| 1 |
Jones, R., Chiu, W.K. and Paul, J., 1993, “Designing for Damage Tolerant Bonded Joint,” Composite Structures, Vol. 25, pp. 201-207.
DOI
ScienceOn
|
| 2 |
He, S. and Rao, M.D., 1994, “Residual Stresses and Delamination Problems Induced by Co-Curing of Damped Composite Laminates,” Journal of Composite Materials, Vol. 28, pp. 112-129.
DOI
ScienceOn
|
| 3 |
Kim, H.S., Lee, S.J. and Lee, D.G., 1995, “Development of a Strength Model for the Co-Cured Stepped Lap Joints Under Tensile Loading,” Composite Structures, Vol. 32, pp. 593-600.
DOI
ScienceOn
|
| 4 |
Scott, M.L., Raju, J.A.S. and Cheung, A.K.H., 1998, “Design and Manufacturing of a Post-Buckling Co-Cured Composite Aileron,” Composites Science and Technology, Vol. 58, pp. 199-210.
DOI
ScienceOn
|
| 5 |
Shin, K.C. and Lee, J.J., 2000, “Tensile Load Bearing Capacity of Co-Cured Double Lap Joints,” Journal of Adhesion Science and Technology, Vol. 14, pp. 1539-1556.
DOI
ScienceOn
|
| 6 |
Bannantine, J.A., Corner, J.J. and Handrock, J.L.,Fundamentals of Metal Fatigue Analysis, PrenticeHall, Englewood Cliffs, NJ.
|
| 7 |
Fontana, M.G., 1986, Corrosion Engineering, thirded., McGraw-Hill Book Company, New York.
|
| 8 |
Shin, K.C. and Lee, J.J., 2000, “Prediction of the Tensile Load Bearing Capacity of a Co-Cured Single Lap Joint Considering Residual Thermal Stresses,” Journal of Adhesion Science and Technology, Vol. 14, pp. 1691-1704.
DOI
ScienceOn
|
| 9 |
Crane, L.W., Hamermesh, C.L. and Maus, L., 1976, “Surface Treatment of Cured Epoxy Graphite Composite to Improve Adhesive Bonding,” SAMPE Journal, Vol. 12, pp. 6-9.
|
| 10 |
Parker, B.M. and Waghorne, R.M., 1982, “Surface Treatment of Carbon Fiber-Reinforced Composites for Adhesive Bonding,” Composites, Vol. 13, pp. 280-288.
DOI
ScienceOn
|
| 11 |
Renton, J.W. and Vinson, J.R., 1975, “On the Behavior of Bonded Joints in Composite Material Structures,” Engineering Fracture Mechanics, Vol. 7, pp. 41-60.
DOI
ScienceOn
|
| 12 |
1995, Annual book of ASTM standards (General Products, Chemical Specialties, and End Use of Products), American Society for Testing and Materials, Philadelphia, PA, Vol. 15, pp. 205-208.
|
| 13 |
Fuchs, H.O. and Stephens, R.I., 1980, MetalFatigue in Engineering, John Wiley & Sons, NewYork.
|
| 14 |
Waterhouse, R.B., 1981, Fretting fatigue, Applied Science, London.
|
| 15 |
Choi, J.H. and Lee, D.G., 1997, “Torque Capacity of Co-Cured Tubular Lap Joints,” Journal of Composite Materials, Vol. 31, pp. 1381-1396.
DOI
ScienceOn
|
| 16 |
Hills, D.A., 1994, “Mechanics of Fretting Fatigue,” Wear, Vol. 175, pp. 107-113.
DOI
ScienceOn
|
| 17 |
Cho, D.H. and Lee, D.G., 1998, “Manufacturing of Co-Cured Composite Aluminum Shafts with Compression During Co-Curing Operation to Reduce Residual Thermal Stresses,” Journal of Composite Materials, Vol. 32, pp. 1221-1241.
DOI
ScienceOn
|
| 18 |
Olivier, P. and Cottu, J.P., 1998, “Optimisation of the Co-Curing of Two Different Composites with the Aim of Minimizing Residual Curing Stress Levels,” Composites Science and Technology, Vol. 58, pp. 645-651.
DOI
ScienceOn
|
| 19 |
Ciavarella, M. and Demelio, G., 2001, “A Review of Analytical Aspects of Fretting Fatigue, with Extension to Damage Parameters, and Application to Dovetail Joints,” International Journal of Solids and Structures, Vol. 38, pp. 1791-1811.
DOI
ScienceOn
|
webmaster
