter and a NAND that is much simpler than the conventional, it can be placed in a pitch as narrow as a bit line pair. Moreover, an improved version of the SLC is also proposed to reduce its worst-case delay from 12.3ns to 5.9ns by 52%. By doing so, the timing overhead of the DRC can be hidden under the row cycle time because switching of the datalines can be done between the times of the word line setup and the sense amplifier setup. The area overhead of the DRC is estimated about 7.6% in this paper.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.847-853
• /
• 2011

In this study, a hybrid powder-extrusion process involving the control of temperature dwelling time for improving the formability of Zn-22Al powder was developed and the effect of dwelling time on the mechanical properties of a spur gear with a pitch circle having a diameter of 1.8 mm was investigated. General extrusion experiments were carried out at different temperatures such as 290, 300, and $310^{\circ}C$. Spur gears with good qualities and without any surface defects were obtained in the case of extrusion temperature of $310^{\circ}C$ and ball-milling duration of 32 h. The Vickers hardness distribution was non-uniform, and after the sintering process, an internal crack was generated because of the different deformation energy between gear central part and teeth. To overcome the abovementioned problems, research on controlling the dwelling time of the extrusion temperature in the powder-extrusion process was carried out. Good-quality spur gears were obtained when the dwelling time was 15 min.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.503-510
• /
• 2006

Readout circuit is to convert signal occurred in a defector into suitable signal for image signal processing. In general, it has to possess functions of impedance matching with perception element, amplification, noise reduction and cell selection. It also should satisfies conditions of low-power, low-noise, linearity, uniformity, dynamic range, excellent frequency-response characteristic, and so on. The technical issues in developing image processing equipment for focal plane way (FPA) can be categorized as follow: First, ultraviolet (UV) my detector material and fine processing technology. Second, ReadOut IC (ROIC) design technology to process electric signal from detector. Last, package technology for hybrid bonding between detector and ROIC. ROIC enables intelligence and multi-function of image equipment. It is a core component for high value added commercialization ultimately. Especially, in development of high-resolution image equipment ROIC, it is necessary that high-integrated and low-power circuit design technology satisfied with design specifications such as detector characteristic, signal dynamic range, readout rate, noise characteristic, ceil pitch, power consumption and so on. In this paper, we implemented a $8\times8$ FPA prototype ROIC for reduction of period and cost. We tested unit block and overall functions of designed $8\times8$ FPA ROIC. Also, we manufactured ROIC control and image boards, and then were able to verify operation of ROIC by confirming detected image from PC's monitor through UART(Universal Asynchronous Receiver Transmitter) communication.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.181-189
• /
• 2016

An analytical model was developed by Sim to estimate the two-phase damping ratio for upward two-phase flow perpendicular to horizontal tube bundles. The parameters of two-phase flow, such as void fraction and pressure loss evaluated in the model, were calculated based on existing experimental formulations. However, it is necessary to implement a few improvements in the formulations for the case of tube bundles. For the purpose of the improved formulation, we need more information about the two-phase parameters, which can be found through experimental test. An experiment is performed with a typical normal square array of cylinders subjected to the two-phase flow of air-water in the tube bundles, to calculate the two-phase Euler number and the two-phase friction multiplier. The pitch-to-diameter ratio is 1.35 and the diameter of cylinder is 18mm. Pressure loss along the flow direction in the tube bundles is measured with a pressure transducer and data acquisition system to calculate the two-phase Euler number and the two-phase friction multiplier. The void fraction model by Feenstra et al. is used to estimate the void fraction of the two-phase flow in tube bundles. The experimental results of the two phase friction multiplier and two-phase Euler number for homogeneous and non-homogeneous two-phase flows are compared and evaluated against the analytical results given by Sim's model.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.120-128
• /
• 2015

This study reports the combustion characteristics, such as burner temperature and the concentration of exhausted gas ($O_2$, $CO_x$, $NO_x$) due to the different types and pitches of the fuel supply feeder of the wood pellet boiler. The 1st grade wood pellets composed of mainly larch have been used for the experiment. In case of using the spring feeder, mean temperature of burner was approximately $821.76^{\circ}C$, and the mean concentration of oxygen, carbon monoxide, carbon dioxide and nitrogen oxide were approximately 8.88%, 93.35ppm, 12.15% and 139.83 ppm, respectively. The test result with the spring feeder was shown to approach the condition of complete combustion compared to that of a screw feeder and were in good agreement with authentication judgement standard. Furthermore, the combustion efficiency was improved according to the growth of screw pitch. The control of air flow rate from the blower and ventilator is needed to achieve the complete combustion.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.475-482
• /
• 2007

