• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.813-821
• /
• 1995

본 연구의 목적은 심리육체적 방법(Psychophysical method)을 이용하여 다양한 중량물운반 유형에서의 최대허용하중을 구하는 것이며 이의 타당성을 생리학적 방법(physiological method)을 이용하여 검토하는 것이다. 또한, 인체측정과 근력측정 자료를 이용하여 각 운반유형에서의 최대허용 하중을 예측하는 모형을 개발하고자 한다. 본 연구에서는 네 가지의 운반유형(Front carrying, One-hand side carrying, Two-hands side carrying 그리고 Back carrying)과 두가지의 보행 속도 (50.0 그리고 79.2 m/min)를 주요변수로 8가지의 작업에 대해 무작위로 선택하여 각 작업에 대한 최대허용 하중을 시간과 경비의 감소측면에서 폭넓게 사용되고 있는 심리육체적 방법으로 구하였다. 피실험자는 운반작업의 경력이 있는 실제 작업자군(n=7)과 그렇지 않은 학생군(n=10)으로 구분하여 건강한 남성 피실험자를 대상으로 연구를 실시하였다. 주실험전에 인체측정과 근력측정을 실시하였다. 이후에 심리육체적 방법과 생리학적 방법을 실시간(on-line)으로 실시하였다. 연구결과로 학생군과 작업자군간의 신체조건은 뚜렷한 차이를 보이지 않았으나 근력은 작업자가 우월하였다. 심리육체적 방법을 사용하여 도출된 최대허용 하중은 학생군, 작업자군 모두 운반유형의 변화에 따라 유의함을 보였다.(학생군:p=.0001 작업자군:p=.0001). 반면에 속도의 변화는 유의하지 않았다(학생군:p=.7954 작업자군:p=.9231). 또한 학생군과 작업자군 모두 Back carrying에서 가증 큰 하중을 운반하였다(학생군:8.16kg 작업자군:12.9kg). 심박수를 이용한 생리학적 연구에서는 평균 심박수가 거의 100 이하를 유지하므로써 피실험자들이 8시간 작업기준으로 보아 무리가 없는 최대허용 하중을 결정하였음을 보였다. 또한 각 운반작업에 대한 최대허용 하중을 예측하는 회귀모형을 제시하였다.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.89-98
• /
• 2017

The offshore plant structure has been transported to the site by barge because it is hard to manufacture in site. When the structure was transported on the sea, offshore plant structures and connection were experienced repetitive submarine load. For this reason, it was known for that the axial force of high-strength bolted connection was declined. Therefore, in this study, high-strength bolted connection was evaluated the shear fatigue performance under longtime fatigue load during marine transport. The experimental variables were selected intial axial force, surface type, and bolt type because they ar important factors in the change of axial force of bolts. As a experimental results of considering various variables, the variation of axial force showed within 1%. Therefore, the high-strength bolted connection was verified structural safety under longtime fatigue load.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.999-1000
• /
• 2011

영구자석을 삽입하는 IPM(Interior Permanent Magnet : 이하 IPM) 방식의 동기전동기 설계에서 브리지의 형상 결정은 기계적인 안정성을 확보하고 출력 요구사양을 만족시키기 위해 구조해석과 자기회로 해석을 병행하여 검토하는 것을 요구한다. 본 논문에서는 IPM타입 동기전동기를 대상으로 회전자 원심력이 정적상태로 인가되는 정하중 조건과 속도변화가 시간에 따라 변하는 동하중 조건일 경우를 구분하여 설계 여유를 분석하였으며, 영구자석의 접착여부에 따라 브리지에 발생하는 응력 분포의 차이를 해석하였다. 또한, 동하중 상태에서 재료의 응력-피로 특성을 통해 피로 한계 조건을 설계단계에서 예측하였다.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.88-92
• /
• 2012

