• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제33권2호
• /
• pp.123-129
• /
• 2015

The Kalman filter has been widely used in the kinematic GPS positioning due to its flexibility and efficiency in computational points of view. At the same time, the relative positioning technique also provided the high precision positioning results by removing the systematic errors in the measurements significantly. However, the positioning quality may be degraded following to longer in baseline length. For this case, it is required that the remaining atmospheric effects, such as double-difference ionospheric delay and zenith wet delay, should be properly modeled by examining the characteristics of the stochastic processes. In general, atmospheric effects are estimated with the assumption of random walk, or the first-order Gauss-Markov stochastic process, which requires the precise modeling on the corresponding process noises. Therefore, we determined and provided the parameters for modelling the process noises for atmospheric effects. The auto-correlation functions are empirically determined at first, and then the parameters are extracted from the empirical auto-correlation function. In fact, the test results can be either applied directly, or used as guidance values for the modeling of process noises in the kinematic GPS positioning.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제46권3호
• /
• pp.52-58
• /
• 2009

If a moving target has a linear characteristics, the Kalman filter can estimate relatively accurate the location of a target, but this performance depends on how the dynamic status characteristics of the target is accurately modeled. In many practical problems of tracking a maneuvering target, a simple kinematic model can fairly accurately describe the target dynamics for a wide class of maneuvers. However, since the target can exhibit a wide range of dynamic characteristics, no fixed SKF(Simple Kalman filter) can be matched to estimate, to the required accuracy, the states of the target for every specific maneuver. In this paper, a new AKF(Active Kalman filter) is proposed to solve this problem The process noise covariance level of the Kalman filter is adjusted at each time step according to the study result which uses the neural network algorithm. It is demonstrated by means of a computer simulation that the tracking capability of the proposed AKF(Active Kalman filter) is better than that of the SKF(Simple Kalman Filter).

• Journal of Advanced Navigation Technology
• /
• 제22권3호
• /
• pp.228-232
• /
• 2018

Dealing with quntization error in a control system properly becomes much more important as many devices are connected through network and controlled. Thus, in this paper, we study a data rate condition on quantizer to achieve practical stability in a discrete time linear time invariant system with state feedback control. First, required data rate is shown to depend on eigenvalue of the closed loop system, the size of the initial state vector, the magnitude of initial quantization error, and control gain in the absence of process noise. It additionally depends on the maximum magnitude of process noise when noise is not zero. Asymptotic analysis shows that a new design method may be needed to reduce the date rate for a networked control in the presence of quantization error and noise.. We provide a simple numerical evaluation of uniform quantizer and logarithmic qunatizer to assess their characteristics of practical stability depending on data rate in the presence of noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.480-481
• /
• 2014

• Journal of IKEEE
• /
• 제6권1호
• /
• pp.102-110
• /
• 2002

An effective scheme to detect and diagnose multiple failures in a dynamic system is described for the case where the measurement noise is correlated sequentially in time. It is based on the modified interacting multiple model (MIMM) estimation algorithm in which a generalized decorrelation process is developed by employing the autoregressive (AR) model for the colored noise and applying measurement difference method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2001년도 추계학술발표논문집 (상)
• /
• pp.645-648
• /
• 2001

본 논문에서는 포맷 변환기를 사용하여 여러 가지 영상처리 필터링을 구현하였다. 이러한 설계기법은 집적회로를 이용한 대규모 화소처리배열을 근거로 하여 실현하였다. 집적구조의 두가지 형태는 연산병렬프로세서와 병렬 프로세스 DRAM(또는 SRAM) 셀로 분류할 수 있다. 이러한 포맷 변환기 설계는 효율적인 제어 경로 수행을 능력을 가지고 있으며 하드웨어를 복잡하게 한 필요 없이 고급 기술로 사용 될 수 있다. 실험 결과 1)단순한 평활화는 더 높은 공간의 주파수를 억제하면서 잡음을 감소시킬 뿐 아니라 에지를 흐리게 할 수 있으며, 2) 평활화와 분할 과정은 날카로운 에지를 보존하면서 잡음을 감소시키고, 3) 평활화와 분할과 같은 메디안 필터링기법은 영상 잡음을 줄이기 위해 적용될 수 있고 날카로운 에지는 유지하면서 스파이크 성분을 제거하고 화소 값에서 단조로운 변화를 유지 할 수 있었다.

• The Transactions of the Korea Information Processing Society
• /
• 제4권2호
• /
• pp.456-464
• /
• 1997

We describe a random prcess model that prvides sets of patterms whth prcisely contrlolled within-class varia-bility and between-class distinctions.We used these pattems in a simulation study wity the back-propagation netwoek to chracterize its perfotmance as we varied the process-controlling parameters,the statistical differences between the processes,and the random noise on the patterns.Our results indicated that grneralized statistical difference between the processes genrating the patterns provided a good predictor of the difficulty of the clssi-fication problem. Also we analyzed the performance of the Bayes classifier whith the maximum-likeihood cri-terion and we compared the performance of the neural network to that of the Bayes classifier.We found that the performance of neural network was intermediate between that of the simulated and theoretical Bayes classifier.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제17권1호
• /
• pp.136-142
• /
• 2007

This paper proposes a new approach on nonlinear maneuvering target tracking. In this paper, proposed algorithm is the Kalman filter based on the adaptive interactive multiple model using the concept of predicted impact point and utilize modified Kalman filter regarding the error between measurement position and predicted impact point. The unknown target acceleration is regarded as an additional process noise to the target model, and each sub-model is characterized in accordance with the valiance of the overall process noise which is obtained on the basis of each acceleration interval. To compensate the decreasing performance of Kalman filter in nonlinear maneuver, we construct optional algorithm to utilize proposed method or Kalman filter selectively. To effectively estimate the acceleration during the target maneuvering, the rapid increase of the noise scale is recognized as the acceleration to be used in maneuvering target's movement equation. And a few examples are presented to show suggested algorithm's executional potential.

• The KIPS Transactions:PartA
• /
• 제9A권2호
• /
• pp.259-266
• /
• 2002

In this paper we implemented various image processing filtering using the format converter. This design method is based on realized the large processor-per-pixel array by integrated circuit technology. These two types of integrated structure are can be classify associative parallel processor and parallel process DRAM (or SRAM) cell. Layout pitch of one-bit-wide logic is Identical memory cell pitch to array high density PEs in integrate structure. This format converter design has control path implementation efficiently, and can be utilize the high technology without complicated controller hardware. Sequence of array instruction are generated by host computer before process start, and instructions are saved on unit controller. Host computer is executed the pixel-parallel operation starting at saved instructions after processing start. As a result, we obtained three result that 1) simple smoothing suppresses higher spatial frequencies, reducing noise but also blurring edges, 2) a smoothing and segmentation process reduces noise while preserving sharp edges, and 3) median filtering may be applied to reduce image noise. Median filtering eliminates spikes while maintaining sharp edges and preserving monotonic variations in pixel values.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• 제39권4호
• /
• pp.380-385
• /
• 1990

This Paper presents a general algorithm for the parameter estimation of an antoregressive moving average process observed in additive white noise. The algorithm is based on the Gauss-Newton recursive prediction error method. For the parameter estimation, the output measurement is modelled as an innovation process using the spectral factorization, so that noise free RPE ARMA estimation can be used. Using apriori known properties leads to algorithm with smaller computation and better accuracy be the parsimony principle. Computer simulation examples show the effectiveness of the proposed algorithm.