The thermal and optical properties of glucose penta(cholesteryloxycarbonyl)alkanoates (CAGLn, n = 2~8, 10, the number of methylene units in the spacer) were investigated. All the CAGLn formed monotropic cholesteric phases with left-handed helical structures. CAGLn with n = 2 or 10, in contrast with CAGLn with $3{\leq}n{\leq}8$, did not display reflection colors over the full cholesteric range, suggesting that the helical twisting power of the cholesteryl group highly depends on the length of the spacer joining the cholesteryl group to the glucose chain. The isotropic-cholesteric transition point ($T_{ic}$) decreased with increasing n and showed no odd-even effect. The plot of transition entropy at $T_{ic}$ against n had a sharp negative inflection at n = 7. The optical pitches (${{\lambda}_m}^{\prime}$ s) of CAGLn with $3{\leq}n{\leq}8$ decreased with increasing temperature. However, the temperature dependence of the ${\lambda}_m$ of the derivatives exhibited pronounced dependence on n. The transitional properties and the temperature dependence of the ${\lambda}_m$ observed for CAGLn were discussed in terms of the differences in arrangement of the cholesteryl groups and the conformation of the molecules.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.7 no.1
• /
• pp.128-131
• /
• 1996

소아들의 음성장애의 대부분은 음성과 기능에 의한 성대의 오용 및 남용으로부터 기인한다. 그러나 음성장애에 대한 인식의 부족으로 인하여 소아의 음성장애 발견율은 극히 낮은 수준에 머므르고 있다. 치료에 있어서도 행동의 통제가 그다지 쉽지 않기 때문에 많은 어려움이 따른다. 본 연구는 소아의 음성장애의 발생경위와 문제의 설명과 차팅에 의한 남용의 감소에 초점을 둔 치료사례이다. 5세 아동의 심한 음성장애로 의뢰되어졌다. 음성증후는 목쉰소리, 기식화된 소리, 일시적인 발성일탈(phonation break) 등이 두드러졌다. 이비인후과 전문의의 스트로보스코프(stroboscope) 검진결과 초기 양측성 성대결절이 성대 앞쪽으로부터 1/3 지점에서 발견되었으며 비지피치(Visi-Pitch)로 측정된 퍼터베이션(perturbation 수치가 16.8이었다. 사례사 조사 과정에서 아동이 활동적이며 자주 고함을 지르고 자동차놀이를 주로하며 많은 시간을 보낸다는 것이 밝혀졌다. 중재 프로그램은 우선 문제를 설명하고 인식시키는 것과 고함을 지르거나 자동차놀이를 하면서 자동차 소음을 흉내내는 등의 음성남용 회수를 감소시키는 것에 초점을 두었다 17회의 치료로 성대결절이 감소되었고 퍼터베이션은 3.8로 저하되었으며 아동 스스로 음성남용을 통제할 수 있다는 임상적 판단하에 치료를 종결하였다. 1개월 후 추후 검사에서 남용적인 습관이 여전히 나타나지 않았으며 음성상태도 양호하였다. 소아 음성장애의 치료는 소아가 이해할 수 있는 용어로 문제의 인식을 확실히 시키고 행동을 체계적으로 통제할 수 있는 치료프로그램을 실행시키는 임상가의 자질이 대단히 중요하다. 그러나 그에 못지 않게, 많은 시간을 아동과 함께 보내는 부모나 교사의 협력이 치료의 성패를 좌우할 수 있다.조구와 처리구간에 차이가 없었다. 그러나 유지방 함량의 경우 대조구가 3.22%, 처리구가 3.37%로 처리구가 0.15% point 증가했으나 유의차는 없었다. Fan ＋ sprinkler가 설치된 시설에서 사육된 젖소에서 생산된 우유내 체세포수는 대조구에 비해 26.63%가 감소되었으나 유의차는 발견할 수 없었다. 이상의 시험 결과에서 볼 때 fan ＋ sprinkler를 이용한 방서 방법은 고온 stress를 완화시켜 유생산성의 증가에 기여할 수 있는 하나의 방법이라고 본다.을 알 수가 있었다.없다. 본 논문의 대상은 바로 이러한 합성 동사성명사의 논항구조와 동사성명사에 의해 하위범주화된 논항들의 문법적 실현양상이다..그 결과 심리적 특성과 사용자 수용 특성은 아바타 수용도에 부분적으로 영향을 미친다는 것 결과가 나타났다.웨어 프로세스 평가와 개선 모델의 개발을 위한 기초적인 자료를 제공할 것으로 예상된다 또한, 본 연구 결과는, 우리나라 소프트웨어 조직들이 실제로 무엇을 필요로 하는지를 밝힘으로써, 우리나라의 소프트웨어 산업을 육성하기 위한 실효성 있는 정책 입안을 위한 기초 자료를 제공할 것으로 예상된다.다.를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not