Long-term performance of polymer under constant sustained load has been the main research focus, which created a need for the accelerated test method providing proper lifetime assessment. Cycling fatigue loading is one of the accelerated test method and has been of great interest. Microstructure change of high density polyethylene under cyclic fatigue loading and creep was examined utilizing a tensile device specially designed for creep and fatigue test and also can be attachable to the X-ray diffractometer. In this way, the crystal morphology change of polyethylene under creep and cyclic fatigue load was successfully monitored and compared. Despite the marked differences in macroscopic deformation between the creep and cyclic fatigue tests, crystal morphology such as crystallinity, crystal size, and $d$-spacing was as nearly identical between the two test cases. Specimens pre-deformed to different strains, i.e., before yield point (BYP), at yield point (YP) and after yield point (AYP), however, showed markedly different changes in crystal morphology, especially between AYP and the other two specimens.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.103-113
• /
• 1987

Fatigue tests using a single-peak loading and a two-step loading were carried out to examine the fatigue crack growth behaviar and to find the appropriate analysis method. C-T specimens were made using structural steel SWS58 for the tests. From this, just after a single-peak loading acceleration effect was occured and after some times retardation effect was found. And eminent retardation effect was found after High-Low two-step loading. The transition effect of crack growth due to this variable loading was occured owing to the residual stress and the plastic zone size at the crack tip. And the behaviors of these are well explained by Elber's Crack Closure Model. Also I could find that the Wheeler's Retardation Model is a simple and appropriate theory among analysis methods of fatigue crack growth under the variable loading.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1411-1417
• /
• 2010

CFRP (Carbon Fiber Reinforced Plastic) has received considerable attention in various fields as a structural material, because of its high specific strength, high specific stiffness, excellent design flexibility, favorable chemical properties, etc. Most products consisting of several parts are generally assembled by mechanical joining methods (using rivets, bolts, pins, etc.). Holes must be drilled in the parts to be joined, and the strength of the components subjected to static and fatigue loads caused by stress concentration must be decreased. In this study, we experimentally evaluated the variation in the residual strength of a holenotched CFRP plate subjected to fatigue load. We repeatedly subjected the hole-notched specimen to fatigue load for a certain number of cycles, and then we investigated the residual strength of the hole-notched specimen by performing the fracture test. From the results of the test, we can observe the initiation of a directional crack caused by the applied fatigue load. Further, we observed that the residual strength increases with a decrease in the notch effect due to this crack. It was evaluated that the residual strength increases to a certain level and subsequently decreases. This variation in the residual strength was represented by a simple equation by using a model of the decrease in residual strength for plain plate, which was developed by Reifsnider and a stress redistribution model for hole-notched plate, which was developed by Yip.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.557-558
• /
• 2009

Fatigue analysis of trunnion on Saemangeum bridge was performed. Trunnion is the some kind of bracket structure between the gate and the bridge peer with varying load by sea water level variation. The result shows some difference with ordinary structures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.499-503
• /
• 2001

Fatigue behavior of reinforced concrete (RC) elements has been experimentally and analytical investigated. Fatigue behavior influenced by longitudinal reinforcement ratio, strength of concrete and load ratio P／sub u／／P／sub o／. The purpose of these studies is to propose an empirical formula for fatigue behavior on basis of experimental results. Also an analytical method to predict the crack propagation of RC beams has been developed based on the relationships between bond stress and slip.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.495-499
• /
• 2005

Fatigue behavior of reinforced concrete(RC) elements has been experimentally and analytical investigated. Fatigue behavior is influenced by a longitudinal reinforcement ratio, strength of concrete and a load ratio Pu/Po. The purpose of this study to propose an empirical formula for the fatigue behavior on the basis of experimental results. Also an analytical method to predict the crack propagation of RC beams has been developed based on the relationships between bond stress and slip.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.315-321
• /
• 2010

Co-cured single lap joints under cyclic tensile loads fail initially at the tip of the interface corner between the two adherents. The failure mechanism is complex because it is related to corrosion fatigue. Corrosion behavior at the interface affects the failure of the joints because corrosion deteriorates fatigue resistance. In this study, we clarified the cause of interfacial corrosion in co-cured single lap joints under cyclic tensile loads. The failure mechanism was also analyzed by observing the failed surfaces of specimens and the stress distribution along the interface. The surface roughness at the interface and the stacking sequence of the composite adherent were examined to investigate their effects on failure of the joint.